Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

Instant Expert

Welcome Guest, Log in or Register
Author 
Andy Martin IE

02-18-2003 20:07:54




Report to Moderator

May I humbly suggest when you "instantly" know the proper response to a question on this board, you put "IE" after your name so others will know you are an "instant expert" and are not guessing or supposing what the questioner would like to know.

Of course, there are still times when experiences and true knowledge differ, but everyone expects that.

By using the "IE" designation you can let others know you are sure of your response.

What do you think?

Of course I know the "instant expert" title was invented by someone to ridicule responders he did not agree with, but rather than knuckling under, I think we can use it to good advantage. I covet the title.

[Log in to Reply]   [No Email]
Garry

02-20-2003 08:01:34




Report to Moderator
 Re: Instant Expert in reply to Andy Martin IE, 02-18-2003 20:07:54  
Well, a lot of the time the response goes off on a tangent and doesn't answer the question. I enjoy reading them anyway, but generally there is someone that gives a real answer to the question. I have also noticed that incorrect answers will usually be corrected by other experts. So to get to your question, I would be cautious of someone claimiing to be an expert.



[Log in to Reply]  [No Email]
IE... in error

02-19-2003 19:38:08




Report to Moderator
 Re: Instant Expert in reply to Andy Martin IE, 02-18-2003 20:07:54  
That's what my information usually is when I post! scottAR



[Log in to Reply]  [No Email]
Bill B

02-19-2003 16:38:36




Report to Moderator
 Re: Instant Expert in reply to Andy Martin IE, 02-18-2003 20:07:54  
This forum, like most others, is filled with folks who have a common interest in something, in this case farmalls. Probably none of us are experts, but most of us have some experience, or knowledge that we are willing to share for what it is worth. Just like asking at the gas station, or the barber shop, you take your chances on the advise as to how accurate it is. I think most everyone offers what they honestly think is correct, and if it is not, then they are mistaken, which nobody is immune to. My father used to say that free advice is worth what you pay for it. I have recieved help here and on other forums, and am free with my comments when I think I know what I am talking about. When I am wrong, someone ususally points that out, which I appreciate. There are many ways to do any one task, and some folks have found creative ways to repair these old tractors, and that information is great. I think to label someone an instant expert, or for someone to use that term on themselves is a bit much.

[Log in to Reply]  [No Email]
Dave Olson Illinois

02-19-2003 15:45:33




Report to Moderator
 Re: Instant Expert in reply to Andy Martin IE, 02-18-2003 20:07:54  
I share with you a couple definitions of experts that I have heard over the years.

A has been that spouts off a lot!!

If you carry a briefcase and are 100 miles or more from home, you must be an expert if you are here at our plant! :-)

Dave Olson



[Log in to Reply]  [No Email]
CNKS

02-19-2003 12:09:07




Report to Moderator
 Re: Instant Expert in reply to Andy Martin IE, 02-18-2003 20:07:54  
I hope you are joking -- no one knows everything. Example -- Needed to remove clutch in my Super H. You said to remove 3 of the bolts that attach it to flywheel and put them in the 3 pretapped holes. That is the "textbook" procedure. Straight H's up to the last few hundred have these holes. Super H clutch does not have these holes. Clutch came out easily anyway. you gave the best answer based on your knowledge, but apparently you have not removed a clutch from a Super H. No harm done, but be careful with your recommendations for something you have not done.

[Log in to Reply]  [No Email]
Andy Martin

02-19-2003 19:54:40




Report to Moderator
 Re: Re: Instant Expert in reply to CNKS, 02-19-2003 12:09:07  
Yes, it was intended in humor.

But a lot of guys took it very seriously.

Interesting responses.

We all learn something from every trip here.



[Log in to Reply]  [No Email]
CNKS

02-20-2003 07:37:43




Report to Moderator
 Re: Re: Re: Instant Expert in reply to Andy Martin, 02-19-2003 19:54:40  
Good! I like the answers from you and many others who have actually done these repairs.



[Log in to Reply]  [No Email]
Turbo1206

02-19-2003 10:57:39




Report to Moderator
 Re: Instant Expert in reply to Andy Martin IE, 02-18-2003 20:07:54  
I think everyone knows going in that folkes here are offering opinions based on varying degrees of experience. The info is valuable but cannot be considered written in stone. Not many on here have the attitude that they have all the answers, just offering up some free help. Which I appreciate and have used. Just my two cents worth.



[Log in to Reply]  [No Email]
Dave_Id IE

02-19-2003 07:14:41




Report to Moderator
 Re: Instant Expert in reply to Andy Martin IE, 02-18-2003 20:07:54  
Sounds like a crock to me



[Log in to Reply]  [No Email]
Hugh MacKay

02-19-2003 02:34:45




Report to Moderator
 Re: Instant Expert in reply to Andy Martin IE, 02-18-2003 20:07:54  
Andy: I don't believe your suggestion will resolve much. Everyone's opinion on expert may differ as widely as their opinions them selves.



[Log in to Reply]  [No Email]
Gary

02-19-2003 19:47:45




Report to Moderator
 Re: Re: Instant Expert in reply to Hugh MacKay, 02-19-2003 02:34:45  
I make my living as a tractor mechanic for myself. I know a good bit about a lot of stuff, BUT, every evening, I check the posts and learn something new, sometimes from people who are not mechanics. At the same time, when I offer advice, most times I look it up in the book before I make a response. In that way, I refresh my own mind. Once in awhile, I give information that comes automatically to me, but, I mix up the location on older and newer stuff. For instance, yesterday, I gave tune up specs for a340. They requested info on timing the tractor. I didn't look it up, I told them how to time an A< Super A, etc. I went back later with the timing info for a 340. Hope he didn't spend too much time looking for the mark. An expert? Me? No, definitely not. But, I enjoy helpingpeople out. Kind of a bus drivers holiday I guess.

[Log in to Reply]  [No Email]
Hugh MacKay

02-20-2003 02:53:43




Report to Moderator
 Re: Re: Re: Instant Expert in reply to Gary, 02-19-2003 19:47:45  
Gary: That's what it all about, sharing what we know or don't know. I am not a mechanic. My first involvment with this old iron was in 1948 at six years of age, my dad plunked me in the seat of the old W4 on wagon and loose hayloader and said you drive and don't knock the guys on load over starting or stopping. Adjust the throttle as they tell you. My 72 year old grandfather had been doing this job and hired help on load were about to go on strike.

I later went on to own and operate that farm and in my day was 100 cow milking herd with 500 acres cultivated land and a 500 acre woodlot. Direct involvment of equipment repair and maintainence, was something I didn't get to do a lot of. Management of dairy herd and croping were my number one priorities. Equipment was left to specialists and hired help. They did answer to me.

Many of the items being discussed on this page had not yet happened to old Farmalls in my farming days. Example, my 560 and 656 still had generators and regulators that had never been off tractor, at 15 years. Hydraulic problems discussed here almost daily re: 06, 56, 66 and 86 had not yet happened in my farming days.

There is not a day goes by that I don't learn something on forums. Also almost daily I have my memory jogged on something I experienced many years ago. I operate on forums almost exclusively from memory. One item I am starting to realize is, I have forgotten more about these old Farmalls than some guys on here know. Not many, but some. I enjoy this interaction on old tractors. It is also great to see some guy, that knows little about a tractor, buy one for, yard chores, snow plowing or just sheer enjoyment. I never get upset on repeat questions. Yes the ignition on a Farmall H may have been discussed 2 days ago. There is always chance some one will enlighten us on something we have not seen before. If I have any criticism of forum participants, it is they are much to serious. Come on guys, old iron can be lots of fun, loosen up and enjoy. I have the opinion that many of you wouldn't laugh if some prim and proper person broke wind in church. Remember, your grand father who bought that Farmall when it was new, and often sweated damn hard to get it paid for. He knew one thing though, How to have a good belly laugh.

[Log in to Reply]  [No Email]
Did that once

02-20-2003 05:07:02




Report to Moderator
 Re: Re: Re: Re: Instant Expert in reply to Hugh MacKay, 02-20-2003 02:53:43  
"---wouldn't laugh if someone broke wind during church" -- luckily for me we were singing and it wasn't during the prayer!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy