Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

MH 44 Heads

Welcome Guest, Log in or Register
Author 
Mike B

10-05-2001 17:23:56




Report to Moderator

Was there a propane head made for the massey 44 ?Are they any good for pulling? Thanks!




[Log in to Reply]   [No Email]
Masseypuller

10-05-2001 17:44:03




Report to Moderator
 Re: MH 44 Heads in reply to Mike B, 10-05-2001 17:23:56  
Mike -

There is no special head for a factory propane powered 44. There is an H260 gas head (44's) and an H277 gas head (some 44Sp's and 444), but even these have only minor cosmetic difference (temp gage port location) and are completely interchangeable. The propane tractors used dome pistons to bump there compression, it was not "in the head". However, with some minor head work, the right cam, some manifold work, and a good carburetor (not stock Zenith!) it is possible to get 70+ HP on the dyno (at 540 PTO RPM) out off the H277 combination. Email me for additional information....

Regards,

Masseypuller

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy