Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

Eimco Dozer

Welcome Guest, Log in or Register
Author 
John

08-17-2001 19:49:50




Report to Moderator

I need info on finding parts for an Eimco dozer. Does anyone know anyone who has any parts for these? The model is a 103mc. It was built in 1966 for the military. Any help would be appreciated. A bearing that sits on the outside of the rear sprocket went out and ruined a main shaft and dust cover. I am looking for manuals and a used parts source.

Thanks much,
John




[Log in to Reply]   [No Email]
Ron Orozco

06-05-2006 18:58:52




Report to Moderator
 Re: Eimco Dozer in reply to John, 08-17-2001 19:49:50  
I found an old message from you regarding an EIMCO 103MC Dozer. I too have one. We tore into the left rear driver and are now looking for parts. Specifically the bearing, races and seals for the main worm gear. The yoke/housing is good but there was not enough left of the bearings to even get a number.

Can you please help?

Do you still have a repair manual? Does it specify the bearing pre-load spec?

Any idea where I can get parts for this machine?

Thanks in advance for your consideration.

Ron

[Log in to Reply]  [No Email]
Steve Leigh

01-11-2006 06:29:23




Report to Moderator
 Re: Eimco Dozer in reply to John, 08-17-2001 19:49:50  
Looking for idler wheel assembly Emico 103 Dozer and miscellanous parts.



[Log in to Reply]  [No Email]
Ron Orozco

06-05-2006 18:57:43




Report to Moderator
 Re: Eimco Dozer in reply to Steve Leigh, 01-11-2006 06:29:23  
I found a message from you regarding an EIMCO 103MC Dozer. I too have one. We tore into the left rear driver and are now looking for parts. Specifically the bearing, races and seals for the main worm gear. The yoke/housing is good but there was not enough left of the bearings to even get a number.

Can you please help?

Do you have a repair manual? Does it specify the bearing pre-load spec?

Any idea where I can get parts for this machine?

Thanks in advance for your consideration.

Ron

[Log in to Reply]  [No Email]
Roger

06-29-2002 20:36:19




Report to Moderator
 Re: Eimco Dozer in reply to John, 08-17-2001 19:49:50  
There is a 1966 Eimco for sale by the State of North Carolina. Look at>Link
Unknown>Link whether it is running or not. I think the bid opening is in early July.



[Log in to Reply]  [No Email]
Kent Boyer

12-17-2001 14:07:02




Report to Moderator
 Re: Eimco Dozer in reply to John, 08-17-2001 19:49:50  
I may be able to find some parts for you. I also run a 103mc (m64) eimco dozer. I have a parts book and shop manual. If you don't mind me asking, what was the shiping date on your machine. The shipping date is on the plate that is riveted on the left side of the dozer by the battery box. Please write me back if you are interested.



[Log in to Reply]  [No Email]
Ron Orozco

06-05-2006 18:55:25




Report to Moderator
 Re: Re: Eimco Dozer in reply to Kent Boyer, 12-17-2001 14:07:02  
I found an old message from you regarding an EIMCO 103MC Dozer. I too have one. We tore into the left rear driver and are now looking for parts. Specifically the bearing, races and seals for the main worm gear. The yoke/housing is good but there was not enough left of the bearings to even get a number.

Can you please help?

Do you still have a repair manual? Does it specify the bearing pre-load spec?

Any idea where I can get parts for this machine?

Thanks in advance for your consideration.

Ron

[Log in to Reply]  [No Email]
Nick Taylor

05-01-2003 13:24:12




Report to Moderator
 Re: Re: Eimco Dozer in reply to Kent Boyer, 12-17-2001 14:07:02  
I am interested in getting some parts for my Eimco Dozer or possibly parting mine out. Where could I obtain a manual or a copy of yours. I would pay for the copying fee and postage.



[Log in to Reply]  [No Email]
rich

04-20-2003 16:31:53




Report to Moderator
 Re: Re: Eimco Dozer in reply to Kent Boyer, 12-17-2001 14:07:02  
I came across your reply about an Eimco 103. I am looking at an Eimco 123 loader, but I canit find any info out on it. Can you help, or have any suggestions?



[Log in to Reply]  [No Email]
D Neubert

08-18-2001 04:34:35




Report to Moderator
 Re: Eimco Dozer in reply to John, 08-17-2001 19:49:50  
Iron Peddlers has one for parts. 704-289-8591



[Log in to Reply]  [No Email]
Dorsey

05-14-2006 07:37:50




Report to Moderator
 Re: Re: Eimco Dozer in reply to D Neubert, 08-18-2001 04:34:35  
I have a Eimco track dozer that I am selling. Got it with a land deal. It has a 454 cummings engine in it...it looks, runs and operates great.
If anyone is interested, please let me know. Also have a Insley excavator with same engine, runs great, except for a hydraulic leak on the bucket cylinder.



[Log in to Reply]  [No Email]
McClure Farm

06-13-2007 07:54:19




Report to Moderator
 Re: Re: Eimco Dozer in reply to Dorsey, 05-14-2006 07:37:50  
Need radiator for Emico Dozer. 864-225-4055

Anderson, SC 29626

Thanks Jim McClure



[Log in to Reply]  [No Email]
barry seman

03-04-2007 16:34:35




Report to Moderator
 Re: Re: Eimco Dozer in reply to Dorsey, 05-14-2006 07:37:50  
does anyone know if eimco made a dozer where the operator sat in front of the machine? If this isn't the dozer maufacturer, do you know who made such a dozer?



[Log in to Reply]  [No Email]
Davis In SC

03-04-2007 17:12:54




Report to Moderator
 Re: Re: Eimco Dozer in reply to barry seman, 03-04-2007 16:34:35  
I have a Eimco watch fob, that has a dozer where the operator is sitting up front, but I have never seen an actual machine. I think those were small dozers, made to operate in underground coal mines..



[Log in to Reply]  [No Email]
Ron Orozco

06-05-2006 19:01:31




Report to Moderator
 Re: Re: Eimco Dozer in reply to Dorsey, 05-14-2006 07:37:50  
I found a message from you regarding an EIMCO 103MC Dozer. I too have one. We tore into the left rear driver and are now looking for parts. Specifically the bearing, races and seals for the main worm gear. The yoke/housing is good but there was not enough left of the bearings to even get a number.

Still interested in selling yours? Where are you located?

Know of any good parts suppliers for this machine?

Thanks in advance.

Ron

[Log in to Reply]  [No Email]
campo

01-03-2007 18:25:14




Report to Moderator
 Re: change of subject in reply to Ron Orozco, 06-05-2006 19:01:31  
Hi would anyone know about a 1966 galion Grader, with 4 cyl cummins motor, particularly what the fly wheel may look like.
Any info would be very helpful.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy