Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

M in 4350???

Welcome Guest, Log in or Register
Author 
Farmall Boy

12-22-2002 15:02:56




Report to Moderator

We have a stock '39 M (lighter than all other M's except early 40's) with stock drawbar. We have removed the belly pump, lights, and belt pully. We have 14.9 tires and pressed steel rims and massey harris 44 hubs. We are going to put a 460 front end with john deere b rims on. What else would we have to do to get it down into 4350. I weigh 160




[Log in to Reply]   [No Email]
CASEPOWER

12-23-2002 09:10:35




Report to Moderator
 Re: M in 4350??? in reply to Farmall Boy, 12-22-2002 15:02:56  
Massey 44 hubs are heavy. Weld ons suck but would weigh less..



[Log in to Reply]  [No Email]
joe

12-23-2002 09:07:19




Report to Moderator
 Re: M in 4350??? in reply to Farmall Boy, 12-22-2002 15:02:56  
here are a few things to think about
1)the hand crank shaft in the front bolster
2)water in the raditor weighs less than anti frezze
3)each gallon of oil in the rear weighs 8 plus pound
4)air cleanner
5) fuel tank bracket
dont look for 50 pound look for 5 here and there



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy