Posted by Clarkbug on December 29, 2008 at 19:27:11 from (209.23.8.29):
Hello All.
For those of you that dont frequent the Farmall board, I have a pair of BN's that I picked up, and am now tearing into as they are both stuck. Drained water or antifreeze out of both of the pans, and one had cylinders full of water. I pulled the head off of that one, and have it in on the work bench.
I picked up a valve spring compressor, and pulled out the valves tonight.
I guess I need to know what to do next. Im guessing I should have a shop check the head and magnaflux it, but what else? Do they need the valves in it as well? How can I tell if I can just lap the valves in or if I should get a valve job done? I was able to pull some of the valves right out once the keepers were removed, but others I had to tap out with a brass drift.
If I get the head worked over (assuming its not cracked) and can un-stick the pistons, whats next? Im guessing I should drop the pan, but what do I look for once I do?
Sorry for the novice questions, but I usually just tinker, and this is a bigger job than I figured it would be!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A City Guy's First Tractor - by Fred Hambrecht. After living in apartments in Atlanta for more years than I care to remember, the wife and I decided to move to the country. Humming "Green Acres is the place for me..." we purchased a 29 acre tract about 60 miles south of Atlanta. Next came the house, I could talk about that ordeal for another two weeks... But, I want to talk about my tractor! We didn't even own a lawnmower, and all of a sudden we had enough grass to feed all the starving children of the bovine world. Naturally, I talked
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.