TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Pulling Discussion Forum

Farmall H/ 300 manifold

Welcome Guest, Log in or Register

Author

Farm w/Junk

02-11-2004 18:31:25

Report to Moderator

Hi I was wondering if the manifold of a 300 utility will fit an H? Will there be and advantages to having it? Will a 300 or 350 cam help much? Thanks
Matt

[Log in to Reply] [No Email]

FULLPULLER#1

02-12-2004 17:56:08

Report to Moderator

Re: Farmall H/ 300 manifold in reply to Farm w/Junk, 02-11-2004 18:31:25

Yes, 300,350,SH,all work on an H , as well the cams will go right in.....Now if your looking to boost up your H then this is what you do,,bolt the 350 head,manifold,cam and carb on your H block, you will pickup some power and torque,to get the best out of your H with these parts, you will need to stick the 350 motor and all in your H and pull it,If you can't pull this because of your clubs rules,then take your H motor, throw out the sleves and bore the holes out to a safe limit and install new pistons with a 1/4 inch dome bolt the 350 head,manifold,carb,and cam on and PULL!,,don't forget to dial in your cam at about 102dg, this will give you some good low end. Hope this got ya thinking.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy