Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Crawlers, Dozers, Loaders & Backhoes Discussion Forum

350 JD Reversor

Welcome Guest, Log in or Register
Author 
Wingnut

02-27-2004 10:28:33




Report to Moderator

Putting the reversor back together took pics as i took it apart, but not good enough.Need to know in what manner the retainer for the center oil inlet tube goes in,looks like in the book the flat side goes in first,but want to make damn sure as i wasnt paying attention when i took it apart.Not sure if beveled side goes in first or flat side.Also do we use gasket sealer on the cover gasket and the valve body gasket or no sealer at all.Thanks Wing

[Log in to Reply]   [No Email]
jdemaris

02-27-2004 19:20:16




Report to Moderator
 Re: 350 JD Reversor in reply to Wingnut, 02-27-2004 10:28:33  
The bevel in the retainer is a seat for an o-ring as I recall and faces towards the reverser case, i.e. flat side out, and o-ring in-between the beveled side of the retainer and the case.



[Log in to Reply]  [No Email]
Wingnut

02-27-2004 10:31:20




Report to Moderator
 Re: 350 JD Reversor in reply to Wingnut, 02-27-2004 10:28:33  
Picture as is. www.safewerks.com/retainer1.jpg



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy