Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Crawlers, Dozers, Loaders & Backhoes Discussion Forum

CHinNY have this part??? hydraulic hose,

Welcome Guest, Log in or Register
Author 
maplehillfrm

02-19-2008 08:12:28




Report to Moderator

hey do you happen to have 7/8" [ID] low pressure hydraulic return line that goes in between two pipe fittings on a T340A? This is a cloth covered rubber hose with metal strands in the hose, it goes in between 2 pipes that are attached 1 to the sump in the back end, and 1 to the hydro valve body,held on with clamps,,

I have been all over looking for it and have no luck,,[they say they are discontinued]-- then I remebered I got parts from you last year,, and a light went off,, I have apar number from book--313 715 R1,,,

I was also looking for the hydraulic control bracket #309 574 R1,, I found 1 but it was 50 bucks +.. do you have a used one?? thansk pat

[Log in to Reply]   [No Email]
Tramway Guy

02-22-2008 05:47:31




Report to Moderator
 Re: CHinNY have this part??? hydraulic hose, in reply to maplehillfrm, 02-19-2008 08:12:28  
The reason it was discontinued is probably because it is readily available from other sources, and they don't sell enough of it to make it pay anymore.



[Log in to Reply]  [No Email]
maplehillfrm

02-22-2008 06:22:52




Report to Moderator
 Re: CHinNY have this part??? hydraulic hose, in reply to Tramway Guy, 02-22-2008 05:47:31  
It wasnt /isnt just discontinued thru international, ALL the auto stores, hydraulic supplies, dealers, have NO listing ,, we looked thru Gates and others,, there is no availability,,,, so if it is readily available anywhere you let me know , thanks pat



[Log in to Reply]  [No Email]
Charlie

02-22-2008 14:31:44




Report to Moderator
 Re: CHinNY have this part??? hydraulic hose, in reply to maplehillfrm, 02-22-2008 06:22:52  
As far as I can see, all you need is something like this: >Link
You>Link should be able to have a piece cut to length from a repair shop or supplier like NAPA. It comes in 7/8 ID.



[Log in to Reply]  [No Email]
Charlie

02-21-2008 17:23:50




Report to Moderator
 Re: CHinNY have this part??? hydraulic hose, in reply to maplehillfrm, 02-19-2008 08:12:28  
You should be able to use any hose of the right ID and qualified for use with oil, since this is just a low pressure return line. I would imagine you could get a piece cut to the right length at NAPA or a similar place. Alternatively, you could remove the pipe pieces and do the whole run in high pressure hose, but you do need the same minimum ID. NAPA could put on the right fittings. The bracket could be cut from a piece of angle iron or bent up plate. My machine is not here, but someone would be glad to give you the measurements, I'm sure.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy