TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

HEY FLOGGER

Welcome Guest, Log in or Register

Author

WILDMAN H

09-16-2002 12:24:28

Report to Moderator

CAN YOU TELL ME HOW TO GET TO OAKBORO,AND WHAT PULLING ORDER THEY ARE GOING WITH.HOPE TO COME PLAY THE GAME WITH SOME OLD FRIENDS.ALSO WHAT TIME DOES THE PULL START.

[Log in to Reply] [No Email]

Redbud

09-19-2002 08:30:47

Report to Moderator

Re: HEY FLOGGER in reply to WILDMAN H, 09-16-2002 12:24:28

Could ,Wildman H, post some pictures of the H puller and tell those of us,some things about it....I can't get to a tractor pull.....Maybe you would know some other friends who would take the time to show pictures and talk about them...a shut in....Thanks ---- Or send them to my friend's e-mail at.....dlcress@cinci.rr.com

[Log in to Reply] [No Email]

WILDMAN

09-20-2002 04:55:59

Report to Moderator

Re: Re: HEY FLOGGER in reply to Redbud, 09-19-2002 08:30:47

I DO NOT HAVE A SCANNER,BUT WOULD BE MORE THAN HAPPY TO MAIL YOU SOME.TRY CALL 704-309-1566

[Log in to Reply] [No Email]

farmallflogger

09-17-2002 08:44:35

Report to Moderator

Re: HEY FLOGGER in reply to WILDMAN H, 09-16-2002 12:24:28

Be looking forward to seeing yall there. BTW LW I hope you can make it. I think the good folks of Stanley County would enjoy seeing you pull. Like to see that bad machine again myself...

[Log in to Reply] [No Email]

09-16-2002 15:41:05

Report to Moderator

Re: HEY FLOGGER in reply to WILDMAN H, 09-16-2002 12:24:28

I heard you had to be registered by 9am, any word on the speed limit for the higher super classes, in or out for this pull, I'd like to know I have a local pull i can go too and not get dqd. for horn blowing,just would like to know not stirring the pot LW

[Log in to Reply] [No Email]

WILDMAN

09-17-2002 04:52:12

Report to Moderator

Re: Re: HEY FLOGGER in reply to LW, 09-16-2002 15:41:05

LW DON'T WORRY ABOUT THE HORN CAUSE I'M NOT .DON'T NEED THE TROPHY NO WAY .

[Log in to Reply] [No Email]

09-17-2002 17:40:43

Report to Moderator

Re: Re: Re: HEY FLOGGER in reply to WILDMAN , 09-17-2002 04:52:12

I'm not,I just think its funny that they only go 7.5mph the slowest I'm going is 9.5 , but you know I don't use low gear, looks like rain for sat. anyway.LW

[Log in to Reply] [No Email]

09-16-2002 18:32:37

Report to Moderator

Re: Re: HEY FLOGGER in reply to LW, 09-16-2002 15:41:05

LW, You can't get that tractor to idle that slow in low gear. Maybe you can try hooking to the slead with your front weight bracket and back down the track. You will still win, but maybe then the horn wont blow. Or you could take a couple of plug wires off and turn it into a 450 RPM hit-N-miss Moline. CASEPOWER

[Log in to Reply] [No Email]

THE Bulldog

09-16-2002 16:54:44

Report to Moderator

Re: Re: HEY FLOGGER in reply to LW, 09-16-2002 15:41:05

SATPA Antique Super Class speed limit is 7.5; Farm Stock 12mph; Antique Stock 3mph, plus there is a separate Antique Stock 5mph class.

[Log in to Reply] [No Email]

09-16-2002 18:27:37

Report to Moderator

Re: Re: Re: HEY FLOGGER in reply to THE Bulldog, 09-16-2002 16:54:44

What are the rules for farm stock and weight classes

[Log in to Reply] [No Email]

Farm Stock

09-17-2002 06:14:37

Report to Moderator

Re: Re: Re: Re: HEY FLOGGER in reply to LW, 09-16-2002 18:27:37

10,500 lb and 11,500 lb classes; 12mph; rpm's 2500 + 10 - What other info would you need?

[Log in to Reply] [No Email]

THE Bulldog

09-16-2002 13:53:33

Report to Moderator

Re: HEY FLOGGER in reply to WILDMAN H, 09-16-2002 12:24:28

Wildman - will step on Flogger's toes and answer your questions [hope he doesn't mind]. There's no way to get to Oakboro from where you are!!!! HA HA.... From Monroe, take/stay on 74 east to Marshville, Turn left on Hwy 205 North. Following 205 to traffic light in Oakboro. Turn left, will be 2.3 miles on the left.

Most likely the easist, if you were to go through Charlotte and get on 24/27 East, toward ALbemarle, go to town of Red Cross and turn right onto Hwy 205. Can't say for certain, but think it would be about 1.7 miles on your right at Hinson's Antiques.

The earlier you are there, the better chance you have for parking - late comers may have to unload tractors and go park outside.

Scheduled to start at 10am

The answer to your 2nd question sent separately.

Looking forward to lots of fun.

[Log in to Reply] [No Email]

Richard

09-17-2002 08:49:47

Report to Moderator

Re: Re: HEY FLOGGER in reply to THE Bulldog, 09-16-2002 13:53:33

Bulldog, While I am not trying to contradict your directions from Monroe to Oakboro-and based upon living in that area- the best way would be to go north on hwy 200, turn right on New Salem Rd about 5 miles out of Monroe (Just after you pass Emmanuel Church)then do not turn again untill the stop light in Oakboro. Turn left and the site is about 2.5 miles on the left.
See you there.

[Log in to Reply] [No Email]

Directions

09-17-2002 11:13:45

Report to Moderator

Re: Re: Re: HEY FLOGGER in reply to Richard, 09-17-2002 08:49:47

Richard, I knew that !!!!! Just wanted to see if anyone else would catch it (ha ha - thanks..... )

THE Bulldog [ready to pull - hope there's a BIG dryer nearby to get some of the rain off the track....]

[Log in to Reply] [No Email]

farmallflogger

09-17-2002 09:52:39

Report to Moderator

Re: Re: Re: HEY FLOGGER in reply to Richard, 09-17-2002 08:49:47

Hey Richard,

Are they gonna alow any John Deeres in the gate or not?

[Log in to Reply] [No Email]

Richard

09-17-2002 10:53:27

Report to Moderator

Re: Re: Re: Re: HEY FLOGGER in reply to farmallflogger, 09-17-2002 09:52:39

Flogger, I'm thinking about painting mine red. You recon that anyone might get suspicious? It's embarrassing to be out-pulled by those IH's all the time.

[Log in to Reply] [No Email]

farmallflogger

09-17-2002 13:35:02

Report to Moderator

Re: Re: Re: Re: Re: HEY FLOGGER in reply to Richard, 09-17-2002 10:53:27

Whew! Sure hope the JDchick doesn't see that!

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy