Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Pulling Discussion Forum

Building a Chrysler flathead 6

Welcome Guest, Log in or Register
Author 
ChadS

02-26-2004 19:30:30




Report to Moderator

Well, finally talked my brother in law into building a stroker engine for his Massey 101 puller. He, as of many others is in search of more HP. The massey has a Chrysler flathed 265, and is bored .040. bigger cam, and a Zenith updraft carb. It is about 60hp at 540, and pulls very well. Anyway, he brought up a spare 265 block to start measuring out clearance work. I took some time this afternoon, and done some clearance work, got 4 cyls cut out for more room. from what I can tell, a 3/4 stroker(3/8 offset) may work well. But thew rods are no where near usable in this build up. Just too darn long. The piston have a very low compression height. may have to do some rod searching. ChadS

[Log in to Reply]   [No Email]
Pete

02-27-2004 04:54:43




Report to Moderator
 Re: Building a Chrysler flathead 6 in reply to ChadS, 02-26-2004 19:30:30  
Shoot me an email. I am building one as we speak. I have a couple of rod combos that might work for you.
Pete



[Log in to Reply]  [No Email]
770 Puller

02-26-2004 20:26:19




Report to Moderator
 Re: Building a Chrysler flathead 6 in reply to ChadS, 02-26-2004 19:30:30  
Chad, We are at 90 hp might be able to help.
bryant@conninc.com
BG



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy