TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Power block for mm

Welcome Guest, Log in or Register

Author

J T

03-23-2001 20:41:08

Report to Moderator

If I put 403 jugs on a U is that legal or cheating. If I put a 800 in a GB D is that legal or not. Stroke a G stroke an A or B that is ok I guess I think I have figured out tthe rules. JD can do what ever but everbody else toe the mark. Just make it a 2 cylinder class to simply things. I have something Burns can stroke. JT

[Log in to Reply] [No Email]

burns

03-25-2001 08:39:49

Report to Moderator

Re: power block for mm in reply to J T, 03-23-2001 20:41:08

Hey JT, I guess my email apologizing for going to far with my replies was ignored by your last little comment in your post. If you thing I was f__cking with you the last time, I'd give GTaylor a call to setup therapy times.
By the way, you keep playing with your 3-4" MM stroke and I'll be satisfied with my 7" stock stroke.

You can't judge whether or not you are cheating by another brand. Because you seem slow, if you break the rules you are cheating!

[Log in to Reply] [No Email]

LDL

03-24-2001 14:42:51

Report to Moderator

Re: power block for mm in reply to J T, 03-23-2001 20:41:08

It seems our club, which is controlled by JD pullers, changes the rules when it benefits one of their tractors or a friends tractor. Alot of the originators of the club have long since quit because of this. I used to pull against 20 to 30 tractors in a class that now is at best a dozen.

[Log in to Reply] [No Email]

Babbitt Rod

03-24-2001 05:28:10

Report to Moderator

Re: power block for mm in reply to J T, 03-23-2001 20:41:08

I wonder why a very small persent on the mighty 4 cyl. and the super 6 cyl. people have this fear of getting out pulled by a 2 CYL.TRACTOR. All tractor brands have had add on HP stuff avalable through out there being. Even the lowely N series Fords had a 100 HP V8 option.

[Log in to Reply] [No Email]

Gary

03-24-2001 02:40:36

Report to Moderator

Re: power block for mm in reply to J T, 03-23-2001 20:41:08

Welcome to the reality of Antique Tractor Pulling
Deere guys usually cheat first,cheat the most and
cry the loudest when anyone else does.

[Log in to Reply] [No Email]

Deerepower

03-25-2001 16:15:07

Report to Moderator

Re: Re: power block for mm in reply to Gary, 03-24-2001 02:40:36

It is people like you that start stuff cause a 2 Cylinder just kicked your -ss. Then you start crying,throw a big fit and the rules get changed then you blame it on the Deere guys. Well you can do all the crying you want cause when it is all over we still kicked your -SS.

[Log in to Reply] [No Email]

Gary

03-25-2001 16:42:07

Report to Moderator

Re: Re: Re: power block for mm in reply to Deerepower, 03-25-2001 16:15:07

Hey DP where you been? I missed you sorta like the
time I had the boil took off my butt,really missed
it! Hee hee hee!

[Log in to Reply] [No Email]

Will

03-25-2001 18:08:52

Report to Moderator

Re: Re: Re: Re: power block for mm in reply to Gary, 03-25-2001 16:42:07

Say gary did you notice that boil you had gotten off your butt was really your tractor.

[Log in to Reply] [No Email]

Deerepower

03-25-2001 16:51:02

Report to Moderator

Re: Re: Re: Re: power block for mm in reply to Gary, 03-25-2001 16:42:07

YOU are so full of it.

[Log in to Reply] [No Email]

burns

03-25-2001 16:50:08

Report to Moderator

Re: Re: Re: Re: power block for mm in reply to Gary, 03-25-2001 16:42:07

Hey Gary, if your behind is sore JT can stroke it for ya.

[Log in to Reply] [No Email]

Gary

03-25-2001 18:11:08

Report to Moderator

Re: Re: Re: Re: Re: power block for mm in reply to burns, 03-25-2001 16:50:08

Hey burns seems like you 2 got a thing going,I'm
not going to pass judgement on your personal likes
but its not for me!

[Log in to Reply] [No Email]

Deerepower

03-25-2001 16:52:52

Report to Moderator

Re: Re: Re: Re: Re: power block for mm in reply to burns, 03-25-2001 16:50:08

I was thing that he might do one better than that

[Log in to Reply] [No Email]

G Taylor Gary thank goodness you never cheat

03-24-2001 23:30:04

Report to Moderator

Re: Re: power block for mm in reply to Gary, 03-24-2001 02:40:36

Thank goodness it's easy to pickout the cheaters, just look for green paint. Everybody else is always legal.

[Log in to Reply] [No Email]

Gary

03-25-2001 03:40:08

Report to Moderator

Re: Re: Re: power block for mm in reply to G Taylor Gary thank goodness you never cheat , 03-24-2001 23:30:04

No,I was just needling you guys,but the rules game
is pretty aggravating at alot of places.If you are
one of the "group" there is one set of rules and if you aren't part of the "group" then you and your tractor are treated differently.Since the vast majority of the tractors at the pulls I go
to are JD and Farmalls the "improvements" to these
tractors are ignored,while the "offbrands" are inspected pretty close.There have been several pulls where my tractor was the only one RPM checked [have always passed]while there were others there who were obviously over and were
ignored.I pull just because Its fun and have a good time whether I win or come in last,but I'll
have to say there is alot of satisfaction taking
a tractor I have a $1000 in and beating someone's
$15000 machine.

[Log in to Reply] [No Email]

Babbitt Rod

03-25-2001 03:49:54

Report to Moderator

Re: Re: Re: Re: power block for mm in reply to Gary, 03-25-2001 03:40:08

Gary, you sure whine a lot on here for somebody that just pulls for fun.

[Log in to Reply] [No Email]

Gary

03-25-2001 08:30:18

Report to Moderator

Re: Re: Re: Re: Re: power block for mm in reply to Babbitt Rod, 03-25-2001 03:49:54

Why else would you Antique pull,it sure ain't the
money!I just feel there should be the same set of
rules for everyone and be adminstered fairly,which
is not happening at alot of pulls these days.Hey
I'd even go to bat for you if I thought you were
being wronged at a pull we were both at.

[Log in to Reply] [No Email]

Will

03-24-2001 06:00:48

Report to Moderator

Re: Re: power block for mm in reply to Gary, 03-24-2001 02:40:36

Say jt and gary. I still have them crying towels for you guys sounds like you fellas need them.I'll need your e mail tho so i can send them.

[Log in to Reply] [No Email]

art

03-24-2001 18:03:40

Report to Moderator

Re: Re: Re: power block for mm in reply to Will, 03-24-2001 06:00:48

U don't need any fancy stuff on a Moline to compete with (defeat) the JD G's. U heads and jugs are fine, just add a little stroke with an MM G crank. Don't win all the time, but it gives the G's all they want. Drives em crazy that U can do it with junk yard parts. aRt

[Log in to Reply] [No Email]

03-25-2001 09:19:26

Report to Moderator

Re: Re: Re: Re: power block for mm in reply to art, 03-24-2001 18:03:40

At least we don't have to run a 15 speed Roadranger on our G's .

The 88's get pretty pricey..... ....don't they..... ....aRt?

[Log in to Reply] [No Email]

art

03-25-2001 12:13:56

Report to Moderator

Re: Re: Re: Re: Re: power block for mm in reply to al, 03-25-2001 09:19:26

13sp aL, low direct overdrive. did away with it for weight reasons. just run over drive now. U haven't seen the last of ol olie, just goes slow like U now. aRt

[Log in to Reply] [No Email]

03-27-2001 19:12:13

Report to Moderator

Re: Re: Re: Re: Re: Re: power block for mm in reply to art, 03-25-2001 12:13:56

sounds like you need to have the tractors that win first three or four places pulled down to see who is cheating and knot by color

[Log in to Reply] [No Email]

03-25-2001 18:52:43

Report to Moderator

Re: Re: Re: Re: Re: Re: power block for mm in reply to art, 03-25-2001 12:13:56

aRt,
I know it was 13 but It made the story better, To bad you had to take it out,I loved to watch you downshift near the end ,got so it was quicker than a IH TA with lots more choices.Funny nobody else uses it.

Are U using U as a double meaning?

[Log in to Reply] [No Email]

aRt

03-26-2001 19:38:44

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: power block for mm in reply to al, 03-25-2001 18:52:43

U-bet

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy