Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

Push rods

Welcome Guest, Log in or Register
Author 
Dave

03-21-2003 19:44:39




Report to Moderator

I am having my IH 400 gas head shaved .100thou. Do I need to change my push rods to a shorter rod to compensate for the thinner head? I really appreciate all the excellent advice I get from these posts. Thanks!!!




[Log in to Reply]   [No Email]
I don't believe so, it's not alot taken off.

03-24-2003 13:42:01




Report to Moderator
 Re: push rods in reply to Dave, 03-21-2003 19:44:39  
.



[Log in to Reply]  [No Email]
Cody Adgent

03-25-2003 13:12:47




Report to Moderator
 Re: Re: push rods in reply to I don't believe so, it's not alot taken off., 03-24-2003 13:42:01  
You will have to put a flat washer under your rocker arm stands, so the valve wil adjust out right. Other than 4 cheap washers, that should be all you'll have to do.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy