Farmall & IHC Tractors Discussion Board |
Re: oil pressure
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Janicholson on October 23, 2006 at 17:50:15 from (66.173.50.158):
In Reply to: oil pressure posted by Mike Johnson on October 23, 2006 at 16:25:08:
Cubs are notorious for loosing oil prime, There is a 1/4" plug in the oil gallery (I think near the oil filter) which can be used to refill all the lines and get it going. Either there, or in the fitting where the pressure gauge screws into the block. Put a small rubber hose on a squirt oilcan and pump in several oilcans full of a thick oil like 20-50. Continue pumping until there is some resistance to the trigger on the pump, then pump slower for several more pumps on the oilcan. This should prime the pump. Return the fitting you removed and start it. Do not run it for more than 30 seconds or so without oil pressure. If it fails to prime, repeat the above. Others may have other methods this is mine. The oil pump is in the block and cannot be accessed from the pan. Splitting the tractor is the only way to get there. Good luck, JimN
Replies:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|