Posted by TOM THORN on January 27, 2010 at 13:32:00 from (74.32.152.83):
I have a 706 282 d it has aknocking noisein the motor when cold the tractor was completly done over 3 years ago when it gets warm its not as bad. i tore it down and found it had all new parts like the man said except they didnt replace the rist pin bushings in the rods so i put new ones in and had them rheemed on a sun like they should be done. i found the sleeves could be pulled out with my hands i put the motor all back together with a new headgaskit torqued it all down with a fresh valve job set the valves by the fireing order as they should be and had all the injectors tested ok the motor runs like a top but it still has the knock the guy put atisco sleeve kitt in it with pistons the pistons seem to be overly loose in the top of the bore the rings were barely seated so i know it hasent ben long since it was done the noise is in the top end iknow it has alot of compresion but the noise is still ther could it be the sleeves should i put a new kitt in it the sn is 62597 on eng help thanks tom ih54.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.