Old, Sure alot of factors can come into play, such as reloaded ammo, recoil pad condition (new vs older)Thickness of recoil pad if any, Both using factory loads, recoil would be no different than being hit with a basketball being pushed 2 feet from your shoulder,same amount of energy from back pressure.
The complaints come from most who never fired a 300,but heard alot of war stories from friends of friends that heard it from the other guy.
My Son fired the 300 many times at age 11-12-13-14 years of age during gun season and range time,no bruising or complaints of hurt..Seems to me that most people who put down the 300 recoil has never fired one.
This is my Sons 480 Ruger handgun pistol with reloaded ammo, not factory. Bullet weight in grains 325 Velocity in fps 1200 Powder charge in grains 21.7 Weight of firearm in lbs 3.5
Recoil Impulse in (lbs sec) 2.12 Velocity of recoiling firearm (fps) 19.18 Free recoil energy in (ft/lbs) 20.62
This is for a 44 Mag
Bullet weight in grains 240 Velocity in fps 1200 Powder charge in grains 22.1 Weight of firearm in lbs 3.5
Recoil Impulse in (lbs sec) 1.67 Velocity of recoiling firearm (fps) 15.36 Free recoil energy in (ft/lbs) 12.83
This is also hand loaded ammo,not factory. As you can see it is also very close as to that amount of recoil for the 480 Ruger,imagine if it was maxed out on powder weight it would match the 300 data very close if not over the recoil data. Saying it feels heavier is a perceived suggestion,not actual measurement.
If you are speaking in actual factory rounds,it also varies from manufacturer to manufacturer, The recoil on an -06 difference is minuscule compared to the 300 Win Mag. We have both -06 and 300 rifles to us there is very little difference with factory rounds. As you can see in the photo, the -06 has no recoil pad and the 300 has about a 3/4" recoil pad attached. It's just some people have to argue with facts. LOU
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.