FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 203 Tractor Parts

[Categories] [All Massey Ferguson Models] [Print]

Brakes

Brake Disc - For tractor models 135, 150, 165, 175, 180, 203, 205, 2500, 30, 302, 304, 31, 3165, 356, 40, 50, 65, 85, 88, 90. Replaces 1753117M91. Brake Disc is 7.125 inches X 4.000 inches in diameter and has 27 splines. (Item #: 105627, Ref: 1021314M1) $22.60

Brake Lever Return Spring - This Brake Lever Return Spring is use on multiple Massey Ferguson Tractors. It is 3 5/16 inches in length. It replaces original part numbers 533618M1, 517503M1, 184171M1, 1868691M1, 773222M1. (Item #: 124541, Ref: 773222M1) $6.80

Brake Pedal Lock - For tractor models 135 UK, (202 gas), (203 diesel), 20D, 20F, 240, 240S, 250, 253, 30E, 35, 40E, (50 serial number up to 533414), (65 serial number up to 692932), FE35, TO35. (Item #: 173120, Ref: 181960M1) $14.80

Brake Rod - Brake rod with spacer and nut, 6-1/4 inch from end of rod to hole center. Disc brake lever to actuating links, except models with cast axle housings. For tractors: MF65, MF135, MF150, MF165, MF175, MF180, MF1080 industrials: 30, 40, 50, 203, 205, 302, 304, 3165 Forklift: 25. (Item #: 105646, Ref: 184334M1) $23.10

Clutch

Clutch Disc - Clutch disc measuring 9 inches with a 1 3/8 inch hub and 10 splines. This is a 6 spring clutch. For the following tractors using Continental Gas engine: TE20, TEA20, TO20, TO30, 202, 203, 205, 20C, 50C. Replaces OEM 180241M91. (Item #: 111601, Ref: 91A7550WHD) $29.80

Clutch Kit, Dual, Coarse Spline - Includes NEW: 526666M91 Pressure Plate is 11 inch and 10 spline, 516068M93 Clutch Disc is 11 inch and 10 spline, Release and Pilot bearings, and clutch alignment tool. Fits the following tractors that use a 10 spline PTO disc: 135, 150, TO35. This part is for a late production T035 (Serial number 177537 and above). This unit will not fit early production TO35 with stamped finger clutch. Not for Deluxe models. (Item #: 111063, Ref: 1212-1400) $310.00

Clutch Transmission Disc11 Inch - This is an 11 inch rigid disc with a 10 spline, 1.125 inch hub. It is used in single clutch and split torque clutches. 165, 175, 180, 202 Indust/Const, 203 Indust/Const, 2135 Indust/Const, 2200 Forklift, 2200 Gas, 2500 Forklift, 255, 265, 30 Indust/Const, 31, 3165 Indust/Const, 35, 40B Indust/Const, 4500 Forklift, 50C Indust/Const, 50D Indust/Const, 65 Replaces 189948M91, 513580M92 (Item #: 130134, Ref: 189948M91) $100.00

Pilot Bearing - Clutch pilot bearing, heavy-duty, long lasting stainless steel. Bore: 0.670 inches (17mm), OD: 1.57 inches (39.88mm), 0.470 inches width. For tractors: MF50, MF65, MF85, MF88, MF235, MF245, MF255, MF285, MF1080 industrials: 20, 20C, 30, 30B, 31, 35 utility and turf, 40, 40B, 50, 50A, 50C, 202, 203, 204, 205, 302, 304, 2135, 2200. Replaces 832953M3, 1440487X1, 828123M1, 828123M2, 832960M3 (Item #: 107933, Ref: C5NN7600A) $3.40

Pilot Bearing - For tractor models 1004, 1004T, 105, 1080, 1085, 130, 133, 135, 140, 145, 148, 150, 152, 155, 157, 158, 165, 168, 175, 177, 178, 180, 185, 188, 20, 202, 203, 204, 205, 20B, 20C, 20D, 20E, 20F, 20H, 2135, 2165, 220, 2200, 230, 235, 240, 245, 25, 250, 253, 255, 260, 2620, 2625, 2640, 2645, 265, 2680, 2685, 270, 2720, 2725, 275, 282. Replaces OEM 828123M2. (Item #: 107933, Ref: C5NN7600A) $3.40

Pressure Plate Assembly, 11 Inch - This is an 11 inch Pressure Plate for Single clutches used on Massey Ferguson 2200 Forklift, 2500 Forklift, 4500 Forklift, 202 Industrial, 203 Industrial, 2135 Utility, 3165 Industrial, 65 Tractor, Replaces 192196M91 (Item #: 122860, Ref: 192196M91) $397.00

Pressure Plate Assembly, Remanufactured - For Massey Ferguson tractor models 165, 175, 180, 202, 203, 302, 304, 3165, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 10, Pressure Plate Type: Dual Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206854) $240.01

Pressure Plate Assembly, Remanufactured - For Massey Ferguson tractor models 135, 150, 202, 203, 2135, 2200, Compatible with Massey Ferguson Construction and industrial models 20, 40, 50, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 10, Pressure Plate Type: Dual Stage, (Item #: 206875) $201.01

Pressure Plate Assembly, Remanufactured - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 50, 135, 202, 203, 2135, Pressure Plate Size: 9", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, (Item #: 206882) $95.01

Pressure Plate Assembly, Remanufactured - For Massey Ferguson tractor models TO30, TO35, 35, 50, 65, 135, 150, 202, 203, 302, 304, 2135, 2200, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 10, Pressure Plate Type: Dual Stage, (Item #: 206883) $240.01

Pressure Plate Assembly, Remanufactured, 180263M91 - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 35, 50, 135, 202, 203, 2135, Replaces Massey Ferguson OEM number 180263M91, 185923M91, Pressure Plate Size: 9", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 119390, (Item #: 206881) $111.01

Pressure Plate Assembly, Remanufactured, 184543M91 - For Massey Ferguson tractor models TO30, TO35, 35, 50, 65, 135, 150, 202, 203, 302, 304, 2135, 2200, Compatible with Massey Ferguson Construction and industrial models 40, Replaces Massey Ferguson OEM number 184543M91, 193931M92, 512356M91, 526665M91, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 10, Pressure Plate Type: Dual Stage, For a New version of this sku use Item #: 122859, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206884) $259.50

Release Bearing - Bearing, clutch release, 2.49 inch inside diameter, 4.10 inch outside diameter, 1.5265 inches wide. For single clutch tractors: TO35, MF35, F40, MF50, MF65, MF135 industrials: 2135, 3165. (A2336-37/A2336-147) For 2135, 3165, F40, MF135, MF35, MF50, MF65, TO35, 202, 203, 302, 304. Replaces 833085M1, 833085, 180505M2, N2336-147 (Item #: 168448, Ref: 833085M2) $169.00

Release Bearing - Sealed Release Bearing for single and dual clutch, 2.50 inch inside diameter, 3.936 inch outside diameter. For tractor models 1080, 1085, 1100, 1130, 130, 133, 135, 140, 145, 148, 150, 152, 155, 157, 158, 165, 168, 175, 177, 178, 180, 185, 188, 20, 202, 203, 204, 205, 20B, 20C, 20D, 20E, 20F, 20H, 2135, 2165, 2200, 220, 230, 235, 240, 245, 250, 255, 260, 265, 270, 275, 282, 285, 290, 298, 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35. Replaces original part numbers 892862M2, 892862M1, 86534551 and 195508M1. (Item #: 112189, Ref: N1585) $25.30

Release Bearing - Release bearing for tractor models 101 Jr and Sr, 135 Special, 20, 201, 202, 203, 203G, 205, 20C, 2135, 298, 303D, 303G, 35, 44, 44D, 44K, 44LP, 50, 50C, 510, 540, 550, F40, MH20, MH30, TE20, TEA20, TO20, TO30. Transmission disc release bearing. Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Replaces original part numbers 18171A, 195207M1. (Item #: 107007, Ref: N1087) $21.00

Release Bearing Carrier - Carrier, for clutch release bearing. Carrier bore 2.130 inch (2-1/8 inch approximate); outside diameter 2.503 inch (2-1/2 inch). PLEASE CHECK CARRIER BORE BEFORE ORDERING. For single or dual clutch. Tractors: TO35, MF35, MF50, MF65. Industrials: 20, 202, 203, 302, 2135. Use with bearing 892862M2 for DUAL CLUTCH ONLY. This is the old style for retainers with bronze bushing. (Item #: 165363, Ref: 183129M2) $24.10

Cooling System

Fan - Outside diameter of 15 3/8 inches, 1 5/8 inch pilot hole, 4 mounting bolt holes 5/16 inch at 2 7/16 center to center across. Fits tractor models: 135 with Perkins gas or diesel engine, 150 with Perkins gas engine, 165 with Continental gas or diesel engine, 203 with direct injection diesel, 205 with direct injection diesel, 2135/diesel engine, 2200 with Perkins gas or diesel engine, 235 with diesel engine, 245 with diesel engine, 255 with AD4-203 diesel engine, 3165 with Continental gas or diesel engine. Replaces OEM part number 521031M91. (Item #: 153077, Ref: 194046M91) $36.22

Radiator - For tractor models FE35, TO35, MF135, MF203, MF205, MF35 and MF35 UK. All with A3.152 Perkins Diesel engines. It is 17.5 inches tall and the core size is 15 inches wide. Replaces: 186732M91. OVERFLOW TUBE AND PETCOCK NOT INCLUDED. (Item #: 101792, Ref: 894319M92) $205.00

Radiator - For tractor models 20 and 2135 Industrial with Perkins Gas or Diesel. For 135 gas and diesel, 135 UK gas, 148 with diesel. Core measures 18.5 inches high, 15 3/8 inches wide. 135 Vineyard with Perkins Gas serial number 9A117590 and up and with diesel serial number 9A117610 and up). Replaces 194275M94, 194275M93, 1660499V94, 186732M91, 1660499M92, 885856M94, 897188M94, 897188M91. (Item #: 101794, Ref: 194275M93) $225.00

Radiator Hose, Bypass - 1.125 inch inside diameter. For tractor models (135 with Perkins Engine), 4830FC, 5830, 5860, 5870, 6030FC, (550 with AD3.152 engine), 2500, 20, 20D, 20F, 202, 203, 205, 2135, 2200, 2244, 30B. (Item #: 128491, Ref: 731256M1) $4.90

Radiator Hose Lower - Hose, radiator lower. For Perkins Diesel Engine in tractors: MF35, MF135, MF230, to serial number 9A243032, MF235 except Orchard Industrials: 20, 35 utility, 202, 203, 205, 2135. (Item #: 159314, Ref: 186968M1) $9.30

Radiator Mounting Pads, Pack of 2 - This pack of 2 radiator mounting pads is for tractor models 135, 20, 2135, TO35, 35, 230, (235, 245 except orchard), 240, 250, 253, 20C turf, 20D, 30E, 35, 40E, 202, 203, 204, 205. Two are used per tractor on the bottom of the radiator. (Item #: 109978, Ref: 180705M1) $2.50

Thermostat,180 Degree - For: F40, FE35, TEA20, 150, Deluxe, TO35, 1080, 1085, 1100, 1105, 1130, 1135, 130, 135, 148, 150, 154, 1545, 165, 168, 175, 187, 185, 188, 20, 202, 203, 204, 205, 20C, 20D, 20E, 2135, 2200, 2244, 230, 235, 240, 245, 250, 2500, 253, 254, 255, 265, 275, 285, 290, 298, 30, 30B, 30E, 30H, 320, 35, 350, 35X, 360, 362, 40, 40E, 4500, 470, 4830FC. Replaces 1446165V91, 1446127M1, 1446165M1, 1446127V91, 2485648, 1894961M1, 2485659, 325505M2, 32550, 1446165M91, 1446127M91, 2485666, 40085, 826306M1, 828139M1, 886000M1 (Item #: 110084, Ref: 1446165M91) $7.50

Thermostat Body Cap - For 135, 20, 202, 203, 205, 20D, 20C, 20F, 2135, 2200, 230, 231, 235, 240, 245, 250, 2500, 253, 30B, 30D, 30E, 30H, 35, 4040E, 4500. Thermostat Body Cap (Perkins Diesel) also replaces 37747581. (Item #: 155437, Ref: 731000M1) $34.64

Thermostat Housing - Thermostat housing also replaces 37766361. For tractor models 135, 150, 154-4, 1545, 20, 200, 203, 205, 20C, 20D, 20F, 2135, 2200, 2244, 230, 231, 235, 240, 240P, 245, 250, 2500, 254-4, 30B, 30D, 30E, 30H, 35, 40, 40E, 4500, 4830FC, 50, 5830, 5830FC, 5860, 5870. Replaces 746835M1, 37766361, 37766362, 37766363, 737192M1. (Item #: 173276, Ref: 746835M1) $68.00

Water Pump Gasket - Used on Perkins 144 and 152 cubic inch, three cylinder engines. Replaces 957E8507, 72080255, 0941183, 731275M1, 4222931M1, 36862532 (Item #: 155091, Ref: 4222931M1) $1.80

Water Pump Kit - This water pump repair kit fits the following tractor models: 2500, 20C, 20E, 20F, 203, 205, 2135, 30B, 30E, 30H, 40E, 135, 135UK, 148, 150, 154-4, 154-4S, 230, 231, 235, 240, 240P, 245, 250, 253, 254-4, 263, 340, 342, 350, 353, 353LX, 360 all with Perkins engines. It services pumps: 739527M91, 747542M91, and 742558M91. Replaces 731774M91 (Item #: 191242, Ref: 731774M91) $24.80

Water Pump Pulley - Single groove. For tractor models (135UK serial number up to 152UA5275D), (35, 50 all with Perkins Diesel Engine), (203, 205 all with Regular Diesel Engine). (Item #: 116876, Ref: 731280M1) $45.45

Water Pump with Pulley - For tractor models 135 UK, 150, 203, 205, 35, 50, FE35. Water Pump with single pulley and gasket. 2.5 inch diameter hub. Replaces Perkins 41312154. Includes pulley part number 731280M1 2.5 diameter hub. The fan mounting bolt holes are not in a square pattern. For Perkins A3.152 Diesel. Replaces 731280M1, 747542M91, 829258M1. (Item #: 122905, Ref: 734932M91) $55.00

Water Pump - With Pulley - This new water pump includes pulley part number 735034M1 with 3.125 inch hub diameter and a 1 5/8 inch pilot. The pulley has a square fan pulley mounting pattern. For tractor models 35, 50, 135, 150, 203, 205, 235, 245, 240, 20, 20C, 20E, 20F, 2135, 230, 231, 240, 245, 253, 360, 154-4, 30B, 30D, 30E, 30H, 40E, 2500, 254-4 all with PERKINS AD3.152 or AG3.152 engines. This is a new water pump. Replaces 3641338M91, 3641823M91, 37711330, 739527M91, 747542M91, U5MW0023, 41312487, 4132159, 735034M1, 735034V1, 747542M9. (Item #: 150185, Ref: 3641823M91) $37.00

Decals and Emblems

No
Picture
Decal Set - Hood only set for Model 203. (Item #: 183666, Ref: R3923) $60.00

Engine Serial Number Tag, Blank - Comes with 4 rivets, black anodized aluminum, 3.885 inches long, 1.885 inches high, customer must stamp the number. For tractor models TO35, 35, F40, Early 135, 202, 203, 204, MH50, 2135. For all models with 4 cylinder Z134 Continental Gas Engine. (Item #: 178545, Ref: MFSNTAG) $34.10

Drive Train

Bearing Cup, Differential - For tractor models FE35, TE20, TO20, TO30, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 302, 31, 3165, 356, 360, 362, 3630, 3650, 375, 383, 390, 390T, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 670, TO35 serial number <-169467. Replaces 1850090M91. (Item #: 117943, Ref: 185778M1) $30.40

Bearing Kit - Needle Bearing Kit. For transmission reverse idler gear. Not for shuttle, instant reverse, or 12-speed transmissions. (1) required. For tractors: TO35 serial number 171549 and up, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240. (Item #: 125327, Ref: 830735M91) $34.92

Bolt, Ring Gear to Case - 1/2 inch X 1 45/64 inch NF. 6 required. USE WITH NUT 891947M1. For tractor models 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 1500, 1505, 165, 175, 1800, 1805, 20, 202, 203, 204, 205, 20C, 2135, 220, 2200, 230, 231, 235, 240P, 245, 2500, 255, 265, 275, 282, 283, 285, 30, 302, 304, 3050, 3060, 3070, 3080, 3090, 30B, 30D, 31, 3120, 3125, 3140, 3165, 320, 350, 3505, 3525, 3545, 356, 3630, 3650, 3655, 3660, 3680, 40, 40B, 4500, 50, 50C, 50D, 50H, 60, 65, 6500, 6500H, 690, 698, 699, 70, 80, 85, 88, Super 90, F40, FE135, TO35. Price shown is for each, sold only in multiples of 6 items. (Item #: 168810, Ref: 825776M1) $2.10

Countershaft - Countershaft, 6 speed and manual shuttle. 17/20 spline, 15 tooth. For the following tractors: 1080, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 220, 2200, 230, 235, 245, 30, 35, 50, F40, FE135, TO35. (Item #: 178325, Ref: 183054M92) $192.22

Countershaft - Countershaft, 6 speed transmission. 20/17/10 spline, 15 tooth, 12.750 inches long. For the following tractors: 135, 202, 203, 204, 205, 2135, 2200, 3165 35, 50, 65, FE135, MH50, TO35. (Item #: 173663, Ref: 183085M1) $140.60

Coupling, Rear Drive Shaft - 3.750 inches long, 10 spline. For tractor models 135, 150, 165, 175, 180, 203, 205, 20E, 20F, 2200, 235, 24, 240, 245, 25, 250, 2500, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 356, 360, 375, 383, 390, 390T, 392S, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 60, 60H, 60HT, 65, 6500, 6500H, 670, 675, 6800H, 690, 698, 699. (Item #: 160154, Ref: 1680189M1) $20.98

Coupling, Wheel - 5.00 inch long, 3 groove, 10 spline. For tractor models 135, 148, 150, 155, 158, 165, 168, 175, 178, 188, 202, 203, 204, 205, 2200, 35, 365, 50, 65, 765, F40, FE135, FE35. (Item #: 160182, Ref: 880069M2) $38.10

Differential Coupling Cap - 6 lug. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 203, 205, 20F, 220, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 320, 356, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 6500H, 670, 6800H, 690, 698, 699, Super 90. (Item #: 172335, Ref: 898712M2) $90.00

Differential Lock Fork Coupler - 6 lug. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 203, 205, 20F, 220, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 320, 356, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50E, 50H, 60, 60H, 60HT, 6500, 6500H, 670, 6800H, 690, 698, 699. (Item #: 172334, Ref: 897003M3) $77.00

Differential Pinion Gear - Verify that the gear you are replacing has 10 teeth and a 2.92 inch diameter. For tractor models 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 1500, 1505, 165, 175, 180, 1800, 1805, 203, 205, 2135, 2200, 2500, 302, 304, 3165, 35, 356, 40, 50, 65, 70, 80, 85, 88, Super 90. (Item #: 173507, Ref: 181275M1) $59.00

Differential Pinion Shaft - For tractor models 150, 165, 203, 205, 2200, 65. Replaces 184202M1. (Item #: 173151, Ref: 1868115M1) $20.30

Drive Shaft, Reverse Gear - 6.580 inches in length, 1.00 inch in diameter. For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 290, 298, 30, 31, 35, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 170391, Ref: 180445M1) $20.87

Filter Screen - Filter screen, transmission. For tractor models 202, 203, 204, 205, 2200, 302, 304, 30B, 30D, 30, 40B, 40, 50A, 50C, 50D, 50. (Item #: 182880, Ref: 1754633M1) $42.70

Gear, 1st - This gear is 1st gear for 8 speed transmission. Replaces 520700M1, 183042M1. Gear has 44 teeth and is a 18 spline. For tractor models FE35, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 203, 2135, 2200, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 31, 3165, 360, 362, 375, 383, 390, 390T, 40, 40B, 50, 50C, 50D, 50E, 65, (20F, 40E, 50H ALL UK MODELS), 35 GAS/DIESEL, 282 MEX. (Item #: 151828, Ref: 1682688M1) $77.00

Gear, 2nd and 4th - This gear is 2nd and 4th, for an 8 speed transmission. Gear is 36 and 46 teeth, 18 spline. For tractor models FE35, MH50, 1080, 1085, MF11, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 202, 203, 204, 205, 230, 235, 240, 245, 250, 2500, 255, 265, 275, 283, 285, 290, 30, 31, 3165, 35, 40, 40B, 50C, 50D, 550, 565, 575, 590 (65, 765 ALL with MULTI POWER), FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 179620, Ref: 1682691M1) $132.00

Gear, 3rd - This gear is 3rd speed for, 8 speed transmission. Gear has 33 teeth, 17 spline and is 5.075 inches in diameter. For tractor models FE35, MH50, TO35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 65, 765, FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 151824, Ref: 180415M1) $28.70

Gear, Reverse - For tractor models FE35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 365, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 65, 765, FE135 COVENTRY, TO35 serial number 17159>, 2135 TURF UTILITY NARROW. This gear is for a 8 speed transmission with 13 and 21 teeth. (Item #: 151823, Ref: 183040M1) $75.00

No
Picture
Gear Shift Knob - Round ball, 3/8 inch NF thread. For tractor models TO20, TE20, TEA20, TEF20, TO30, TO35, FE35, F40, 130, 135, 150, 165, 175, 20, 202, 203, 204, 205, 2135, 220, 2200, 2500, 30, 302, 303, 304, 30E, 3165, 320, 333, 35, 356, 40, 404, 406, 44, 444, 50, 50A, 50E, 555, 65, 85, 88, 90, Super 90, 95, 98, F40, FE135, MH50, TO35. (Item #: 150683, Ref: 180006M91) $4.00

Main Drive Pinion Shaft Seal - Measures 1.125 inch x 1.562 inch x .250 inch. For tractor models 20, 20C, 202, 203, 2135, 30, 31, 3165, TO35, 135, 150, 165, 175, 230, 235, 245, 35, 50, 65. Replaces: 195501M1, 195870M1. (Item #: 165141, Ref: 195501M1) $5.48

Needle Bearing - Measures 1 1/4 inch inside diameter, 1-5/8 outside diameter, 3/4 inch wide. Replaces 1677724M1, 196076M1, 832775M (Item #: 180488, Ref: 196076M1) $22.50

Planetary Cover Plate, Front - For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. Replaces 180408M2, 180408M1. (Item #: 173500, Ref: 180408M2) $18.30

Planetary Cover Plate, Rear - For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Item #: 180666, Ref: 184012M4) $21.10

Planetary Pinion Gear, (Epicyclic) - 12 tooth. For tractor models 135, 150, 165, 175, 178, 180, 203, 205, 20E, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 30H, 3165, 356, 40B, 40E, 4500, 50A, 50C, 50D, 50E, 50H, 5650, 60, 60H, 65, 6500, 6500H, 670, 6800, 690, 85, 88. (Item #: 170397, Ref: 894769M1) $32.98

Planetary Ring Gear - 54 teeth, 1.723 inches thick. For tractor models 2500, (202, 203, 2135, 2200, 3165, all 6 speed manual shuttle), (135, 165 all 6/8 speed multi power), (150 6/8 speed serial number CB22864 and up multi power), (30 6/8 speed transmission serial number up to CA304 and with manual shuttle transmission serial number up to CB22865). (Item #: 172329, Ref: 897021M1) $111.00

Planetary Selector Gearshift - For tractor models: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Item #: 173169, Ref: 180446M1) $17.30

Planetary Thrust Washer - This Planetary Thrust Washer is for tractor models 135, 150, 165, 202, 203, 204, 205, 2135, 302, 304, 3165, 35, 356, 50, 65, 85, 88, Super 90, F40, FE35, TO35. (Item #: 172988, Ref: 180414M1) $16.20

Rear Drive Coupling - Drive coupling, differential, rear. For tractors: TO35, MF50, MF65 industrials: 202, 204 Work Bull, 203, 205, 356 Tractor shovel, 2200 Treever, 2135 utility. 5 inches long, 10 splines 1-1/4 inch and 2 inches long. Replaces 183088M1, 880069M1, 880069M2 (Item #: 160182, Ref: 183088M1) $38.10

Rear Oil Seal - Rear axle or differential carrier plate oil seal. 3.198 inch outside diameter, 2.125 inch inside diameter, .812 inch width. For tractors: MF65, MF85, Super 90, MF135 orchard, MF150, MF165, MF175, MF180 industrials: 30, 40, 50, 203, 205, 302, 304 also MF1080, MF1085, MF235 orchard, MF255, MF275, MF285 with dry brakes. Used as clutch bearing support assembly seal on tractors: MF2675, MF2705, MF2745, MF2775, MF2805. For 10, 126, 130, 220, 224, 228. (Item #: 128529, Ref: 832954M3) $14.50

Seal, Rear Axle Oil, Inner - This oil seal fits: [Industrial; as an inner rear axle shaft oil seal with dry brakes: 2135, 2200, 3165, MF20, MF20C, MF30 (2 used per tractor, sold individually)], as a transmission input shaft front cover oil seal: 85, 88, Super 90, [as an inner rear axle shaft oil seal with dry brakes: 135, 150, 202, 203, 204, 205, 230, 231, 235, 240, 245, 35, 50, F40, FE35, TO35 (2 used per tractor, sold individually)]; Replaces: 195678M1, 195678M2. 2.125 inches inside diameter, 2.879 inches outside diameter, 0.438 inches wide. (Item #: 108415, Ref: 195678M2) $6.30

Shift Fork, 1st, Reverse, 2nd and 3rd - For tractor models FE35, F40, MH50, TO35, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 202, 203, 204, 205, 2135, 2200, 230, 235, 245, 255, 265, 270, 275, 285, 290, 298, 30, 31, 3165, 35, 50, 65. (Item #: 151023, Ref: 180437M1) $34.40

Shift Fork, 8 Speed - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390T, 398, 399, 40, 40F, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 670, 690, 698, 699, (FE135 Coventry). (Item #: 165985, Ref: 897065M2) $30.80

Shift Rail, 1st and Reverse - Replaces: 180442M2. For the following tractors:1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 220, 2200, 230, 231, 235240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 35, 40, 50, 65, F40, FE135, MH50, TO35 (Item #: 172890, Ref: 1678867M1) $48.11

Trans Gasket Kit - Gasket set, transmission overhaul. For tractor models 202, 203, 204, 205, 2200, 302, 304, 30B, 30D, 30, 40B, 40, 50A, 50C, 50D, 50. (Item #: 182662, Ref: 830979M93) $67.00

Transmission Pump Seal - This O-Ring is used for mounting Transmission Pump. Replaces 1754392M1, 1754392V1, 1754392M1, 81816228, 1P77836A (Item #: 179708, Ref: 81816228) $6.30

Transmission Rear Axle Gasket - This gasket is used on multiple Massey Ferguson tractors. Dimensions measure 10.750 inches X 16 inches. It replaces original part numbers 1861986M1, 1861986M2, 3599804M1, 3599804M2, 3599804V2, 8884457M1, 181363M1, 521181M1, VPH1405 (Item #: 111906, Ref: 1861986M1) $6.90

Electrical System

Neutral Safety Switch - This Neutral Safety Switch is for bullet type terminal. Replaces 181140V94, 53208520, 181140M1, 181140M91, 181140M94, 181140M93, 181140M92. (Item #: 111507, Ref: 181140M94) $11.50

Neutral Safety Switch Boot - For tractor models: 35, 40, 50, 65, 85, 175, 180, 230, 235, 245, 255, 265, 275, 285, 20, 20c, 30, 30B, 30D, 31, 40, 40B, 50, 50A, 50C, 50D, 60, 2135, 3165, 22, 2500, 4500, 6500, 88, 135, 150, 165, Super 90, 202, 203, 204, 205, 302, 304. (Item #: 178119, Ref: 180776M1) $13.10

Starter Drive - Drive Assembly attaches with keyway and set screws. For tractors: TO20, TO30, TO35, 50, MH50, 35, 65, F40, 202, 203. Services Delco Starters 1107755, 1107654, 1109457. NOTE: Please check the starter that is in your tractor, some starters use a pin to attach drive not a set screw. (Item #: 113968, Ref: 1035335M91) $33.10

Starter Drive - For tractor models Super 90, 1100, 1130, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 285, 50, 85, 88, TO35 GAS OR DIESEL, 750 serial number 1696157>, (850, 860 ALL WITH DELCO STARTER 1113676), (203, 205, 410, 510, 540, 550, 760 ALL WITH PERKINS ENGINES). Starter drive used with starters 1113402, 1113672, 1113391. Replaces 1755245M1. (Item #: 111105, Ref: 1755245M1) $29.80

Starter Solenoid - Solenoid Assembly, flange mounting to starter. Replaces Delco 1114356 on starters 1108649, 1107503, 1107512, 1108649. Gas and diesel applications. 12-volt. Replaces 1025381M91, 1047083M91, 1755027M91. (Item #: 105675, Ref: 1047083M91) $16.50

Starter Switch - Switch Assembly with key, for ignition and light. Switch has 3 terminals. For GAS tractors: TE20, TEA20, TO20, TO30, TO35, MF35, MF50, MF65, 202, 203, 204, 205. (Item #: 111516, Ref: 180681M93) $14.00

Voltage Regulator, 12 Volt - 12 Volt - 4 Terminal - Flat Mount. 4 Terminal: Light - Battery - Field - Armature (underneath base). Fits TO35, MF25, F40, MF35, MF50, MF65, MF85, MF88, MF Super 90, MF135, MF150, MF165, MF175, MF180, MF202, MF204, MF203, MF205, MF2135, MF3165. Combines SP300, SP410, SP510. 12 Volt models with generators. The Three Post side of this regulator may be parallel or slightly splayed. (Item #: 105581, Ref: 182548M92) $28.00

Engine Bearings

Main Bearing Set, .010, Perkins 152 Gas or Diesel - .010 inch Main Bearing Kit. For 200B, 200, 203, 205, 20C, 20, 2135, 2200, 2244, 2500, 30B, 35, 40, 4500, FE35, MF135, MF150, MF230, MF235, MF245, MF250, MF35, MF50 with AG3-152 Perkins Gas Engine or A3-152 and AD3-152 Diesel Engines. Thrust washers not included. Complete for 1 engine. Replaces 746157M91 (Item #: 107163, Ref: 746157M91) $15.00

No
Picture
Main Bearing Set, .020, Perkins 152 Gas or Diesel - .020 inch Main Bearing Kit. For 200B, 200, 203, 205, 20C, 20, 2135, 2200, 2244, 2500, 30B, 35, 40, 4500, FE35, MF135, MF150, MF230, MF235, MF245, MF250, MF35, MF50 with AG3-152 Perkins Gas Engine or A3-152 and AD3-152 Diesel Engines. Thrust washers not included. Complete for 1 engine. Replaces 746158M91 (Item #: 107164, Ref: 746158M91) $18.40

No
Picture
Main Bearing Set, .030, Perkins 152 Gas or Diesel - .030 inch Main Bearing Kit. For 200B, 200, 203, 205, 20C, 20, 2135, 2200, 2244, 2500, 30B, 35, 40, 4500, FE35, MF135, MF150, MF230, MF235, MF245, MF250, MF35, MF50 with AG3-152 Perkins Gas Engine or A3-152 and AD3-152 Diesel Engines. Thrust washers not included. Complete for 1 engine. Replaces 746159M91 (Item #: 107165, Ref: 746159M91) $12.80

Main Bearing Set, STD, Perkins 152 Gas or Diesel - Fits 152 CID 3 cylinder gas or diesel engines. Standard Main Bearing Kit (4 pr). Thrust washers not included. Complete for 1 engine. For tractor models MF250, MF235, MF245, 20C, 30B, 200B, 2500, 4500, 20, MF230, 200, 2244, 2200, 2500, 203, 205, 40, MF135, MF150, 35, FE35, MF35, MF50. Replaces 746156M91 (Item #: 107162, Ref: 746156M91) $15.30

No
Picture
Rod Bearing Set, .010, Perkins 152 Gas or Diesel - Rod Bearing Set .010 inch. For: 200B, 200, 203, 205, 20C, 20, 2135, 2200, 2244, 2500, 30B, 35, 40, 4500, FE35, MF135, MF150, MF230, MF235, MF245, MF250, MF35, MF50 with AG3-152 Perkins Gas Engine or A3-152 and AD3-152 Diesel Engines. Complete for 1 engine. Replaces 737071M91 (Item #: 106997, Ref: 737071M91) $10.60

No
Picture
Rod Bearing Set, .020, Perkins 152 Gas or Diesel - Rod Bearing Set .020 inch. For: 200B, 200, 203, 205, 20C, 20, 2135, 2200, 2244, 2500, 30B, 35, 40, 4500, FE35, MF135, MF150, MF230, MF235, MF245, MF250, MF35, MF50 with AG3-152 Perkins Gas Engine, or A3-152 and AD3-152 Diesel Engines. Complete for 1 engine. Replaces 737072M91 (Item #: 106998, Ref: 737072M91) $10.60

No
Picture
Rod Bearing Set, .030, Perkins 152 Gas or Diesel - Rod Bearing Set .030 inch. For: 200B, 200, MH203, 205, 20C, 20, 2135, 2200, 2244, 2500, 30B, 35, 40, 4500, FE35, MF135, MF150, MF230, MF235, MF245, MF250, MF35, MF50 with AG3-152 Perkins Gas Engine, or A3-152 and AD3-152 Diesel Engines. Complete for 1 engine. Replaces 737073M91 (Item #: 106999, Ref: 737073M91) $10.20

Rod Bearing Set, STD, Perkins 152 Gas or Diesel - Rod Bearing Set STANDARD. For: 200B, 200, 203, 205, 20C, 20, 2135, 2200, 2244, 2500, 30B, 35, 40, 4500, FE35, MF135, MF150, MF230, MF235, MF245, MF250, MF35, MF50 with AG3-152 Perkins Gas Engine, or A3-152 and AD3-152 Diesel Engines. Complete for 1 engine. Replaces 737070M91 (Item #: 106996, Ref: 737070M91) $11.20

Thrust Washer Set - 4 Pieces - Tabbed. Fits 152 CID 3 cylinder, 203 CID 4 cylinder gas or diesel engines. For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, MF165, 40B, 50.735113M1 (Item #: 107167, Ref: 31137211_21) $7.00

Engine Gaskets

Combustion Cap Gasket - This Copper combustion cap gasket fits 65, 65UK, 35, 50, 203, 205. Replaces 957E6K003, 81803686, 36241505, 490023, 734178M1, 746473M1. (Item #: 117404, Ref: 957E6K003) $2.60

Crankshaft seal, Front Lip Type, Perkins - Fits 152 CID 3 cylinder or 203 CID 4 cylinder gas or diesel engines. For tractor models 2500, 20, 40, MF135, MF150, 203 and 205 to serial number 659002115, 35, FE35, MF35, MF50, 2135, MF235 engine serial number ending in D, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, 40B, 50, MF165, MF255. (Item #: 107221, Ref: 1851747M1) $9.40

Crankshaft Seal, Rear Rope Type, Perkins - Sold individually - requires 2. Fits 152 CID 3 cylinder, 203 CID 4 cylinder gas or diesel engines. For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, 2135, MF235, 200B, 4500, MF230, 20C, 30B, MF245, 356, MF65, 300, 302, 304, 3165, MF165, 30, 40B, 50, MF255. (Item #: 107228, Ref: 735866M1) $2.60

Gasket Engine Bottom Set, Perkins 152 Diesel - For (203, 205 tractor serial number 659002115), FE35, 35, 50, all with A3-152 Regular Injection Perkins Diesel prior to engine serial numer 19B8552, injectors vertical in cylinder head, 3 cylinder. For engines using 2 piece rope type rear seal. Seals are included in engine kits but are not included in gasket sets. Bottom Engine Gasket Set. Use with part number 747166M91 for complete Engine Gasket Set. (Item #: 167681, Ref: 747187M91) $26.70

Gasket Set, Bottom Engine, Perkins 152 Diesel - Bottom engine set for a 152 cubic inch 3 Cylinder Perkins Diesel engines above serial number 19B8552. For models 200, 203, 205, 20C, 20, 2135, 2200, 2244, 2500, 30B, 35, 40, FE35, MF135, MF150, MF235, MF245, MF35, MF50. Lower engine gasket sets are for engines using 2 piece rope type rear seal. Crankshaft Seals are not included. (Item #: 107305, Ref: 735232M92) $32.60

Gasket Set, Engine Top, Perkins 152 Diesel - 152 CID 3 cylinder diesel engines, 3.6 inch standard bore, .150 inch flange thickness, injectors at angle in cylinder head, 2 piece rope type seal. For tractor models MF135, MF150, MF235 with engine serial number ending with D, 200, 2244, 2200, 2500 prior to serial number 152UA391044DL, 20 prior to serial number 152UA391044DL, 203 and 205 tractor serial number 659002115-, 2135, 40 prior to serial number 152UA391044DL. Replaces 735231M91. Use with bottom set part number 747186M91. (Item #: 107250, Ref: 748008M91) $35.30

Gasket Set, Top Engine, Perkins 152 Diesel - For (203, 205 tractor serial number 659002115), FE35, 35, 50, all with A3-152 Regular Injection Perkins Diesel, injectors vertical in cylinder head, 3 cylinder. Top Engine Gasket Set. Use with part number 747187M91 for complete Engine Gasket Set. (Item #: 107249, Ref: 747166M91) $29.90

Lip Seal Housing Gasket - For Massey Ferguson tractor models 135, 148, 150, 154-4, 155, 158, 165, 203, 205, 230, 235, 240, 245, 250, 253, 254, 254-4, 255, 260, 302, 304, 342, 350, 353, 360, 363, 550, 560, Replaces Massey Ferguson OEM number 3641894M1, 741378M1, 33826111, (Item #: 169750) $3.40

Oil Pan Gasket, Perkins 152 Gas or Diesel - Oil pan gasket. For 20, 200B, 203, 205, 20C, 2500, 30B, 35, 40, 4500, FE35, MF135, MF150, MF230, MF235, MF245, MF35, MF50. (Item #: 107280, Ref: MF3152PG) $8.40

Rope Seal Housing Gasket - This Rope Seal Housing Gasket is used on Perkins 144, 152 and 203 cubic inch, three and four cylinder engines with rope type rear seals. Replaces part numbers 957E6344A, 83934357, 136817168, 36817134, 36817168, 27847, 734664M1, 36817134, 734664M91, 4222068M1, 4222068V1 (Item #: 168419, Ref: 36817134) $4.80

Timing Case to Block Gasket - Gasket for the timing case to block for tractor models Massey Ferguson 35, 135, 148, 230, 240, 250, 254, 254S, 255, 350, 353, 550, 363, and 253 with Engines A3.152 AD3.152 AT3.152 AT3.152.4 Replaces 36814119. Priced each. Price shown is for 2, sold only in multiples of 2 items. (Item #: 168423, Ref: 734238M1) $13.20

Timing Cover Gasket - Used with 3637397M91 timing Cover. Replaces 4224397M1, 36813136, 734661M1 (Item #: 168135, Ref: 734661M1) $9.20

Valve Cover Gasket - This Valve Cover Gasket is used on Tractors: 135, 150, 230, 235, 240, 245, 250, 253, 360 and Industrial Series 20, 203, 205, 2135, 2200, 154-4, 20C, 2500, 254-4, 30B, 30D, MF 40 All with Perkins 152 cubic inch gas or diesel engines. Replaces original part numbers 36811115, 735057M1, 033 - 7689, 2130099, 28108, 72080111 (Item #: 158290, Ref: 735057M1) $5.70

Valve Cover Gasket - This Valve Cover Gasket is used on Massey Ferguson 35, 50, 203 and 205 all with A3.152 Perkins Diesel Engines. Replace Perkins 040491 and Massey Ferguson 731273M1 (Item #: 173313, Ref: 0490491) $3.40

Engine Rebuild Kits

Basic Engine Kit, Less bearings - Perkins 152 Diesel - 152 CID 3 cylinder diesel engines, 3.6 inch standard bore, .150 flange thickness, injectors at angle in cylinder head, 2 piece rope type seal. For tractor models MF135, MF150, MF235 with Engine serial number ending with D, 200, 2244, 2200, 2500 prior to serial number 152UA391044DL, 20 prior to serial number 152UA391044DL, 203 and 205 tractor serial number 659002115-, 2135, 40 prior to serial number 152UA391044DL. Kit includes sleeves, pistons and rings, pins and retainers, pin bushings, gasket set and crankshaft seals. For engines with 2 piece rope type seal. Not for engines with serial number ending in L or S. Engines with L serial number ending use lip type rear seal. Engines with S serial number ending use different pistons, rings and valves with 35 degree face angle. Does not include engine bearings or thrust washers. (Item #: 130508, Ref: BEKP1337D-LCB) $235.00

Basic In-Frame Engine Kit, Perkins 152 Diesel - For (203, 205 tractor serial number 659002115), FE35, MF35, MF50, 35. Perkins A3-152 diesel, serial number up to 193585, regular injection, using 2 piece rope type rear seal, .040 inch sleeve flange thickness, 3.6 inch standard bore. Basic In-Frame Engine Kit includes: Sleeve and Piston Kit with rings, pins and retainers, top engine set and oil pan gasket. (Item #: 191769, Ref: BIFP1335D) $266.00

Basic In-Frame Engine Kit, Perkins 152 Diesel - For (203, 205 tractor serial number 659002115) FE35, 35, 50. Perkins A3-152 diesel, regular injection, injectors vertical in head, 3.6 inch standard bore, using 2 piece rope type rear seal, .150 inch sleeve flange thickness. Basic In-Frame Engine Kit includes: sleeve and piston kit with rings, pins and retainers, top engine set and oil pan gasket. For engines serial number 193585 and up. (Item #: 189683, Ref: BIFP1336D) $195.00

Basic In-Frame Kit, Perkins 152 Diesel - 152 CID 3 Cylinder Diesel Engines, 3.6 inch standard bore, .150 inch flange thickness, injectors at angle in cylinder head, 2 piece rope type seal. For tractor models MF135, MF150, MF230, MF235 with engine serial number ending with D, MF250 engine serial number prefix CE22488U only, 200, 2244, 2200, 2500 prior to serial number 152UA391044DL, 20 prior to serial number 152UA391044DL, 203 and 205 tractor serial number 659002115, 2135, 40 prior to serial number 152UA391044DL. Contains, sleeve and piston kit with rings, pins and retainers, top engine gasket set and oil pan gasket. Not for engines with serial number ending in L or S. Engines with L serial number ending use lip type rear seal. Engines with S serial number ending use different pistons, rings and valves with 35 degree face angle. (Item #: 184679, Ref: BIFP1337D) $434.00

Basic Overhaul Kit, Perkins 152 Diesel - 152 CID 3 cylinder diesel engine 3.6 inch standard bore, injectors vertical in head. Basic Engine Kit. Contains CAST sleeves, .150 inch flange thickness, pistons and rings, pins and retainers, pin bushings, gasket sets, crankshaft seals. For 203, (prior to serial number 65902115) 205, (prior to serial number 65902115) 35, FE35, MF35, MF50. Engine Bearing and thrust washers must be ordered separately. Please see "engine bearings". (Item #: 183957, Ref: BEKP1336D-LCB) $431.00

No
Picture
Engine Overhaul Kit, Perkins 152 Diesel - This engine kit for Perkins AD-152 CID Diesel Engines, 3.6 inch standard bore, .150 inch Flange thickness, injectors at angle in cylinder head, 2 piece rope type seal. For tractor models MF135, MF150, MF235 with engine serial number ending with D, 200, 2244, 2200, 2500 prior to serial number 152UA391044DL, 20 prior to serial number 152UA391044DL, 203 and 205 tractor serial number 659002115-, 2135, 40 prior to serial number 152UA391044DL. Kit contains, pistons, sleeves, rings, pins and retainers, pin bushings, gasket sets, crankshaft seals, intake and exhaust valves (45 degree face angle), valve keys and guides, springs and retainers. For engines with 2 piece rope type seal. Not for engines with serial number ending in L or S. Does not include engine bearings and thrust washers. (Item #: 130520, Ref: EOK1337D-LCB) $325.00

Engine Overhaul Kit, Perkins 152 Diesel - For (203 and 205 tractor Prior to serial number 659002115) FE35, MF35, MF50, 35 Utility, all with A3-152 Regular Injection Perkins Diesel with vertical injectors in cylinder head, 3.6 inch standard bore. (.040 SLEEVE FLANGE THICKNESS). Basic Engine Overhaul Kit. Contains Sleeve and Piston Kit: sleeves, pistons, rings, pins and retainers. Pin Bushings. Complete Gasket Set. Intake and exhaust valves, valve keys, guides and springs. Engine bearings and thrust washers must be ordered separately. (Item #: EOK1335D-LCB) $499.99

Engine Overhaul Kit, Perkins 152 Diesel - For (203, 205 tractor serial number 659002115) FE35, 35, 50; Industrial 35 Utility, all with A3-152 Regular Injection Perkins Diesel with vertical injectors in cylinder head, 3.6 inch standard bore. (.150 SLEEVE FLANGE THICKNESS). Basic Engine Overhaul Kit. Contains Sleeve and Piston Kit: sleeves, pistons, rings, pins and retainers. Pin Bushings. Complete Gasket Set. Intake and Exhaust valves, valve keys, guides and springs. Engine bearings and thrust washers must be ordered separately. Please see "engine bearings". (Item #: 185350, Ref: EOK1336D-LCB) $614.00

No
Picture
Valve Overhaul Kit, Perkins 152 Diesel - Fits 152 CID 3 Cylinder Diesel Engines, 3.6 inch standard bore, injectors vertical in head, .040 inch sleeve flange thickness. Kit contains, intake and exhaust valves, springs, keys and guides. For tractor models (203, 205 tractor serial number 659002115), 35, 50, FE35. (Item #: 120300, Ref: VOKP152) $85.00

Engine Parts

Camshaft - Replaces 31415261. For the following Models with A3.152, AD3.152 or AG3.152 engines: 135, 150, 154-4, 1545, 20, 20C, 20D, 20F, 200, 203, 205, 2135, 2200, 2244, 230, 231, 235, 240, 2400, 245, 250, 2500, 253, 254-4, 30B, 30D, 30E, 30H, 35, 350, 360, 40, 40E, 4830FC, 50, 5500, 5830, 5830FC, 5860, 5870, 6030C, 7830, 7830C, 8830 (Item #: 173283, Ref: 733507M1) $124.00

Camshaft Idler Gear - 90 tooth. For tractor models (135, 148, 150, 154-4, 154-4S, 20, 200, 203, 205, 20C, 20D, 20F, 2135, 220, 2200, 2244, 230, 231, 235, 240, 245, 250, 2500, 253, 254-4, 30b, 30D, 30E, 30H, 35, 40, 40E, 4500, 4830FC, 50, 550 all with A3.152 or AD3.152 gas or diesel engines), 5830, 5830FC, 5860, 5870, 6030FC. Replaces 31164362. (Item #: 172340, Ref: 731205M2) $82.00

Camshaft Timing Gear - 50 tooth, for engine type PE 144 A3.152/AD3.152, replaces 410241. For tractor models 135, 148, 150, 154-4, 1545, 20, 200, 203, 205, 20C, 20F, 2135, 220, 2200, 2244, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 254-4, 30B, 30E, 30H, 35, 40, 40E, 4830FC, 50, 550, 5830, 5830FC, 5860, 5870, 6030FC, TE20. Replaces 3637541M1, 410241, 4224245M1, 731203M1, 957E6256, 81804014, 2190007, 72080139 (Item #: 172327, Ref: 731203M1) $45.01

Combustion Chamber Cap - This Combustion Chamber Cap is used on Massey Ferguson Tractors 65, 35, 50, 203, 205, using Perkins Engines. It replaces original part numbers 37416203, 37416511, 746472M1. (Item #: 184439, Ref: 746472M1) $43.00

Connecting Rod - Verify casting number 0210007. For tractor models (135, 150, 20, 200, 203, 205, 2135, 220, 2200, 2244, 230, 235, 2500, 34B, 35, 356, 40, 50 with engine serial number ending in D, DL or DSL), 65. Has 9 inch CENTER TO CENTER measurement. (IF NEEDING 8.875 inch CENTER TO CENTER, ORDER PART NUMBER ZZ90010). Replaces: M7BJ0052, VPB6000, 3637439M91, 3637439V91, 52813, 59908, 731676M91, 735391M91, 747010M91, 747101M91, 81803971, 957E6200. (Item #: 173358, Ref: ZZ90011) $76.00

Connecting Rod Bolt and Nut Assembly - Used on Perkins Engines, this Bolt and Nut Assembly replaces OEM numbers 84264589, 370664S, 382885S2, 34447ES2B, 385279S2, 390655S2, 81803991, 957E6215, 957E6212, 957E-6215, 0095250, 1476245, 1476245X1, 375756X1, 355756X1, 33221327, 3639947M1, 33221319 (Item #: 183833, Ref: 957E6215) $4.90

Crankshaft Assembly - Crankshaft kit with standard rod and main bearings and thrust washers. For Perkins Diesel A3-152 and AD3-152. Also Perkins 3 Cylinder gas with rope type rear seal. For 200, 203, 205, 20, 2135, 2200, 2244, 2500, 35, 40, MF135, MF150, MF235, MF35. This is for a 2 piece rope seal. (Item #: 168650, Ref: 3638309M91) $441.00

Crankshaft Kit with Bearings - Kit includes main and rod bearings and thrust washers. For 235 with Perkins <152UA381043DL 3.152 Diesel WITH ROPE SEAL, engine serial number ending with DS, (203, 205, 2135, all with Perkins A3.152 or AD3.152 Diesel Engine Sserial number ending with DS), (135, 150, 20, 2244, 35, 40, 50, all with Perkins A3.152 or AD3.152 Engine serial number <152UA381043DL). Uses 2 piece rope seal. Also Perkins 3 Cylinder Gas with Rope type seal. Replaces 084402, 736532M1. (Item #: 168650, Ref: 3638309M91) $441.00

Crankshaft Pulley, 3-Hole - For Perkins Engines. Fits Massey Ferguson Forklifts: 2500 and 4500. Massey Ferguson Industrial: 20 (Gas Engine serial number <152UA22587A, All Diesels), 20C (Diesel) 20D, 20F, 203 (Diesel), 205 (Diesel), 2135 (Utility), 2200, 30B (Diesel), 30D, 30E, 30H, 40 (Gas Engine serial number <152UA22587A, All Diesels), 40E, Tractors: TO35 (Equipped with 102 Loader), 135 (Gas Engine serial number <152UA22587A, All Diesel), 150 (Gas Engine serial number <152UA22587A, All Diesel), 230, 235 (Orchard), 245 (Orchard), 35 (Diesel), 35X (FE) (Diesel), 50 (Diesel), 65 (Engine serial nubmer <2820092). Uses 704812M93 hydraulic adapter plate. Replaces 31147784. (Item #: 118287, Ref: 734628M1) $78.00

Crankshaft Weight Washer - This Crankshaft Weight Washer is used on 35, 50, 135, 150, 230, 235, 245, 231, 240, 250, 253, 360, 362, 202, 203, 204, 205, 20, 2135, 20C, 30B, 40B, 20D, 30E, 40E. It replaces 31731515, 31731516, 733645M1, 733644M1 (Item #: 183801, Ref: 733644M1) $0.70

Cylinder Head - This cylinder head assembly is for the Perkins AD3-152 direct injection diesel engine with the injectors at an angle in cylinder head. This assembly includes valves and valve parts and fits the following tractor models: 135, 150, M230, MF235, MF245; and industrial models: 20, 20C, 30B, 30D, 40, 203, 205, 2135, 2200 Treever; and Forklift models: 2200, 2500, 4500; and Crawler models: 200, 200B, 200C, 2244. It directly replaces cylinder heads 737704M91, 740595M91, and 743201M91. Originally, the 737704M91, 740595M91, and 743201M91 cylinder heads had valves with a 45 degree face angle, however, they are no longer supplied by the OEM. This 3637389M91 cylinder head is the same as supplied by the OEM and has valves with a 35 degree face angle. It Replaces ZZ080082, ZZ080025, 747574M91, and 4222810M91. (Item #: 160304, Ref: 3637389M91) $370.00

Cylinder Head - For tractor models 35, 50, (203 and 205 Industrials (All prior to serial number 1846220). Cylinder Head - Indirect Injection. Complete with Valves and Springs. Perkins A3.152. Replaces 3637784M91, 3638321M91, 731781M91, 743272M91, ZZ80058, E2046T9, M03-00-19, 58462, 68131, 82620, 86553, U5BD0024, ZZ80048. (Item #: 156259, Ref: 3637784M91) $437.00

Cylinder Head Bolt Kit - This Stud and Bolt kit for the cylinder head on AD3.152 Perkins engines. Head bolts replace head studs in some locations. For models 135, 150, 230, 235, 245, 250, 20, 200, 203, 205, 2135, 2200, 2244, 2500, 30B, 40, 40B, 4500. Replaces 734266M1, 32524131, 734309M1, 32524133, 736976M1, 32524138, 734308M1, 32524132, 1440275X1, 0920006, 353426X1, 33221315. (Item #: 183810, Ref: S.43676) $87.00

Engine Backing Plate - This Engine Backing Plate is used on Perkins AD3.152 Direct Injection Engine with Lip Type Seal. It is also known as a Flywheel Housing Adapter Plate. It Replaces: Perkins number 37147974, Massey Ferguson 741401M1. Used on 135, 150, 230, 235, 245, 231, 240, 250, 253, 360, 362, 202, 203, 204, 205, 20, 2135, 20C, 30B, 40B, 20D, 30E, 40E (Item #: 165510, Ref: 741401M1) $156.00

Flywheel Tab Washer - This Flywheel Tab Washer is used on Massey Ferguson 35, 50, 65, 135, 150, 165, 175, 180 230, 235, 245, 255, 265, 275, 231, 240, 250, 253, 360, 362, 270, 282, 283, 375, 383, 390, 390T, 398, 399, 202, 203, 204, 205, 302, 304, 20, 2135, 20C, 30B, 40B, 20D, 30E, 40E, 30, 31, 40, 3165. It Replaces 731192M1, 731192M1, 731192V1 (Item #: 153307, Ref: 731192M1) $1.40

Freeze Plug - This Freeze Plug is 0.891 inches in diameter, 57/64 inch cup type. Used on Perkins engines. Verify size or part number before ordering. Replaces Massey Ferguson OEM nos 731999M1, Replaces JCB OEM nos 02100395, Replaces Leyland OEM nos AJR2098, Replaces Perkins OEM nos 0650664. (Item #: 174344) $1.90

Ring Gear Nut, Flywheel - This nut is for the ring gear to case. Used with BOLT 825776M1. For models- 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 1500, 1505, 165, 175, 1800, 1805, 20, 202, 203, 204, 205, 20C, 2135, 220, 2200, 230, 231, 235, 240P, 245, 2500, 255, 265, 275, 282, 283, 285, 30, 302, 304, 3050, 3060, 3070, 3080, 3090, 30B, 30D, 31, 3120, 3125, 3140, 3165, 320, 350, 3505, 3525, 3545, 356, 3630, 3650, 3655, 3660, 3680, 40, 40B, 4500, 50, 50C, 50D, 50H, 60, 65, 6500, 6500H, 690, 698, 699, 70, 80, 85, 88, Super 90, F40, FE135, TO35. Price shown is for each, sold only in multiples of 12 items. (Item #: 173305, Ref: 891947M1) $1.30

Rocker Shaft - For tractor models 3 Cylinder Perkins 135, 150, 20, 200, 203, 205, 20C, 2135, 220, 2200 engine serial number ending in D, 2244, 230, 235, 245, 250, 2500, 30B, 35, 40, 50. Replaces 3637532M91, 731754M91, 1076971M91, U7LR0002, ZZ90047, 747938M91 (Item #: 133942, Ref: ZZ90047) $11.50

Tappet, Perkins Diesel - Adjustable Tappet. Does not come with adjusting screw or nut. 353430X1 Nut and 32151116 Screw sold separately. Used on A3.144, A3.152, A4.192, A4.203, AD3.152, AD4.203 Gas and Diesel Perkins Engines. Replaces: 0860012, 731150M1, 957E6489, 81804255, 0860012, 41345 (Item #: 165601, Ref: 731150M1) $8.80

Timing Cover, Front - For tractor models 135, 150, 154-4, 203, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 2500, 253, 254-4, 30B, 30D, 360, 40 all with A3.152, AD3.152 or T3.152 3 cylinder Perkins diesel engines. Replaces 3637397M91, 3637397V91, A5FH0245, ZZ90039, 737211M91, 740226M1, 747454M1, 733988M91, 737211M91. Uses 734661M1 Gasket, sold separately. (Item #: 184551, Ref: 3637397M91) $132.00

Timing Cover, Rear - For tractor models 135, 150, 154-4, 203, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 2500, 253, 254-4, 30B, 30D, 360, 40 all with A3.152, AD3.152 or AG3.152 3 cylinder Perkins engines. (Item #: 179030, Ref: 739477M1) $163.00

Valve, Exhaust - Exhaust valve for engines 152, 203 or 305 CID diesel in models 203, 205, 35, 356, FE35, MF35, MF50, MF65, Super 92. (Item #: 166347, Ref: 731152M1) $5.90

Valve, Exhaust, Perkins 152 and 203 Diesel - Fits 152 and 203 CID diesel engines, 3.6 inch standard bore, injectors at angle in cylinder head. For tractor models 200, 2244, 2200, 2500, 203 and 205 tractor serial number 659002115 and up, 20, 40, MF135, MF150, MF235, MF230, 4500, 300, 356, 302, 304, 3165, 65, 165. (Item #: 166347, Ref: 737640M1) $5.90

Valve Guide, Perkins Diesel - Intake and exhaust. 152 CID and 203 CID perkins diesel engines. For tractor models 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, MF165, 40B, 50. (Item #: 166914, Ref: 732445M1) $2.30

Valve, Intake - Intake valve for 152 or 203 CID diesel standard bore 3.6 inch, injectors vertical in head. For 203, 205, 35, 356, FE35, MF35, MF50, MF65, Super 92. (Item #: 167112, Ref: 731151M1) $4.71

Valve, Intake, Perkins 152 and 203 Diesel - Fits 152 and 203 CID diesel engines, 3.6 inch standard bore, injectors at angle in cylinder head. For tractor models 200, 2244, 2200, 2500, 203 and 205 tractor serial number 659002115 and up, 20, 40, MF135, MF150, MF235, MF230, 4500, 300, 356, 302, 304, 3165, MF65, MF165. (Item #: 166921, Ref: 732811M1) $5.50

Valve Keys, Perkins - Fits 152 CID 3 cylinder, 203 CID 4 cylinder gas or diesel engines 3.6 inch standard bore. For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, MF165, 40B, 50. Price shown is for each, sold only in multiples of 4 items. (Item #: 166933, Ref: 731155M1) $0.80

Valve Overhaul Kit, Perkins 152 Diesel - Valve Overhaul Kit. 152 CID 3 cylinder diesel, 3.6 inch standard bore, injectors at angle in cylinder head. Valves have a 45 degree face angle. Contains intake and exhaust valves, springs, keys, and guides. For 200B, 200, 203, 205, 20, 2135, 2200, 2244, 2500, 40, 4500, MF135, MF150, MF230, MF235. This kit may contain 12 or 6 springs depending on our supplier. They interchange. The springs in the 6 spring configuration have the same tension as the combined inner and outer spring in the 12 spring configuration. (Item #: 120224, Ref: VOKP152A) $66.00

Valve Spring Cap - Used on many Perkins Engines, this Valve Spring cap replace: 747697M1, 731156M1, 957E6514, 747697M1, 747697V1, 747697V1, 33423148. (Item #: 191058, Ref: 747697M1) $18.20

Valve Spring, Inner, Perkins - Intake and exhaust. Fits 152 CID 3 cylinder, 203 CID 4 cylinder gas or diesel engines 3.6 inch standard bore. Price shown is for each. \For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, MF165, 40B, 50. (Item #: 166791, Ref: 731153M1) $0.98

No
Picture
Valve Spring, Outer, Perkins - Intake and exhaust. Fits 152 CID 3 cylinder, 203 CID 4 cylinder gas or diesel engines 3.6 inch standard bore. Price shown is for each, sold only in multiples of 2 items. For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 3356, MF65, 300, 302, 304, 3165, MF165, 40B, 50. (Item #: 731154M1) $2.81

Valve Spring Retainer, Perkins Diesel - Fits 152 CID and 203 CID perkins engines. For tractor models 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, MF165, 40B, 50. Price shown is for each, sold only in multiples of 2 items. (Note: 2 halves = 1 retainer) (Item #: 180600, Ref: 731959M1) $5.40

Valve Spring Seat, Lower - Used on Perkins engines: AD3.153, A3.152, T3.152, AD4.203. A4.203. Replaces Massey Ferguson 736185M1, Ford E39CP9, Allis Chalmers 72080049, Perkins 33415133 (Item #: 166885) $13.70

Valve Tappet Adjusting Nut - This Valve Tappet (Lifter) Adjusting Screw Nut is used on Perkins A3.144, A3.152, A4.192, A4.203, AD3.152, AD4.203 Gas and Diesel Engines. 3/8' inch UNF Thread. It is used with Screw 32151116 sold separately. It replaces OEM part numbers: 353430X1, 0576052, 70251225, 353438X1 (Item #: 184396, Ref: 353430X1) $2.90

Valve Tappet Adjusting Screw - This Valve Tappet (Lifter) Adjusting Screw is used on Perkins A3.144, A3.152, A4.192, A4.203, AD3.152, AD4.203 Gas and Diesel Engines. Locking nut 353430X1 sold separately. It replaces OEM part numbers: 957E6549, 731332M1, 0720677, 72080053, 32151116, 3638112M1, 32151116 (Item #: 183828, Ref: 32151116) $14.60

No
Picture
Valve Train Kit - For AD3.152 Perkins Diesel. With engine serial number ending in D. Kit includes 3 intake valves, 3 exhaust valves, 8 valve guides, 6 valve springs, 8 valve locks. (Item #: 120224, Ref: VTK302) $66.00

Engine Pistons and Sleeves

No
Picture
Piston, Flat Head, Perkins 152 or 203 Diesel - Piston with pin, flat head. For 152 or 203 CID Perkins Diesel Engines (standard 3.6 inch bore) in TRACTORS: 203, 205, 356, 35, FE35, MF35, MF50, MF65, Super 92. (Item #: 128657, Ref: 734460M91) $34.50

Piston, Perkins 5 Ring - This is a 5 ring, 3.6 inch standard bore piston and pin for Perkins AD3.152 and AD4.203 engines. Uses 836325M91 ring set. Replaces original part numbers: AHM2188, 3639048M1, 4223940M91, 4223940V91, 731154M1, 731154V1, 734466M91, 734467M91, 743824M91, 743824V91, 780006, M03-17-05, 033 - 7635, 2130017, 31083, 31084, 4223940Z91, 71019611, 743824Z91, 82111, 82112, 82137, 82147, 9Y-4687, GL47. (Item #: 168957, Ref: 734467M91) $35.50

Piston Pin Bushing - Fits 152 CID 3 Cylinder and 203 4 Cylinder Gas or Diesel Engines. For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, 2135, MF235, 200B, 4500, MF230, 20C, 30B, MF245, 356, MF65, 300, 302, 304, 3165, MF165, 30, 40B, 50, MF255.740407M1 (Item #: 128688, Ref: 957E6207A) $2.70

Piston Sleeve, Perkins 152 and 203 Gas or Diesel - Sleeve, CAST, replacing original CAST sleeve 734175M1, flange thickness .150 inch. Fits 152 CID 3 Cylinder and 203 CID 4 Cylinder Gas or Diesel Engines 3.6 inch standard bore. For tractor models 2500, 20, 40, MF135, MF150, 35, 203, 205, FE35, MF35, MF50, 200, 2244, 2200, 2135, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, MF165, MF255, 40B, 50. (Item #: 128601, Ref: 739043M1) $22.50

No
Picture
Sleeve and Piston Kit, Perkins 152 Diesel - 152 CID 3 cylinder diesel engine 3.6 inch standard bore, up to serial number 193585 kit, with CAST sleeves, for REPLACING original style CHROME sleeves. Flange thickness .040 inch. For 203, 205, 35, FE35, MF35, MF50. (Item #: PK335D) $218.85

No
Picture
Sleeve and Piston Kit, Perkins 152 Diesel - Sleeve and Piston Kit for 152 CID 3 cylinder diesel engines, 3.6 inch standard bore, .150 inch flange thickness, injectors at angle in cylinder head, 2 piece rope type seal. For tractor models MF135, MF150, MF235 with engine serial number ending with D, 200, 2244, 2200, 2500 prior to serial number 152UA391044DL, 20 prior to serial number 152UA391044DL, 203 and 205 tractor serial number 659002115-, 2135, 40 prior to serial number 152UA391044DL, MF250 engine serial number CE22488U only. Kit includes sleeves, pistons and rings, pins and retainers. For ONE cylinder. (Item #: 167206, Ref: PK337D) $69.00

Sleeve and Piston Set, Perkins 152 Diesel - For (203, 205 tractor serial number 659002115) FE35, 35, 50, all with A3-152 Regular Injection Perkins Diesel. Injectors vertical in head with CAST sleeves with serial number 1935854 and up. Sleeve and Piston Kit includes sleeve, piston and rings, pin and retainers. Flange thickness .150 inch. (Item #: 167336, Ref: PK336D) $91.00

No
Picture
Sleeve, Perkins 152 or 203 Diesel - Sleeve, CAST, for replacing original CHROME sleeve. Flange thickness .040 inch, standard bore 3.6 inch. For 203, 205, 356, 35, FE35, MF35, MF50, MF65, Super 92. (Item #: 128654, Ref: 732638M-CST) $37.60

Engine Rings

Piston - For Massey Ferguson tractor models 30, 50, 65, 135, 140, 148, 150, 154, 154-4, 155, 158, 165, 203, 230, 231, 233, 234, 235, 240, 245, 250, 253, 254, 254-4, 255, 260, 302, 304, 340, 342, 350, 353, 353LX, 360, 550, Replaces Massey Ferguson OEM number 3638405M91, 4224523Z91, 4224523M91, Number of Rings: 4, Chamber: 59.82mm, Compression Height: 61.57mm, Crown: 90.75mm, Height: 109.24mm, Pin: 31.75mm, (Item #: 169819) $67.00

No
Picture
Piston Ring Set - Fits D4.203 and 4.203 4 Cylinder Diesel Engines. For tractor models 135 engine serial number ending in D, 135 engine serial number ending in DL, 150 engine serial number ending in D, 20, 200 engine serial number ending in D, 203, 205, 20C engine serial number ending in DS, 2135 engine serial number ending in D, 2200 engine serial number ending in D, 2244 engine serial number ending in D, 230 engine serial number ending in D, 230 engine serial number ending in DL, 235 engine serial number ending in D, 235 engine serial number ending in DL, 235 engine serial number ending in DS, 245 engine serial number ending in DS, 2500 engine serial number ending in D, 30B engine serial number ending DS, 35, 356 engine serial number 2820092>, 365 engine serial number <2939035 not ending with DL, 40, 50, 65 engine serial number <2939035 not ending with DL, 65 engine serial number 2820092>. (Item #: 120667, Ref: 836325M91) $12.60

No
Picture
Piston Ring Set, 1 Cylinder, Perkins 152 or 203 Diesel - 152 or 203 CID diesel engine standard bore 3.6 inch. Ring set, for 1 piston, used with CAST sleeves only. For 20, 200, 200B, 203, 205, 2135, 2200, 2244, 2500, 30, 300, 302, 304, 3165, 35, 356, 40, 40B, 4500, 50, FE35, MF135, MF150, MF165, MF230, MF235, MF250, MF255, MF35, MF50, MF65, Super 92. Set includes 2 at 3/32 inch, 1 at 1/8 inch, 2 at 1/4 inch. (Item #: 120667, Ref: 836325M91) $12.60

No
Picture
Piston Ring Set, Perkins 152 Diesel - 152 CID 3 cylinder diesel engine standard bore 3.6 inch. Ring set for 3 pistons, use with CHROME sleeves, can replace 3-842521M92. For 203, 205, 35, FE35, MF35, MF50, Super 92. (Item #: 128872, Ref: PRS334DC) $80.00

Exhaust System

Intake Manifold - For 3 Cylinder Perkins in models 135, 150, 20, 20C, 20D, 20F, 203, 205, 2135, 2200, 230, 235, 240, 245, 30B, 30D, 30E, 40, 50), (2500, 4500 all Forklift). Inlet Manifold. (Item #: 113704, Ref: 734864M1) $32.90

Manifold - For 203, 205, (35 with A3.152 Engine). Exhaust Manifold. Replaces 731267M1, 731267M91, 37781251 (Item #: 123091, Ref: 731267M1) $48.30

Manifold Gasket - Used on Perkins Engines with square center holes on the exhaust ports. It replaces original part numbers 4222050M1, 4222050V1, 735016M1. Priced each. (Item #: 101626, Ref: 735016M1) $1.00

Muffler - For tractor models (MF135 1964 to 1974), (MF35 1960 to 1964), 202, 203, 204, 205. With gas or diesel engines. Vertical or horizontal 3 inch inlet, 1 7/8 inch inlet inside diameter, 17 inch shell length, 14 1/2 inch outlet length, 2 inch outlet diameter, 34 inches overall, 4.25 inch shell diameter. (Item #: 102432, Ref: 181867M91) $49.60

Muffler, Vertical, Black Enamel - Comes with pipe, 2 clamps, bolts and rain cap, 1-7/8 inch inlet. For tractor models TO35 with Continental Engine. (TO20, TE20, TO30 if manifold S.60036, 181866M2 and gasket 3640488M1 are used). Also adaptable to other Massey Ferguson tractors with Continental engines and 1-7/8 inch pipe. Replaces 181867M91. (Item #: 184783, Ref: S.43643) $75.00

Muffler, Vertical, Silver Finish - Comes with pipe, 2 clamps, bolts and rain cap, 1-7/8 inch inlet. For tractor models TO35 with Continental Engine. (TO20, TE20, TO30 if manifold S.60036, 181866M2 and gasket 3640488M1 are used). Also adaptable to other Massey Ferguson tractors with Continental engines and 1-7/8 inch pipe. Replaces 181867M91. (Item #: 187422) $69.00

Vertical Muffler Pipe to Manifold Gasket - Exhaust Elbow Gasket. For tractor models TE20, TO20, TO30, TO35, 135, 150, 35, 50, 65, 230, 235, 245, 20, 202, 203, 204, 205, 20C, 2135, 30B, 30D. Also Replaces OEM number 827877M1, 180104M1, 4222475M1, 72080353. Priced each. (Item #: 101628, Ref: 3640488M1) $3.00

Fuel System / Air Intake

Adjustable Needle Assembly - 3/8 inch x 24 thread. Main Adjusting Needle. For Massey Harris tractor models: Pony, Pacer, 20, Colt, Mustang, 22, 30, 33, 44, 44 Special, 44-6, 50, 55, 81, 82, 101JR, 101SR, 102JR, 102SR, 201, 202, 203, 333, 444, 555, and 404 with one of the following Marvel carbs TSX181, TSX221, TSX245, TSX332, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX641, TSX662, TSX688, TSX689, TSX695, TSX756, TSX768, TSX769, TSX772, TSX774, TSX775, TSX777, TSX784, TSX792, TSX801, TSX811, TSX813, TSX816, TSX97. (Item #: 108463, Ref: C3NN9G504A) $26.50

Carburetor - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 65, 85, 88, 201, 203, 303 Replaces Marvel-Schebler TSX644, TSX786-1, TSX62, TSX779, TSXU838, TSXU1007. Center to center on the 2 mounting bolts is 2 11/16 inches. Made in USA, 1 year warranty.Made in USA, 1 year warranty. (Item #: 100753, Ref: 14999) $520.00

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX644, TSX786. For the following tractor models: 85, 88, 201, 202, 203, 303. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203338, Ref: 1614-CARB) $265.01

No
Picture
Carburetor, Rebuilt - This rebuilt Zenith carburetor is a replacement for 12522. For models TO20, TO30, MF16, MF81, MF82, MF140, F162, MH30, MH33, MH81, MH82, MH101JR, MH102JR, MH201, MH203, MH333, all using a Marvel number TSX34, TSX62, TSX88, TSX55, TSX94, TSX155, TSX188, TSX308, TSX312, TSX447, TSX458, TSX505, TSX506, TSX541, TSX308, TSX361, TSX44, TSX596, TSX606, TSXU828, TSXU829, TSXU831, TSXU832. Linkage is reversible. The Mounting Bolts spacing measures 2 5/16 inches center-to-center. A $50.00 core charge will be added to the price and is refundable when you send your core to us and it is verified to be a rebuildable core. You will receive instructions for returning your core for a refund if you have one available. This carburetor WILL NOT WORK IF YOUR carburetor has studs that screw into the manifold. This carburetor uses studs that attach to the carburetor and then pass through the manifold and then fasted with nuts. (Item #: 203219, Ref: 12522R) $225.01

Fuel Cap - For tractor models TO20, TE20, TO30, TO35, 1100, 1150, 135, 150, 165, 175, 203, 205. Replaces OEM 520948M91. This is a non-vented cap. (Item #: 185782, Ref: D5NN9030A) $8.80

Fuel Cap, Vented - Fuel Cap INTERNAL LOCK TANGS 2.7 inch OD, 1.78 inch overall tab length, 0.250 inch tab width. This silver cap is for models: Pony, Pacer, TE20, TO20, TO30, 35, F40, 50, 65, 85, 88, 90, 135, 150, 165, 175, 1080, 1100, 1130, 1150, 1500, 1800, 202, 203, 204, 205, 302, 304, 356, 2135, 3165. Replaces 850493M1, YTO 520948M91. Verify OEM number to ensure fit. (Item #: 184806) $9.10

Fuel Filter - Fuel filter element, cartridge type. Comes with 3 o-rings. Overall length measures 3.504, outer diameter of 2.835, and inner diameter of 1.259 on both ends. Used in filter assembly 882272M91 (Purolator) Replaces 32327, 1850450M1, 1850 450M2, 1850450M2, 500764, 894974M91, P551167 and FF5364. (Item #: 172359, Ref: 1850450M2) $6.00

Fuel Filter Assembly, Single - This is a Single Filter Assembly with Glass Bowl. Ports are 1/2 inch x 20 pitch. For tractor models (1100 serial number up to 8838067), (1130 serial number up to 88T0173), (135 serial number 9A10311 and up), (150 serial number 9A24714 and up), 165, 175, 180), (35 serial number 240398 and up), (35 Turf, 35 Utility both serial number 655000484 and up), (50 serial number 535223 and up), (65 serial number 697565 and up), (Super 90 serial number 6906208 and up), (2135 Utility and Turf serial number up to 9A10311), (300 serial number up to 29E7574), (410 serial number up to 6909990), (510 serial number 8823113 Thru 8838). (INDUSTRIAL/CONSTRUCTION: 20, 203, 205, 2200, 2500, 30, (302 serial number 119700021 and up), (304 serial number 119750021 and up), 31, 3165), 40), 50, 50A). Replaces original part numbers 1447072M91, 1876507M91, 193229M91, 193239M91, 3597838M91, 883786M91. Replacement filter for this unit is CAV7111296. (Item #: 153129, Ref: 1446017M91) $27.00

Fuel Filter Bolt Assembly - Fuel bowl bolt assembly Replaces 9918145, 9918125, 81825363 May be used in other applications, such as : Claas, Fendt, Fiat, JCB, Kioti, Landini, Land Rover, Lamborghini, Leyland, Long Tractor, Matbro, McCormick, Merlo, Mitsubishi, Nuffield, Renault, Same, Satoh, Volvo (Item #: 179323, Ref: 81825363) $15.90

Fuel Injector - For tractor models: 203, 205, 20, 2135, 302, 304, 3165, 356, MF135, MF150, MF165. Marked "UB", Perkins ref# 2645732. Replaces 734596M91. NOTE: Most tractors used different injectors at different times of production. Verify OEM numbers before ordering. (Item #: 115681, Ref: 734596M91) $58.00

Fuel Injector Banjo Bolt - This Banjo Bolt is used on Perkins Engines with CAV type Injection Systems. It replaces original part numbers 731567M1, 95315, 067 - 6312, 70251292, 71011878. Uses 2 gaskets order part #921176. (Item #: 168628, Ref: 0095315) $1.60

Fuel Injector Nozzle - For tractor models (135, 150 up to serial number 152UA220812E), (165 serial number 203UA20974D and up), (255 up to serial number 203UA126251DL), (203, 205 with injector tag UB), (2135, 2200, (2500 Forklift up to serial number 152UA220812E), (30 up to serial number 152UA126251DL), (3165 serial number 203UA20974D and up), (40 up to serial number 152UA220812E), 50, (50A except with CAV injector). Replaces BDLL150S6372. (Item #: 179483, Ref: 1853019M91) $29.50

Fuel Line - For tractor models (135 UK with AD3.152 engine serial number up to 152UA38571D), (35 A3.152 engine). 15-3/8 Inches. (Item #: 173089, Ref: 890322M92) $18.50

Fuel Pump - For 148, 203, 20B, 20C, 20E, 20F, 230, 231, 240, 245, 250, 253, 254, 254-4, 255, 30B, 30D, 30E, 30H, 350, 353, 354, 355, 360, 363, 40, 40E, 550. Fuel Pump. 4 hole mount. Replaces 1447582M91, 2641712, 2641808, 4222090M91. (Item #: 117602, Ref: 3637292M1) $22.40

Fuel Pump - This fuel pump comes with gasket and is for tractor models 135, 150, 205, 40, 203, 205, 2135 all with engine serial number 152UA46497D and up and models 154-4, 230, 235, 240, 245, 20, 20C, 30B all with engine serial number up to U635849G, with Perkins AD3.152 ENGINE. This fuel pump has two mounting holes. Also replaces 2641311, 886062M9. (Item #: 117600, Ref: 3637307M91) $19.20

Fuel Pump Repair Kit - This fuel pump repair kit services fuel pumps for the following tractor models: 35UK, 35, 50, 135, 150, 203, 205, 2135, 2200, and 2500. Replaces part numbers: 1896154M91 and 4222118M91. (Item #: 183793, Ref: E157Z9) $16.30

Fuel Pump Repair Kit - This kit repairs 3637307M91 2 bolt, 14475825M91 4 bolt, 3637292M1 4 bolt fuel lift pumps. Replace 1852113M91, 1896329M91, 1896434M91, 26410009, 26410087, 3640785M1, 4222125M91, 4222125V91, 740861M1 (Item #: 165257, Ref: S40567) $16.50

Fuel Pump with Bowl, Perkins Diesel - Fuel pump with sediment bowl assembly. For A3-152 and AD3-152 Diesel Engines, two hole mounting. Tractors: 35, 50, 135 to engine serial number 152UA46497D, 150 to engine serial number 152UA46497D; Industrials: 203 and 205 to engine serial number 152UA46497D, 2135 to engine serial number 152UA46497D. Replaces 35273, 2641406, 885363M91, 890960M91. (Item #: 115331, Ref: 3637288M91) $23.50

No
Picture
Fuel System Leak Off Pipe - For Massey Ferguson tractor models 135, 148, 150, 203, 205, 230, 240, 340, Replaces Massey Ferguson OEM number 735010M91, (Item #: 165871) $28.80

Fuel Tank - This Fuel Tank is used on 3 Cylinder Perkins Diesel and 3 Cylinder Perkins Gas Tractors. Used on 35, 135, 20, 2135, 202, 203, 204, 205. Replaces 897401M1, 897401M92, 897390M91, 897401M91, H897401M92 Uses fuel cap 1876534M1. FOR KIT WITH CAP AND SENDING UNIT USE PART NUMBER 189468M93. (Item #: 104100, Ref: 897401M1) $205.00

Injection Pump - A3.152 non-advance engines. For tractor models MF35, MF50, MH50. Industrials: MF203, MF205. Replaces CAV3230F030, 3230030, 3241F030, 3830F030, DPA3230F030, DPA3230F010, 3230F010, 3230010, 881306V91, 890981M91, 891783M91, 892561M91, 892770M91. (Item #: 117632, Ref: 881306M91) $810.00

Injector Leak Off Line Washer - Two of these are used per injector on Perkins Engines using CAV type fuel Systems. Replaces 376518X1, 921176, 067 - 7011, 159048A, 500730, 70251294, TX10361, TX50047, 380428S, 81821105. (Item #: 168625, Ref: 921176) $0.60

Injector Nozzle - For tractor models (35 up to SN# 1961449), (50 with injector tag DA, F), (65 with A4.203 engine), (Ind. 35 turf and utility up to SN# 1961449), 203, (205 with injector tag DA, F). Replaces BDLL110S6133. (Item #: 113541, Ref: 1851744M1) $25.20

Injector Pump Gasket Set - Fits CAV rotary pumps only. Replaces CAV9094713GV, CAV9094-713GV. (Item #: 178115, Ref: CAV9094-713) $37.00

Injector Pump Repair Kit - Fits CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM number CAV7135-110. (Item #: 129312, Ref: CAV7135-110) $16.00

Manifold Heater - Thermostart Intake Manifold Heater on Perkins Diesel Engines. For tractors: MF154-4, MF184-4, MF240, MF250, MF270, MF274-4, MF399, MF670, MF690, MF698, MF3070, MF3090. Replaces Perkins 2666108, Massey Ferguson 1446935M1, 3583453M2, 3583543M2, 3583543V2, 893501M91. (Item #: 118792, Ref: 3583543M2) $11.80

Gauges

Fuel Sending Unit - Fuel sending unit has 2 leads and is for tractors with Perkins Gas or Diesel Engine in models 135, (20, 40 all except serial number 9A196065-9A205691), (203 serial number 659002115 and up), (205 serial number 659101250 and up), (2135 diesel), (35 serial number 209079 and up with diesel engine). This sending unit will not work in 6 inch deep tanks. Replaces 189132M91. (Item #: 119747, Ref: 1079398M91) $64.00

No
Picture
Tachometer Cable - Tachometer Cable Assembly, 27 inches in length. For tractors: MF35 diesel to serial number 227941, MF50 diesel, MF150, MF165 diesel, MF235 diesel Orchard, MF245 diesel Orchard Industrials: 30, 31, 203, to serial number 659000971, 205 to serial number 659100580. (Item #: 121522, Ref: 506335M91) $17.80

Tachometer Drive Adapter - This Tachometer (Tractormeter) Drive Connector is used with 731208M1 Tachometer Drive Housing in Perkins 152 CID 3 Cylinder Engines and Perkins 203 4 cylinder. It Replaces Perkins 33473106. Replaces Massey: 735889M1 (Item #: 169993, Ref: 33473106) $7.30

Tachometer Drive Housing - This Tachometer is used on Perkins 152 cubic inch, three cylinder engines. Fits models 135, 150, 230, 235, 240, 245, 250, 20, 203, 205, 2135, 2200. 154-4, 20C, 2500, 254-4, 30B, 30D, MF 35, MF 40, MF 50. Uses 63676M1 seal, 731209M1 gasket and 33473106 tachometer drive adapter (each sold separately). It Replaces 37416751 and 731208M1. (Item #: 179633, Ref: 731208M1) $15.30

Tachometer Drive Housing Gasket - This Tachometer Drive Housing Gasket is used with 731208M1 Tachometer Drive Housing. It is used on Perkins 152 CID 3 cylinder engine. It replaces 731209M1, 36862511 (Item #: 178131, Ref: 731209M1) $2.30

Tachometer Drive Housing Seal - This Tachometer Drive Housing Seal is used with 731208M1 Tachometer Housing on Perkins 152 CID 3 Cylinder and 203 4 cyllinder Engines. It replaces 636762M1, 72080025, 63676M1 (Item #: 169991, Ref: 636762M1) $3.20

Tachometer Housing Kit - This Kit contains one each of: 731208M1 Tachometer Drive Housing, 63676M1 Seal, 731209M1 Gasket and 33473106 Tachometer Drive Adapter. It is used on Perkins 152 CID 3 Cylinder Engines. (Item #: 183588, Ref: B2830) $29.30

Temperature Gauge - For Massey Ferguson Construction and industrial models 20, 30, 40, 202, 203, 204, 205, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 1078125M91, 180727M91, 181512M1, 1850512M94, 881396M91, 899455M91, Replaces Allis Chalmers OEM number 70226966, Replaces Minneapolis Moline OEM number 10A21284, 10A2229, 15A9741, Replaces Oliver OEM number 100679A, Replaces White OEM number 30-3485587, 60" Capillary Tube, 2" Diameter, 5/8" -18 UNF Connector, (Item #: 108057) $21.20

Water Temperature Gauge - This temperature gauge has a 72 inch Capillary tube, 2 inch Face Diameter, Chrome Ring. 180 degree normal temperature setting, 220 degree pegs top end. 5/8 inch UNF connector. TO20, TO30, TO35, FE35, F40, MH44, 50, 333, 444, 555, MF35, 50, 65, 85, 88, Super 90, 135, 165, 175, 178; ind. 20, 30, 31, 40, 50A, 70, 80, 202 Work Bull, 2200, 3165. Replaces: 1078125M91, 1079390M91, 180727M91, 180727M93, 182652M92, 1850512M94, 881396M91, 899455M91, 108727M93, 1078125M91, 0236708, 1078125M91, 180727M91, 180727M92, 180727M93, 881369M91, 899455M91 (Item #: 104116, Ref: 180727M91) $24.90

Hitch / Drawbar

Draft Control Lever Assembly - Fits the following TRACTORS: 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 2805, 282, 283, 285, 290, 360, 362, 375, 383, 390, 670, 690, FE135 Coventry. Also fits the following INDUSTRIALS: 20, 202, 203, 204, 205, 20 (C, D, F, ), 2135, 2200, 40, 50 (C, D, E, ). (Item #: 173059, Ref: 1660324M91) $39.00

Drawbar - Used on 135, 135 UK, 150, 165 UK, 165, 175 UK, 175, 178, 35 UK, 35, 35X, 50, 65 UK, 65, 765. Will also work on 235, 240, 245, 250, 202, 203, 204, 205 but is not exactly like the original. Replaces 872149M1, 189344M1, 0011091U91, 1690718M1 (Item #: 184798, Ref: 872149M1) $140.00

Eyelet Assembly, Check Chain - This Check Chain Eyelet Assembly fits Several Ferguson, Massey Harris and Massey Ferguson Tractors. The Bolt length is 2 11/16 inches. Thread diameter is 1/2 inch. Eyelet is 1/4 inch diameter. Replaces 180856M9 (Item #: 111911, Ref: EC0N660A) $5.20

Leveling Box Assembly - With hand crank adjusts from 19 inches to 24 inches. For tractor models 135 serial number 439191>, FE35, 150, 20, 20C, 203, 205, 2200, 230, 240, 245, 30, 65, FE135 COVENTRY, 2135 TURK, (20D, 20F, 250, 30B, 30D, 30E, 40B, 40E, ALL UK MODELS), 231 URSUS, (202, 204, ALL WORK BULL). Adjustment is 19 inches to 24.5 inches center to center hole. (Item #: 115661, Ref: 1660373M92) $67.00

No
Picture
Leveling box fork - Leveling box fork 13.5 inch long, .75 inch thread, .75 pin hole (Item #: 182652, Ref: 897659M1) $34.20

Leveling Box Gear Housing - For tractor models 135, 148, 150, 165, 175, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 25, 250, 255, 265, 275, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 35, 40, 40B, 40E, 50, 65, 765, F40, FE135, FE35, TE20, TEA20, TO35. (Item #: 182821, Ref: 193181M1) $20.98

Response Control Assembly - Fits the following TRACTORS: 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 2805, 282, 283, 285, 290, 360, 362, 375, 383, 390, 670, 690, FE135 Coventry. Also fits the following INDUSTRIALS: 20, 202, 203, 204, 205, 20 (C, D, F, ), 2135, 2200, 40, 50 (C, D, E, ). (Item #: 172613, Ref: 1661918M91) $26.80

Rocker Link - For tractor models 135, 150, 165, 20, 203, 205, 20C, 2135, 2200, 230, 245, 30, 302, 304, 3165, 40, 50, F40, FE35. (Item #: 165755, Ref: 180973M2) $22.60

Swinging Drawbar Kit - Fits 135, 150, 235, 240, 245, 250, 202, 203, 204, 205 Industrial Tractors. (Item #: 116973, Ref: S.61494) $245.00

Hydraulic System

Adapter Plate Bushing, Set of 4 - Set of 4 Rubber Bushing for front mount hydraulic adapter plates. For tractors: MF35, MF50, MF65, MF135, MF150, MF165, MF175, MF235 orchard, MF245 orchard industrials: 20, 20C, 30, 30B, 30D, 35, 40, 40B, 40E, 50, 50A, 50C, 50D, 202, 203, 204, 205, 2135, 2200, 3165. Used in adapter plates 704812M93 and 708639M91. For 1134, 1143, 1144, 1153, 1163, 1164, 1183, 24, 260, 33, 34, 43, 44, 44-0, 44S, 540, 54C, 62, 63, 63C, 64, 82, 83 NOTE: Order 1 for a set of 4. (Item #: 173266, Ref: 1400022M91) $22.60

Control Lever Roller - Used on Mark I and Mark II Massey Ferguson hydraulic pumps, this roller fits some of the following models: 20, 20C, 202, 203, 205, 2135, 2200, 30, 302, 304, 31, 3165, 40, FE135, 135, 135 UK, 150, 165, 175, 180, 230, 245 (Item #: 179419, Ref: 898202M1) $5.20

Cover Cap - For 1080, 1085, 130, 135, 150, 165, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 40, 50, 65, 85, MH50, TO35. Hydraulic Cover Cap, 2 bolt. Replaces 180908M1, 520933M91, 182373M91, 190809M1 (Item #: 167498, Ref: 180908M1) $17.80

Cross Shaft - 37 splines on ends, 42 splines in center, 2 inch bushing diameter used with 180910M1 lift arm and 181018M1 bushing. For the following tractors: 130, 135, 150, 165, 202, 203, 204, 205, 2135, INDUSTRIAL 25, 302, 304, 35, 50, 65, F40, MH50, TO35. (Item #: 160155, Ref: 184359M1) $72.00

Dipstick - Hydraulic oil level indicator measures overall length of 7 3/8 inches and 5 inches from the stop down. It is used on tractors models: FE35, Super 90, TE20, TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 203, 204, 230, 231, 235, 245, 253, 255, 265, 275, 360, 362, 383, 65, 85, 88, 202, 205, 302, 2135, 2500, 35, MF 50, MH 50. Replaces 180366M1, 193400M1, 514184M1. (Item #: 111829, Ref: 193400M1) $10.90

Draft Control Boot - Draft Spring Rubber Boot. Fits Multiple Massey Ferguson Models. Replaces 1660439M1, 887654M1, 887654M2. (Item #: 169245, Ref: 887654M1) $3.10

Dual Hydraulic Remote Valve Kit - This Dual Hydraulic Remote Valve Kit includes levers, hoses and Female couplers. Use with Pioneer 8010-4 series male plugs for the couplers (not included). Replaces Massey Ferguson part number 677421. (Item #: 168678, Ref: 677421) $419.00

Hydraulic Cylinder Stud, 3 Inch - Hydraulic Cylinder Stud is used with 190859M1 Cylinder. It is 9/16 inches in diameter (9/16 UNF Thread). This is used for replacement of 1/2 inch studs when re-drilling lift cover to accommodate the 9/16 studs. This is a 3 Inch Stud. Verify length before ordering. Replaces 1667579M1, 1667580M1, 1667580M2, 899258M1 (Item #: 173649, Ref: 899258M1) $6.90

Hydraulic Cylinder Stud, 4 Inch - Hydraulic Cylinder Stud is used with 190859M1 Cylinder. It is 9/16 inches in diameter (9/16 UNF Thread). This is used for replacement of 1/2 inch studs when re-drilling lift cover to accommodate the 9/16 studs. This is a 4 Inch Stud. Verify length before ordering. Replaces 1667579M2, 1667579M1, 908934M1, 899257M1. (Item #: 173644, Ref: 899257M1) $5.70

Hydraulic Cylinder Stud Nut - Hydraulic Stud Nut is used with 899258M1 and 899257M1 Studs. It is 9/16 UNF Thread (Din 934). Replaces 368749X1 (Item #: 173194, Ref: 368749X1) $0.60

Hydraulic Diverter Valve - Hydraulic Diverter Valve made for 1080, 1085, 130, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 31, 3165, 35, 360, 362, 375, 383, 390, 392S, 393, 398, 40, 0B, 40E, 50, 50C, 50D, 50E, 65, 85, MH50, TO35 ALL WITH 3/8 inch NPT ports. Verify the diagonal bolt pattern of the part in the picture as this only fits in place of existing cover plate (180908M1 or 182373M91). Hydraulic supply continues available for lift arms, or two additional ports are available along with a return to tank. Only one supply can be selected at a time with hydraulics isolated in other positions. (Item #: 161564, Ref: S.60032) $119.00

Hydraulic Pump - For tractor models (TO35 serial number 179304 and up), 35, (50 serial number 516837 and up), 65, 203, 205, 202, 203, 204, 231, 253, 302, 304. Valve Pushes Rearward. Replaces 183005M91, 184473M93, 184773M93. 10 spline w/1 3/8 inch diameter shaft. Horizontal safety valve. This pump is 7 3/4 inches wide, 5 1/2 inches high, 12 1/2 inches long. Shaft Length 6 1/2 inches. ***NOTE: various pumps were used on these models - verify configuration in picture. (Item #: 155591, Ref: 184473M93) $300.00

Hydraulic Pump Filter O-ring - This O-Ring is used with 185555M1 cap and Bowl Set. (Item #: 178156, Ref: 831907M1) $0.50

Hydraulic Pump Support Peg - This hydraulic pump support peg has a step (shoulder) on the pin. The diameter steps from 9/16 inches to 7/16 inches. If you need a straight pin peg, use part number 180905M1. If you need a gasket order part number 180904M1, sold separately. Replaces 898643M1. (Item #: 173297, Ref: 898643M1) $11.20

Hydraulic Pump Support Pin Gasket - This hydraulic pump support pin gasket is used with 180905M1 and 898643M1 hydraulic pump support pins. It replaces 180904M2, 180904M1. (Item #: 167222, Ref: 180904M1) $0.70

Lift Arm - For tractor models 135, 175, 235, 230, 245, 202, 204, 203, 205, 302, 304, 2135, 3165, 2200, 30, 20, 40, 40B, 40C. Hydraulic Lift Arm, right or left. 51 Spline. Used with 897567M3 Cross Shaft REPLACES : 885445M91 Check Side Before Ordering Because Arm Is Used As RH On Some Models And RH and LH On Others (A) (Item #: 160183, Ref: 885444M91) $66.00

Lift Arm - Left Hand Lift Arm. For tractor models 135, 150, 165, 175, 20, 203, 205, 235, 245, 255, 265, 275, 285, 30, 30B, 30D, 3165, 40, 40B. (Item #: 160184, Ref: 885446M1) $144.00

Lift Arm - For tractor models TE20, TEA20, TO20, TO30, FE35, F40, TO35, 130, 135, 202, 203, 204, 205, 2135, 25, 302, 304, 35, 65. Lift arm for both right hand/left hand side. Lift arm has a 1.80 inch inside diameter and 37 spline hole. (Item #: 114032, Ref: 180910M1) $54.00

Lift Clevis Bushing, LH - Left hand slotted bushing for rocker on draft control clevis. For 135, 150, 165, 165UK, 175, 175UK, 185UK, 180, 20, 200, 202, 203, 204, 205, 20C, 20D, 2135, 2200, 230, 235, 240, 240S, 245, 265S, 271, 281, 285S, 30, 302, 304, 31, 3165, 35, 40, 50, 65, FE35, MH50, TO35. (Item #: 153601, Ref: 180974M1) $6.60

Lift Clevis Bushing RH - Right hand slotted bushing for rocker on draft control clevis. For 135, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 230, 245, 30, 302, 304, 31, 3165, 35, 40, 50, 65, F40, FE35, MH50, TO35. Replaces 181982M1, 180974M1 (Item #: 153600, Ref: 181982M1) $6.50

Lift Cover - This lift cover is used on many Massey Ferguson Tractors. It uses a 3 1/8 inch Piston. It replaces those marked: 1861320M1, 1870951M2, 884615M1, 1870955M2, 1693551M1. Replaces 1693547M1, 1693547M91, 1693551M91, 3761903M91, 884612M92, 190861M2, 1870950M91. (Item #: 173139, Ref: 3761903M91) $582.00

Lift Cover Gasket - For tractor models 135, 135 UK, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 202, 203, 204, 205, 20C, 20E, 20F, 2135, 2200, (230, 245, 265, 275 serial number 9A349239), 235, 2500, 255, 256, 282, 30, 302, 304, 30B, 30H, 31, 3165, 35, 40, 40B, 4500, 50, 50A, 50C, 50F, 60, 65, 6500, 6500H, F40, FE35, TO35. (Item #: 112052, Ref: 886549M2) $1.70

Lift Cylinder - Cylinder, hydraulic lift for 3-1/8 inch diameter piston. For tractors: MF135, MF150, MF165, MF230, MF235, MF240, MF245, MF250, MF282 Industrials: 20, 20C, 20D, 30, 30E, 40 202, 203, 204, 205, 302, 304, 2135, 3165. Use with 1665737M91 piston with rings. Replaces 897560M1, 897560M2 (Item #: 163456, Ref: 897560M3) $137.00

Lift Cylinder - For tractor models 202, 203, 204, 205, (35, 50, 65, FE35, all early), TO35. Hydraulic Rockshaft Cylinder has 3 inch diameter, is 7.937 inches long. Used with 184443M91 piston and (3) 184447M1 rings. NOTE: BOLT PATTERN IS 3 3/4" X 3 3/8" WITH 9/16" NF HOLES. THE HOLE SIZES WERE CHANGED BY MASSEY FERGUSON. THE COVER MUST BE REDRILLED AND STUDS CHANGED. REQUIRES (2) 899257M1 9/16"X3" STUD (2) 899258M1 9/16"X4" STUD (4) 368749X1 NUTS - We do not stock these items but they should be available locally. (Item #: 115763, Ref: 184442M1) $93.00

Lift Cylinder - 3 inch Lift Cylinder for tractor models 135, 150, 165 with Pressure Control, 202, 203, 204, 205, 2135, 302, 304 (Late 35, 50, 65, FE35). This cylinder originally came with 1/2 inch studs and then later models used 9/16 inch studs. This part comes made for 1/2 in studs. Verify which you have. This will replace the 9/16 diameter studs if you purchase studs and bushings. We do not supply the studs or bushings. (Item #: 115418, Ref: 190859M1) $104.00

Lift Cylinder Piston, 3 inch - Piston is 3 inch (piston ring is available separately, see part number 184447M1). For tractor models FE35, TO35 (serial number 179304 and above), 202, 203, 204, 205, 35, 35 Ind/Turf/Util, 50, 65, Early 135, 150, 165, 2135, 202, 204. (Item #: 112025, Ref: 184443M91) $34.90

Lift Cylinder Piston with Rings - For tractor models 135, 150, 165, 230, 235, 240, 245, 250, 255, 265, 282, Ind: 20, 20C, 20D, 30, 30E, 40, 202, 203, 204, 205, 302, 304, 2135, 3165. Hydraulic Lift Cylinder Piston with Rings. 3 1/8 inch diameter. Replaces 897561M91. (Item #: 184692, Ref: 1665737M91) $47.90

Lift Piston Rod - For tractor models 135, 150, 165, 202, 203, 204, 205, 2135, 302, 304, 35, 50, 65, FE135, FE35. Lift piston rod is 7 3/4 inches. (Item #: 170854, Ref: 191211M1) $18.10

Lift Pump Adapter Plate - For 35, 150, 65, 135, 50, 235, 245, IND: 20, 20C, 30, 30B, 30D, 35, 40, 50, 202, 203, 204, 205, 2135, 2200. Front Mounted Hydraulic Pump Adapter Plate. 5 1/4 inch diameter with 3 bushings, mounting holes 3 3/8 inch on center, 3/4 inch left hand threaded center hole. (Item #: 118288, Ref: 704812M93) $64.00

Lift Pump Cap Kit Bowl - For 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 31, 3165, 35, 40, 50, 65, 85, 88, Super 90, FE135, FE35. Hydraulic Pump Cap Kit Bowl. Replaces 185839M1, 185555M1 (Item #: 178614, Ref: 185555M1) $13.50

Lift Pump Coupling - 10 spline coupling for models: 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 31, 3165, 35, 40, 50, 65, 85, 88, Super 90, F40, FE135, FE35, MH50, TO35. (Item #: 173680, Ref: 180926M1_) $59.00

Lift Pump Draft Control Spring Retainer Nut - For 1080, 1085, 135, 150, 165, 175, 180, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 30B, 31, 165, 35, 360, 375, 383, 390T, 392, 393, 40, 40E, 50, 50D, 50E, 65, 670, 690, 698, F40, FE35, MH50, TO35. Replaces 180979M1, 180979M2 (Item #: 170928, Ref: 180979M2) $9.80

Lift Pump Drive Shaft - Drive shaft with coupler attached. For front mounted hydraulic pump drive, 11-3/8 inch overall length, adapter end 3/4 inch left hand threads, coupler end 3/4 inch round bore with 3/16 inch keyway. For tractors: MF135 Orchard Industrials: 20, 35 utility, 202 serial number 30315. (Item #: 168962, Ref: 704997M92) $144.00

Lift Pump Filter - Filter element is top mount. 2-7/16 inch outside diameter, 1-29/32 inch inside diameter and 4 inches long. For tractors: MF35, MF50, MF65, MF85, MF88, MF90, MF1080 industrials: 202, 203, 204, 205, 302, 304, 2135, 2200, 3165. Also the following tractors with pumps having 10-spline camshaft: MF135, MF150, MF165, MF175, MF180 Industrials: 20, 30, 31, 40, 302, 304. For MF1100, MF1105, MF1130. Replaces 521451M1, 185551M92 (Item #: 172545, Ref: 521451M1) $10.60

Lift Pump Follower - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 3165, 35, 360, 375, 383, 390, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 173508, Ref: 180933M1) $10.60

Lift Pump Needle Bearing - Bearing for recess in rear of camshaft for hydraulic lift pump. For tractors: TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, MF375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085 industrials: 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 35, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 3165. (Item #: 184765, Ref: 1000251M1) $6.80

Lift Pump Overhaul Kit - For tractor models (135, 150, 165, 175, 178, 180, 20, 202, 203, 204, 205, 2200, 30, 302, 304, 3165, 40) FE135 Coventry, 2135 Turf Utility Narrow. Hydraulic Pump Overhaul Kit contains (2) A897491M1, (2) A-1860038M1, A-180924M2, A-180925M2, (4) A-897493M1, A-1810684M92, A-1810680M92, (2) A-1810678M91. 4 holes, 3/8 inch mounting bolt holes with .438 inch oil hole. (Item #: 173095, Ref: 556602) $223.00

Lift Pump Plug - For tractor models 135, 135UK, 150, 165, 165UK, 175, 175UK, 178, 180, 20, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 3165, 35, 40, 50, 65, TO35. Hudraulic Pump Plug. Used with 897491M1 Valve Chamber Assembly. (Item #: 180701, Ref: 181999M1) $6.20

Lift Pump Valve Assembly. - For tractor models 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 3165, (40, 50 ALL INDUSTRIAL MODELS). Replaces 1660209M92. (Item #: 179514, Ref: 1862486M96) $45.65

Lift Ram 2.50 Inch - Used with 897567M3 cross shaft, 2.50 inch on both ends, 54 splines. For tractor models FE135, 135, 150, 165, 20, 20C, 20D, 20E, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 265, 30, 30E, 302, 304, 3165, 40, 40E. (Item #: 167068, Ref: 886405M1) $81.00

Overload Stop - For tractor models 1080, 1085, 135, 135UK, 150, 165, 165UK, 175, 175UK, 178UK, 180, 20, 202, 203, 204, 205, 20, 2200, 230, 235, 240, 245, 250, 253, 262, 263, 265, 270, 275, 275UK, 282, 283UK, 185, 290, 290UK, 292, 298, 30, 302, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 65, 670, 690, 698, TO35. Overload Stop is round plate with single hole. (Item #: 172681, Ref: 180981M1) $5.70

Piston Rod, Hydraulic - 8.250 inches long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E, 690, 698, 699, FE135, 2135. (Item #: 173462, Ref: 886410M1) $30.00

Selector Valve - Converts MF hydraulic to external service (valve has 3/8 inch BSP thread in pressure ports) This 3 way selecter valve is designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. Provides a positive change over from tractor hyd. to external service. Does away with need to fix the tractor lift arm in the lower position when external service is in use. The 3 point linkage of the tractor can be free for use while the external service remains connected simply by operating the valve. Services lift arms plus three external ports w/ return going back to rear end. Ports can only be used one at a time. Designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. This is a replacement for the earlier VFD1103 (Item #: 161563, Ref: VFD1104) $158.00

Stand Pipe, Hydraulic Oil Pressure - 12.500 inches long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 245, 253, 255, 285, 30, 302, 304, 31, 3165, 360, 362, 375, 383, 390, 390T, 3925, 40, FE135 Coventry. (Item #: 124227, Ref: 898229M1) $20.50

Lights

Headlight, 12 Volt - This is a serviceable 12 Volt headlight. It is 5-3/4 inch diameter, sealed beam bulb. Will work for left or right side. This light is not like the original. Will replace 505088M91, but is not the same. There is no visor. (Item #: 183739, Ref: S.66419) $59.00

Headlight, 6 Volt, RH or LH - Light is NOT an original replacement. For: TO20, TE20, TO30, TO35. Painted light grey. Will also function on MF20, Super 90, 135, 150, 165, 175, 202, 203, 204, 2135, 302, 304, 35, 65, 85, 88, 95, 97, 98 Replaces 186141M91, 186142M91, 510436M91, 510437M91. (Item #: 113349, Ref: 2N13005C) $58.00

Headlight Washer - Used with light part number 164089AS. For the following tractors: TO20, TE20, TO30, TO35, 35, 40, 50, 65, 85, 135, TEA20-85, 150, 165, 175, 180, 770, 88, 90, Super 90, 97, 1080, 1085, 202, 1100, 1105, 203, 1130, 204, 235, 245, 255, 265, 275, 285, 30, 31 (Item #: 154899, Ref: 504781M1) $5.30

Light Switch - Used on Diesel models: 203 Industrial, 205 Industrial, SUPER 90, 35, Massey Harris 50, 65. Replaces 189526M92 (Item #: 173333, Ref: 189526M92) $17.20

Sealed Beam Bulb - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Early fender mount for tractors: TO35, MH50, MF50, MF65 Inner or upper fender for tractors: MF150, 165, 175, 180, 1100, 1130. Fits various other models. (L4411). Replaces 1002803M91, 1509347M1, 1751347M91, 1752866M91, 181856M91, 189544M91. (Item #: 111241, Ref: 373662R91) $10.30

Taillight Mounting Bracket - Exact of original. Manufactured in USA. (goes between tail light and fender bracket). Fits: TE20, TO20, TO30, TO35, 135, 202, 203, 204, 205, 65, 85, 90. Ferguson: 40, 50, 35. Replaces: 1750671M91, 1751824M91, 1751825M1. (Item #: 125325, Ref: 8N13423) $10.00

Oil System

Dipstick - Dipstick for oil is 7 inches in length. Models using Perkins A3-152, AD3-152, A4-203 and AD4-203 engines. Also replaces 31786412. For tractor models DT5500, 135, 148, 150, 154-4, 1545, 158, 20, 202, 203, 205, 20C, 20D, 2135, 230, 231, 235, 240, 245, 250, 253, 254-4, 255, 30, 300, 302, 304, 30B, 30D, 3165, 35, 350, 356, 360, 40, 40B, 4500, 4830FC, 50, 50A, 550, 5830, 5830FC, 5860, 5870, 6030FC, 6070, 65, 765. (Item #: 121771, Ref: 731117M91) $6.90

Oil Fill Cap, Perkins Engines - This oil fill cap comes complete with chain. For models 35, 50, 35 Utility, 135, 150, 230, 235, 240, 20, 203, 205, 2135, 245, 250, 65, 65 UK, 165, 255, 302, 304, 30, 40, 3165, 390T, 393, 398, 3065, 3070, 175UK, 283, 290, 383, 390, 394, 690, 3060, 3074, 6150. Replaces original part numbers 2487854, 248854, 734962M1, 734962M91, 734962M93. YTO 734962M91 (Item #: 186882, Ref: 734962M91) $6.40

Oil Filler Plug - Rubber measures 1 7/16 inches in diameter. For tractor models with Perkins Engines: 1080, 1085, 135, 150, 165, 175, 180, 20, 203, 205, 20C, 2135, 2200, 230, 235, 245, 2500, 255, 265, 275, 285, 298, 30, 30B, 30D, 31, 3165, 40, 4500, 50, 50A, 50C, 50D, 6500, 698, 70. Replaces 2487863. (Item #: 125397, Ref: 897105M1) $15.50

Oil Filter Cartridge Type - For Perkins engines in models 135, 150, 165, 203, 205, 2135, 302, 304, 3165, 35, 50, 65, FE35. Replaces 1851766M1, 1883258M91, 1883258M92, 837595M91, 837595V91, 894975M91. This filter is (4 1/2 inches in length, 2 3/4 inch outside diameter, 3/4 inch inside diameter). (Item #: 126048, Ref: 837595M91) $7.30

Oil Filter Head Gasket - This Oil Filter Head Gasket is used on Massey Ferguson tractors with Perkins Engines. Replaces 4222003M1, 0490514, 490514, 731124M1 (Item #: 166425, Ref: 731124M1) $1.30

Oil Filter Head to Block Bolt - This Bold is used on Perkins 144, 152 and 203 cubic inch engines. It is used to bolt on new spin on filter conversion heads. It measures 3/8 x 3 1/2 inch UNF thread. Replaces original part numbers 354505, 354505X1, 0096443, 10096443. (Replaces 354511X1, 4-1/4 inch bolts on original filter heads, to 3-1/2 inch bolts for spin on filter head.) (Item #: 178047, Ref: 354505X1) $2.30

Oil Pressure Switch - Oil pressure switch located directly behind the oil pressure gauge, uses blade type wire terminal. For Perkins diesel engines in tractors: MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF275, MF285 SN# 9A349239 and up, MF1080, MF1085, MF1100, MF1105, MF1130, MF1135, MF1150, MF11 For 203, 205, 20C, 20, 2135, 302, 304, 30B, 30D, 30, 3165, 31, 40B, 40, 50A, 50C, 50D, 50, MF1080, MF1085, MF1100, MF1105, MF1130, MF1135, MF1150, MF1155, MF135, MF1505, MF150, MF165, MF175, MF1805, MF180, MF230, MF235, MF245, MF255, MF265, MF275, MF285 (Item #: 121161, Ref: 509682M91) $14.10

Oil Pump - Oil Pump Assembly for Perkins Engines in tractors using AG3-152 Gas and A3-152 and AD3-152 Diesel Engines. Replaces 41314078, 736513M91. For tractor models 135, 150, 154-4, 1545, 165, 20, 200, 202, 203, 205, 20C, 20D, 20F, 2135, 220, 2200, 2244, 230, 235, 240, 245, 250, 2500, 254-4, 30B, 30D, 30E, 30H, 35, 35 Utility, 40, 4500, 4830FC, 50, 5500, 5830, 5830FC, 6030FC, 65. (Item #: 113912, Ref: 3638632M91) $66.00

Oil Pump Idler Gear - Replaces 41115025. For tractor models 135, 150, 154-4, 20, 200, 202, 203, 205, 20C, 20D, 20F, 2135, 2244, 230, 235, 240, 245, 250, 2500, 30B, 30D, 30E, 30H, 35, 40, 4500, 4830FC, 50, 5830, 6030FC, 8530FC. Also Replaces 736513M91, 41314078. (Item #: 170489, Ref: 733551M92) $38.60

PTO / Driveline

Bearing - Bearing, outer, for PTO Output Shaft (inside diameter 1.771 inch X outside diameter 2.952 inch x .629 inch thick) For tractors: TO30, TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175 late production, MF235 For tractors with dry brakes: MF255, MF265 to serial number 9A349239, MF275 to serial number 9A349239. For tractors using snap rings on bearing. (Item #: 172368, Ref: 195498M1) $31.90

PTO Gear - For tractor models 135, 150, 155, 158, 175, 180, 20, 202, 203, 240, 2200, 30, 31, 3165, 550, FE135 COVENTRY, 165 STANDARD/MULTI-POWER serial number <-130773, 2135, TURF UTILITY NARROW. This PTO gear is a constant mesh gear with 53 spur teeth and 15 splines. Replaces 899329M1 and 1867820M1. (Item #: 153626, Ref: 1867820M1) $64.98

PTO seal - Used as a transmission PTO main drive pinion shaft seal, with dual clutch 6-speed transmission. The width of the seal measures 0.350 inch, 1.750 inches I.D., and an O.D. of 2.254 inches. Replaces 195503M1, 195503V1. For the following tractors: 35, 50, 65, 20, 20C, 30, 150, 165, 175, 180, 202, 230, 203, 204, 235, 245 (Item #: 152783, Ref: 195503M1) $4.30

PTO Shaft, 540 RPM - For F135, F35, F40, MH50, TO35, 135, 150, 165, 175, 180, 202, 203, 204, 205, 2135, 2200, 302, 304, 3165, 35, 50, 65 all with Live PTO, (20, 30, 31, 40, all Ind For Live PTO). PTO Shaft 540 RPM, 1 3/8 inch x 22.75 inches long, 10 drive splines, 1 snap ring groove. Replaces: 181204M92, 181204M91, 181204V92, 1812204M92, 1867084M91, M05-39-02. (Item #: 168169, Ref: 181204M92) $62.00

Rear Drive Shaft PTO - For FE135, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 30, 30B, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 370, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 690, 698. Rear Drive Shaft PTO. 8.75 inches long, 10/18 splines. Replaces 886548M1. (Item #: 886366M91) $178.34

Seats

Seat Bracket - This seat bracket is used on the bucket style seat part number 181313M93 and is for tractor models: TEA20, TE20, TO20, TO30, TO35, 35, 50, 65, 85, 88, 98, 135, 150, 230, 235, 240, 245, 250, 265, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 35 Turf and Utility, 40, 40B, 40E, 50, 50A, 50C, 202, 203, 204, 205, 2135, 2200, 3165. Replaces original part number 181316M92. (Item #: 155779, Ref: 181316M92) $83.00

Seat Cushion - New Black Canvas Seat Fits Massey Ferguson 35, 20, 202, 203, 204, 205, 30, 40, F40, TE20, TO20, TO30, TO35, 130, 135, 150, 185, 230, 235, 250, 283, 50, 65, 85, 88, 95 Models Interchangeable with 1690046M91-1, 1753008M1 (Item #: 183821, Ref: 1753008M1) $64.00

Seat Hinge and Pins - This is the hinge and pin found on bracket part number 181316M92. It is used for attaching bucket seat part number 181313M93. It includes 181322M1 hinge link, 181321M1 pin (3/8 inch x 6-7/8 inch) and 181320M1 pin (3/8 inch x 7-5/16 inch). (Item #: 182977, Ref: 181322M1) $45.20

Sheet Metal / Body Parts

Fender, Clamshell without Bracket - Fender Panel (Fender Skins) comes as pictured without bracket, dished type, made exactly like the original. Price is for one fender. For tractors without roll-over protection structure. For tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65 exc. Orchard, MF85 standard, MF135 except Vine and Orchard, MF150, MF165, MF175, MF230, MF235. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 100026, Ref: 526904M1) $99.00

Fender - Less Toolbox - With ORIGINAL STYLE BRACKET. Fender comes with toolbox hole (NO TOOLBOX), must fit New/Used toolbox into fender, check fit before painting. For tractor models TO35, 35, Massey Harris 50, 50, 65, 135, 35 Ind., 2135, 202, 203, 204, 205. Replaces 180736M92. Add additional $150.00 to shipping due to weight. (Item #: 178722, Ref: S.43774) $315.00

Fender With Bracket - With NON-ORIGINAL TYPE BRACKET. Rear fender, dished type with mounting bracket, mounting bracket spot welded on. For tractors without roll-over protection structure. No tool box hole. For tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65 except Orchard, MF150, MF165, MF175, MF230, MF235 except Vine and Orchard, MF245, MF255 with 16 inch rims, MF265 standard, MF275 standard, MF285 standard Industrials: 20 except Turf, 20C except Turf, 30 except Turf, 30B, 35 Utility, 40, 50, 50A, 202, 203, 204, 205, 2135 Utility, 3165 Utility, also these models with 4-post R.O.P.S., 30D, 40B, 50C. For MF1100, MF1105, MF1130. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104069, Ref: 8N16312) $101.00

Fender with Toolbox - Fender comes with toolbox, NOT assembled, must fit toolbox into fender, check fit before painting. For tractor models TO35, 35, Massey Harris 50, 50, 65, 135, 35 Ind., 2135, 202, 203, 204, 205. Replaces 180736M92. Additional $145.00 shipping due to weight. If you want 2nd matching fender without tool box hole, order S.66428. (Item #: 116087, Ref: S.43775) $324.00

Hood, Dash and Grill Rubber Bumper - 1/2 inch outside diameter X 7/16 inches tall. For tractor models 20C, 20D, 20F, 30B, 30E, 30H, 40B, 40E, 50A, 50C, 50D, 50E, Super 90, TE20, TO20, TO30, 30, 31, 60, 65, 85, 88, 135, 150, 165, 175, 180, 202, 203, 204, 205, 230, 231, 235, 240, 245, 250, 255, 265, 302, 303, 404, 1080, 1100, 1130, 1150, 2135, 2200, 2640, 2675, 2705, 2745, 2775, 2805, 3165, 3505, 3525, 3545, 4500, 6500, MF 20, MF 25, MF 35, F40, MF (Ag and Ind): 40, 50, TO35. Replaces: 194768M1. (Item #: 163112, Ref: 180673M1) $0.90

Hood Latch Assembly - For tractor models MH50, MF50, 65, 85, 88, Super 90, 135, IND 20, 50, 50A, 70, 202, 203, 204, 205, 2135. Replaces 184779M92. (Item #: 114536, Ref: 194119M91) $17.60

Metal Toolbox, In-Fender Style - For tractor models: T035, MF35, 50, 135, Industrial 35, Utility 2135. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Also replaces S.60010. (Item #: 116980, Ref: 180737M1) $57.00

Steering

Power Steering Cylinder Left - Comes with 2 ball joint ends. 12.5 inches long, 5/8 inch diameter rod. 5.640 inch stroke. For 135 Orchard, 240, 250 and Industrials 20, 35 Utility, 202, 203, 204, 205, 2135. Replaces 1662946M92, 1674491M92, 1673086M91, 3401240M91, 3401 240M91, 001403U91, 1885715M91. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. Uses 3314663M91 repair kit. (Item #: 118573, Ref: 3401240M91) $121.00

Power Steering Cylinder Right - Comes with 2 ball joint ends. 12.5 inches long, 5/8 inch diameter rod. 5.640 inch stroke. For 135 Orchard, 240, 250 and Industrials 20, 35 Utility, 202, 203, 204, 205, 2135. Replaces 0011404U91, 001404U91, 1662947M92, 1673087M91, 1674492M92, 3401241M91. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. Uses 3314663M91. (Item #: 118574, Ref: 3401241M91) $133.00

Power Steering Plate - Mounts under steering wheel nut, 2-1/2 inch outside diameter, 5/8 inch center hole with keyway, anodized red aluminum. For tractor models 35, 65, 85, 88, Super 90, Industrials 202, 203, 204, 205, 303, 404. (Item #: 126606, Ref: 183174M1) $20.20

Power Steering Pump - Straight cut gear, 13 teeth, includes drive gear, reservoir and adjustable relief valve preset at 1500 PSI. BARNES style pump, hose fittings on gear side of pump. Does not come with mounting gasket. We do not have a gasket available. For tractors using Perkins 3 Cylinder Gas or Diesel Engines. Models: 35, 50, 135, 150, M230, MF235, MF245, MF250, 135, 230, 231, 240, 245, 250, 2500, 253, 35, 4500, 50; Industrials: 20, 20C, 30B, 30D, 30E, 40, 203, 205, 2135, 2200; Forklifts: 2500, 4500. Replaces Massey Ferguson 193208M91, 518369M92, 527904M91, 773126M92, 527904M93, 527904M92, 773126V92. Replaces J.S. Barnes: 1000013, GC-5060-A-GA-7, GC-5060-A-GA-5, GC-5060-A-GA-2 NOTE: This pump is 4.00 inches deep. If you need a shallower pump order 527904M91 (Item #: 119845, Ref: 773126M92) $157.00

Power Steering Pump with Reservoir - For tractor models MH50, TO35, 135, 202, 203, 204, 2135, 35, 40, 50, 65, (150 AG GAS (CONT ENG)GAS/DSL). Replaces part number 182493M92, 191277M91, 191423M92, 191426M91, 191486M91. Pump comes with internal relief valve. (Item #: 112571, Ref: 544443M91) $490.00

Spindle Bushing - 1.680 inch outside diameter, 1.50 inch inside diameter, 1.50 inches long. For tractor models 1080, 1085, 135, 165, 168, 175, 180, 185, 188, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 360, 362, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 85, 88, 90. (Item #: 102482, Ref: 183086M1) $5.30

No
Picture
Spindle, Left or Right - Spindle has a 11.187 inch vertical shaft that has a 1.5 inch diameter. For 202 after serial number 306677, 203 after serial number 659000300, 304 serial number after 242537, 205 after serial number 659100150. Spindle is reversible. The wheel bearing kit used for this spindle is part number WBKMF2. (Item #: 105016, Ref: 189751M92) $188.00

Spindle, Left or Right Side - The measurements on this Spindle are: A - 11.187 inches, B - 1.500 inches, C - 1.796 inches, D - 1.250 inches. Uses WBKMF3 Wheel Bearing Kit, 183086M1 Bushings, 196167M1 Thrust Washer and 387930S36 Spindle Nut (all sold separately). Fits both the left and right side on Massey Ferguson: 202 below serial number 306677, 203 below serial number 65900300, 204 below serial number 342537, 205 below serial number 659100150, 2135 below serial number 646992326. (Item #: 105017, Ref: 183016M92) $154.00

Steering Box Assembly - Steering Box Assembly, for manual steering tractors. Length 17 inches. uses 1691798M1 steering wheel. Used on 231, 240, 250, 20D, 30E, 40E (Will also work on; 35, 50, 20, 135, 2135, 235, 202, 203, 204, 205 by ordering two 827690M1 'cup and lock ring sets' and 1691798M1 Steering Wheel.) Replaces 1673663M1, 1673663M91. Does not come with Mounting Gasket or Shifter Cups. (Item #: 161571, Ref: 1673663M1) $862.72

Steering Column Grommet - New Steering Column Grommet fits Massey Ferguson 35, 202, 203, 204 and 205 (serial number 204181 and up). Grommet measures 3.660 inches length, 3.085 inches width and 1.480 inches hole inside diameter. Early tractors use smaller grommet. (Item #: 126707, Ref: 186627M1) $17.40

Steering Cylinder Ball Joint, Female - Rod end ball joint, with internal threads. For Tisco universal power steering cylinder 192749M92. For tractor models 20, 202, 203, 204, 205, 2135, 35, MF135. 1/2 - 20 NF Thread. Also Replaces OEM 1754629M1 (Item #: 172886, Ref: 192749FT) $20.30

Steering Shaft and Nut Assembly - For Power Steering on TO35, 35, 135 (>serial number 641016186), 2135 (prior to serial number 646001410). Shaft measures 21 3/4 inches overall length. Replaces 1751666M1, 1751666M91. (Item #: 182854, Ref: 1751666M91) $218.77

Steering Shaft Assembly - For TO35, 35, 135, 202, 203, 204, 205, 2135 with Manual Steering. 21 3/8 inches Long. (Item #: 165143, Ref: 180538M91) $189.00

Steering Shaft Repair Kit - Repair kit for Steering Shaft. For Tractors with Power Steering. Services shafts where upper oil seal has worn a groove into shaft causing oil to leak from upper housing. (Item #: 173253, Ref: SRK632AA) $48.60

Steering Shaft Seal - 49/64 inch X 1 3/8 inch X 25/64 inch. For tractor models 135, 20, 202, 203, 204, 205, 2135, 230, 235, 245, 35, TO35. Replaces 1876951M1. (Item #: 172323, Ref: 1751702M1) $8.80

Steering Wheel - For TO20, TO30, TO35, 35, 135, F40, 50, and 65. 17-3/4 inch diameter, 3/4 inch hub with 3/16 inch keyway. Covered Metal Spokes. (41486S) (Item #: 122474, Ref: 180576M1) $25.50

Steering Wheel Nut, Chrome - Chrome, Domed. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40, 20, 202, 203, 204, 205, 50E, Pony, Super 90, 135, 135 UK, 270, 283, 290, 298, 35. Repalces OEM 195592M1. Head uses a 1 1/8 inch wrench. (Item #: 150988, Ref: 351103CC) $8.10

Steering Wheel - Original Type - For tractor models TE20, TEA20, TO20, TO30, TO35, 20, 35, 135, 50, 65, 2135. 17-3/4 inch diameter, 3/4 inch hub with 11/16 inch keyway. Metal Spokes. (Item #: 101418, Ref: 180576M1-OE) $27.70

Tie Rod - For Massey Ferguson tractor models 20, 35, 135, 202, 203, 204, 205, 302, 304, 2135, Compatible with Massey Ferguson Construction and industrial models 202, Replaces Massey Ferguson OEM number 1754629M91, Diameter: 0.531", Length: 1.156", (Item #: 166505) $23.40

Tie Rod End, Front - Drag link end assembly, front. 3.75 inch to center of post, .812 inch-16 right hand thread. For drag links with adjustable end. For tractors: F40, MH50, MF50, MF65, MF135 Orchard, Deluxe and Special, MF150, MF165, MF175 industrials: 20, 35 utility, 202, 203, 204, 205, 356 tractors. Replaces: 182534M1, 182534V91, 847451M91, 884701M92 (Item #: 102503, Ref: 182534M91) $13.70

Wheels

Front Lug Nut - Used on Ferguson and Massey Ferguson models 1100, 1130, 135, 148, 150, 165, 168, 175, 178, 180, 202 Indust/Const, 203 Indust/Const, 204 Indust/Const, 205, 20D Indust/Const, 20F Indust/Const, 2135 Indust/Const, 250, 253, 255, 263, 265S, 270, 271, 275, 281, 282, 283, 290, 30E Indust/Const, 30H Indust/Const, 3165 Indust/Const, 340, 342, 35, 350 Indust/Const, 352, 355, 360, 362, 365, 372, 375, 383, 390, 390T, 393, 396, 399, 40E Indust/Const, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50 Loader, 565 Combine, 575 Skid Steer Loader, 590, 65, 670, 675, 690, 765, 85, 90, F40, TE20, TEA20, TO20, TO30, TO35, the nut has 1/2 inch - 20 thread and is 1-1/16 hex head. Replaces 195489M1, 195490M1, S9512A. (Item #: 112060, Ref: 195490M1) $2.30

Front Rim - 4.50" x 16", 6 bolt, 6" circle, 4-5/8" pilot, 5.50 or 6.00 x tire. For tractor models 135, 150, 165, 165 UK, 175, 180, 202, 203, 204, 205, 20C, 2135, 230, 231, 235, 240, 240P, 240S, 245, 250, 253, 263, 265, 270, 275, 290, 35, 360, 375, 390, 390T, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4265, 4325, 4335, 4345, 4355, 50, 65, 85, 88, Super 90, TE20, TEA20, TO20, TO30, TO35. Replaces 885741M3, 1077283M91, 535448M91, 506020M91, 195638M91.1883335M3 Additional $15 shipping due to weight. (Item #: 103756, Ref: 8N1015D) $70.00

Front Rim, 4.50 x 16 - Front wheel, with weight holes. 4.50 inch x 16 inch, 6-bolt, 6 inch bolt circle with 4.62 inch pilot for 5.50 inch or 6.00 inch x 16 inch tires. 2500 pound capacity. For tractor models 135, 150, 165, 165 UK, 175, 180, 202, 203, 204, 205, 20C, 2135, 230, 231, 235, 240, 240P, 240S, 245, 250, 253, 263, 265, 270, 275, 290, 35, 360, 375, 390, 390T, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4265, 4325, 4335, 4345, 4355, 50, 65, 85, 88, Super 90, TE20, TEA20, TO20, TO30, TO35. Replaces 885741M3, 1077283M91, 506020M91, 195638M91, 535448M91, R2055, and 1883335M3. Additional $15 shipping due to weight. (Item #: 103756, Ref: 8N1015D) $70.00

Hub Cap Without Zerk Fitting - Threaded. 2.00 inch outside thread diameter, 24 right hand threads. For tractor models 135, 150, 202, 203, 204, 205, 2135, 35, 40, 65, FE35, TE20, TO20, TO30, TO35. Replaces 1884289M1 (Item #: 183735, Ref: 2N1139B) $6.30

Hub Cap WITH Zerk Fitting - Threaded. For tractor models 135, 150, 202, 203, 204, 205, 2135, 35, 40, 65, FE35, TE20, TO20, TO30, TO35. 2.00 inch outside thread diameter, 24 right hand threads. Has Zerk fitting center of cap. 2.00 inch with 24 RH Thread. (Item #: 100661, Ref: 1884289M1WZ) $6.30

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Verify measurements before ordering. Replaces: 180876M1, 353427X1. (Item #: 184824, Ref: 350719KIT) $22.00

Wheel Bearing Kit - This front wheel bearing kit Includes 1 each: LM48548 (Cone), LM48510 (Cup), LM11949 (Cone), LM11910 (Cup), 18265 (Seal). For tractor models 1080, 1085, 135, 150, 165, 175, 180, 185, 202, 203, 204, 205, 20C, 230, 235, 245, 255, 265, 275, 285. Replaces 835965M91. (Item #: 102487, Ref: WBKMF2) $20.10

No
Picture
Wheel Bearing Kit - Kit contains 1 each of the following 25590 bearing, 25520 bearing cup, LM67048 bearing, LM67010 bearing cup, 22322 seal (lip type). For tractor models 1080, 165, 175, 180, 185, (202 serial number up to 306677), (203 serial number 65900300), (204 serial number up to 342537), (205 up to serial number 659100150), (2135 up to serial number 646992326), 255, 265, 275, 285, 40. (Item #: 102488, Ref: WBKMF3) $36.10

Wheel Hub - For tractor models 175, 202, 203, 204, 205, 220, 30, 31, 3165, 40. Uses WBKMF3 wheel bearing kit, not included. (Item #: 160890, Ref: 519276M91) $194.00

Wheel Stud - Front wheel stud. Measures 1.59 inches overall length and .930 threaded length. Threads are 1/2 UNF. These are #5 Steel per OEM specification and may come with a silver steel finish or a gold zinc finish. Fits TE20, TEA20, TO20, TO30, TO35, FE35, F40, 1100, 1130, 130, 135, 150, 165, 175, 180, 202, 203, 204, 2135, 250, 253, 255, 263, 270, 275, 281, 283, 290, 30, 3165, 340, 35, 350, 355, 360, 365, 375, 390, 4225, 4255, 4265, 50, 575, 590, 65, 675, 690, 85. (Item #: 108606, Ref: 181328M1) $1.62

Wheel Stud - Wheel stud measuring 1/2 x 1 1/2 UNF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863, 16216A. For the following tractors: 135, 148, 165, 168, 175, 178, 20B, 20D, 20E, 2135, 230, 231, 240, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30D, 30E, 340, 342, 35, 350, 352, 355, 360, 375, 375E, 383, 390, 390E, 393, 398, 40, 550, 565, 575, 590, 65, 670, 675, 690, 765, MHMustang, MHPacer, MHPony, MH101JR, MH101SR, MH102JR, MH102SR, MH20, MH22, MH30, MH33, MH44, MH44 Special, MH44-6, MH444, MH81, MH82 (Item #: 111560, Ref: 512581M1) $1.60

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Ferguson Script Decal - 12 inches long, vinyl, blue and white. (Item #: 183045, Ref: R0735) $13.80

Ferguson Script Decal - 19 inches long, vinyl, green and chrome. (Item #: 178283, Ref: R0736) $25.10

Ferguson Script Decal - 26 inches long, vinyl, blue white. (Item #: 183046, Ref: R0737) $35.60

Massey Harris Trademark Decal - Red with yellow letters, 1-1/2 inches on vinyl. (Item #: 183092, Ref: R5190) $3.80

Massey Harris Trademark Decal - Yellow with red letters, 1-1/2 inches on vinyl. (Item #: 183072, Ref: R5191) $3.80

Massey Harris Trademark Decal - Red with yellow letters, 6 inches on vinyl. (Item #: 183101, Ref: R5192) $12.10

Massey Harris Trademark Decal - Yellow with red letters, 3/4 inch on vinyl. (Item #: 183066, Ref: R5236) $2.50

Massey Harris Trademark Decal - Red with yellow letters, 3/4 inch on vinyl. (Item #: 183098, Ref: R5237) $2.50

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $98.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Pulley - Pulley, 3-1/8 inch diameter, 5/8 inch shaft bore, 2 grooves for 1/2 inch wide V-belt. (Item #: 179552, Ref: AP3158) $68.00

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Generator Cutout - Generator cutout for Autolite, 6-volt. For most MH models to 1951. (Item #: 105283, Ref: CB4014) $19.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Can fit several applications please verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter Drive - Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models. (Item #: 111105, Ref: 1036519M91) $29.80

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

Starter Solenoid - Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt. (Item #: 105672, Ref: 1115510) $30.00

$Massey Ferguson 203 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $106.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $134.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $104.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $166.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $149.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Massey Ferguson 203 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Massey Ferguson 203 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Massey Ferguson 203 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Massey Ferguson 203 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Massey Ferguson 203 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Massey Ferguson 203 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.30

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $16.60

Fuel Line Sleeve, Pack of 10 - 7/16 inch outside diameter x 1/4 inch inside diameter x 1/4 inches wide. Replaces 33811113, 3637441M91, 376525X1, 3638466M91 (Item #: 158879, Ref: 376525X1) $4.60

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

$Massey Ferguson 203 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Throttle Linkage - Universal. Adjustable length ranges from 6 3/8 to 6 5/8. Rod can be cut and either re-bent or re-threaded if a shorter length is required. (Item #: 173108, Ref: 1876343M92) $14.30

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Bracket Stabilizer - Bracket, used with telescoping stabilizer 539881M2TSK. (Item #: 178304, Ref: 514992M2) $44.90

Drawbar - Drawbar, category I, 7/8 inch pins. 11 holes, 26 inch bar length. (Item #: 103174, Ref: 180485M1) $44.30

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

No
Picture
Level Box Assembly - Leveling Box Assembly, standard right hand, category I, 20-1/2" closed, 26" open. Contains fork, shaft, pinion (185220M1-10-1/2"), housing, gear, bearing, handle and hardware. Replaces 677061, 1884760M94. Services all catergory I standard models. (Item #: 110256, Ref: HLBMF61) $73.00

Top Link Assembly, OEM Style - Category 1-1, 17-1/4 inch length of center tube. Verify size before ordering. Replaces 1870075M9. (Item #: 182641, Ref: 184134M91) $86.02

Top Link Assembly, OEM Style - Category 1-1, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 184078M91, 1869954M91. (Item #: 182642, Ref: 1690177M91) $67.00

Top Link Assembly, OEM Style - Category 1-1, 21-1/2 inch length of center tube. Verify size before ordering. (Item #: 182643, Ref: 184361M91) $85.44

Top Link Assembly, OEM Style - Category 1-2, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 3597172M91, 894376M1, 894376M91. (Item #: 182645, Ref: 194376M91) $85.00

Top Link Assembly, OEM Style - Category 1-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 894377M91, 894 377M91, 894377M1 (Item #: 170303, Ref: 894377M1) $92.00

Top Link Assembly, OEM Style - Category 2-2, 18-3/4 inch Length of center tube. (Item #: 182650, Ref: 893438M91) $81.00

Top Link Assembly, OEM Style - Category 2-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 3147681M91, 893439M91. (Item #: 184676, Ref: 1887285M91) $60.00

Top Link, Cat I and Cat II - Top link, 16 inch body combination Category II tractor and Category I implement ends, Adjust 19-1/2 inches to 29-1/2 inches overall. May or may NOT come painted red. (Item #: 112122, Ref: JSA1200R) $22.98

Top Link, Cat II - Top link, 24 inch body, 1 inch Category II ball joints. Adjusts 29 inches to 41 inches. Color varies depending on availability. (Item #: 182649, Ref: JSA2024R) $98.07

Top Link, Cat II, Red - Top link, 20 inch body, 1 inch category II ball joints. Adjusts 25 inches to 37 inches. (Item #: 184552, Ref: 30108E91) $70.00

Top Link, Cat I, Red - Top link, 24 inch body, 3/4 inch category I ball joints. Adjusts 29 inches to 39 inches overall. Painted red. (Item #: 182651, Ref: JSA1024R) $70.00

Top Link, Hydraulic - Category I (3/4 inch), 18.5" inches to 26.0 inches length, 2.00 inch cylinder bore, 9/16 inch UNF port size. (Item #: 183653, Ref: B8106) $261.00

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Clamp, Double Break-Away, Hydraulic - For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp. (Item #: 112480, Ref: S42-4) $29.95

Coupler Flange - Optional drive flange for L601-9; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch spacing. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b. (Item #: 108772, Ref: L36-6) $117.34

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $13.50

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $20.10

Hydraulic Selector, isolator assembly - For tractors without individual external hydraulic systems. Three position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms and the rear position will feed power to a 4 way control valve for two way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 I/O ports 3/8 inch NPT. (Item #: 185644, Ref: TS300) $144.00

Hydraulic Valve Kit, External, Single Spool - Converts tractor for operation of cylinders on pull type implements, front loaders, hydraulic motors, or other optional hydraulics. Single spool, double acting control valve mounts conveniently on flat or shell fenders. Selector/isolator allows operation of single or double acting cylinders. Mounting hardware and instructions included. Kit contains single spool, double acting control valve, isolator valve, valve couplers, clamp hoses, adaptors, hardware and instructions. For tractor models TO35 and later where 182373M1 lift cover plate is accessible. (Item #: 178324, Ref: TS3200M) $868.00

Hydraulic Valve Manifold - This 3 Spool Valve allows operator to use auxiliary hydraulics at the same time without valve switching. Some tractors may need slight modification on seat. Includes 2 elbows. Models from 1960 and later years. (Item #: 173361, Ref: 19833A92) $1159.01

LBP Coupler Center - This LBP Coupler Center Member measures (A) 3-5/8 inch diameter (B) four 5/16 inch holes, 2-1/4 inch spacing. Replaces 1753729M91. (Item #: 178931, Ref: 192169) $74.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

No
Picture
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Valve - Valve for TS3200M. Single spool, 4-way, 3-position, spring loaded to neutral. No relief valve, no power beyond option. In and out ports 3/4 inch, work ports 1/2 inch NPT. (Item #: 183771, Ref: TS200BA) $311.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $97.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.70

Lights

Headlight Kit, 12 Volt, LH, Chrome Ring - Kit contains 6" steel body, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 186851, Ref: S.43374) $104.78

Headlight Kit, 12 Volt, RH, Chrome Ring - Headlight Kit contains 6" steel, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 187205, Ref: S.22341) $109.00

Headlight Kit, 6 Volt, LH - Headlight assembly includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (LH), Primered. Assembly required. (Item #: S.43370) $98.00

Headlight Kit, 6 Volt, RH - Includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (RH), Primered. Assembly required. (Item #: S.22342) $101.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Air Cond Comp - New Air conditioning compressor, replacement for Frigidaire A-6 compressor. Includes 5.58" dia. clutch and dust cover, high pressure relief valve. With 12V coil at 10 Oclock, SAE thread. Less superheat switch (comes plugged with non-functional heat switch. For tractors that have air conditioning systems using the Frigidaire A-6 compressor already. (Item #: 109093, Ref: 1904014M92) $400.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $67.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.90

No
Picture
Paint, Dark Gray, 1 Gallon - This Dark Gray was used on Ferguson Implements from 1939 through 1948. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords (1939-1947). Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108333, Ref: TP2888GAL) $55.00

No
Picture
Paint, French Silver Mist Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108364, Ref: TP750GAL) $70.00

No
Picture
Paint, French Silver Mist Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108363, Ref: TP750QT) $25.50

No
Picture
Paint, French Silver Mist Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108362, Ref: TP750SP) $10.90

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184671, Ref: TP540GAL) $150.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP540QT) $61.00

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108367, Ref: TP235GAL) $81.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108366, Ref: TP235QT) $32.90

No
Picture
Paint, Light Gray, Spray Can - TO35 Sheet Metal 1954-56 and implements after 1954. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108365, Ref: TP235SP) $12.40

No
Picture
Paint, MF Red, 1 Gallon - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102660, Ref: TP300GAL) $57.00

No
Picture
Paint, MF Red, 1 Quart - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102659, Ref: TP300QT) $21.70

No
Picture
Paint, MF Red, Spray Can - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102658, Ref: TP300SP) $7.50

No
Picture
Paint, MH Red, 1 Gallon - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108370, Ref: TP340GAL) $54.00

No
Picture
Paint, MH Red, 1 Quart - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108369, Ref: TP340QT) $20.40

No
Picture
Paint, MH Red, Spray Can - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108368, Ref: TP340SP) $9.80

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Straw Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108373, Ref: TP345GAL) $132.00

No
Picture
Paint, Straw Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP345QT) $61.00

No
Picture
Paint, StrawYellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108371, Ref: TP345SP) $10.40

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Coupler Repair Kit - Coupler repair kit, services all Hub City over-running couplers. Contains keys, roll pin, set screw, springs, spacer, and retaining ring. (Item #: 182663, Ref: CRK600) $93.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Quick Release Pin - PTO quick release pin fits MOST American yokes. Replaces: 1810351M91, QDK1, QDK1M. (Item #: 112246, Ref: 1810351M91) $1.98

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

No
Picture
Seat Cover (Red and Yellow) - Tie-on for 19 inch wide pan seat. For Tractors that have a Red and Yellow color scheme. (Item #: XYFR30RY) $31.50

Tie-On Seat Cover - Grey, 19 inches wide. Deluxe with 2 inches of foam. This fits a PAN seat. (Item #: 178997, Ref: R2600) $52.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Bumper - Bumper assembly, mounting arms NOT included. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178311, Ref: BU10211R) $134.00

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $408.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $12.30

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 183027M91, 509893M91 (Item #: 103768, Ref: FW60166) $94.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $70.00

Rim 10X28 - This rim measures 10 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. May come Painted primer or aluminum or off white color. Replaces 180863M91. (Item #: 103719, Ref: NCA1020B) $130.00

Rim 11X28 with 6 Loop Clamps - This rim is 11 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. Painted aluminum color. Shipped via truck Add $25.00 extra shipping per rim due to weight. Replaces 535450M91. (Item #: 104209, Ref: C5NN1050E) $160.00

Rim, 12X24 - Rim, 12 x 24 demountable rim for 13 x 24 or 14 x 24 tires. Add $52.95 extra shipping due to weight. 6 Loops, these measure 20 1/4 inches center-to-center across from one another. Uses special S.04352 bolt and nut kit. (Item #: 108579, Ref: 535454M91) $154.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $103.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $63.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00