Posted by Eric Skokan on May 08, 2009 at 18:53:32 from (70.57.10.155):
well, I need some ideas and help to figure this one out. The governor spring on my B snapped and I replaced it with a new one from the dealer. When I installed it it made all of the adjustments (speed control and surge bumper) way off. For the speed control adjustment, I had to spin the little yolk back about 20 revolutions to made it so the clevis pin would go in with the carb at max position. for the surge bumper, I had to turn it all the way in, not only so that there weren"t ant threads left for the acorn nut, but so the bumper took over for the low idle.
So, I just finished re-bushing the input shaft and while it is a little better, it still is hunting. I know something is wrong, but what?
Here are some additional symptoms: the engine is hunting at low idle AND at max idle, and everywhere in between, most of the speed change responce seemes to happen in the middle of the range. That is, first few notches don"t do much then some in the middle make it race, then the last few don"t do much. Prior to the sprig snapping, the speed change response was fine and very smooth. Now it is abrupt (The front wheel came off the ground a little with a disc attached to the back when I was testing it out!)
My theory is that the old spring that broke was not the right one and the old owner made it work through adjusting it or skullduggery. Now that the new spring (is it the correct one?) is in it older mis-adjustments are showing.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.