Posted by ericlb on January 12, 2012 at 11:37:30 from (12.189.32.36):
In Reply to: rock box posted by Bob Bancroft on January 12, 2012 at 11:26:27:
how big is the tractor? if its a fair sized one, ive seen one where the guy got the back half of a old '50's or 60's era 6 yd dump truck made it into a trailer, and used the tractors hydraulic remotes to run the dump , worked pretty good, if you have a smaller tractor, say 4 to 5000 lbs, you could make the same setup out of an old puckup rear half, and fab up a set of hinges for the rear and a hydraulic cylinder for the front, , a small tractor, like a N series ford, your going to be limited by the tractors weight and hp, but ive seen a guy build a steel box that mounted to the 3 point hitch, he would load it by hand untill the front end got light then go over to where he was taking the rocks, to dump, he set the box on the ground, unhooked the top link and raised the lift arms and drove foward, this was on about 5 acres so he didnt need much, as far as capacity, depends on the size of your rock needs i guess,
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.