Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Pulling Discussion Forum

HEY CHAD- ESPLAIN THIS

Welcome Guest, Log in or Register
Author 
B ABRENIE

06-26-2005 05:08:20




Report to Moderator

LET'S SEE NOW, YOUR OFFERING PERFORMANCE PRODUCTS TO TRACTOR PULLER'S !
NOW ARE ALL THESE GUYS PULLING DIVIDION (2) AND OR ARE SOME PULLING IN OUR CLUB !
IF I READ THE CLUB RULE'S WHERE I LIVE !
(APPEARANCE)
GENERAL FARM TYPE WITH ABSOLUTELY NO ALTERATIONS!
THAT'S WHAT THE RULE STATES !
NOW THATS NOT WHAT I SEE !
NOW IF A GUY WANT'S TO OVER HAUL AN M MOTOR, WITH NOTHING FANCY IN IT , THEN, IF HE HAS JUST A FEW MARBLES IN HIS HEAD, AND CAN BALANCE A TRACTOR, HE OUGHT TO DO JUST FINE !
CORRECT !
THE MONTH OF JULY IS HISTORY FOR ME ! THREE WEEKENDS ARE ALREADY USED UP!
THAT LEAVES NINE PULLES LEFT IN THE SEASON !
FOR ABOUT SAY 700.0 BUCKS I CAN BE ON BOARD BY AUGUST -3RD ! 700.0O INTO 36 HOOKS = $19.44 PER HOOK PLUS FEES !
KINDA CHEAP ENTERTAINMENT , IF I REALLY READ THESE RULES, IT SURE WOULD AGGRIVATE ME TO WATCH CHEATERS PULL ! BUT THAT'S OKAY !
I THINK, TO PROVE A POINT, IT WOULD BE A GREAT IDEA ! JUST TO GO AHAEAD WITH A STOCK PLAN !
NOW WHAT DO YA THINK !
CAN A STOCK S-M WITHOUT A PROPANE HEAD, STAND A CHANCE IN 7000LB CLASS, AGAINST A MIGHTY MOLINE !

[Log in to Reply]   [No Email]
TONY J

06-26-2005 05:46:53




Report to Moderator
 Re: HEY CHAD- ESPLAIN THIS in reply to B ABRENIE, 06-26-2005 05:08:20  
sounds like someone got beat yesterday



[Log in to Reply]  [No Email]
ChadS

06-26-2005 07:08:19




Report to Moderator
 Re: HEY CHAD- ESPLAIN THIS in reply to TONY J, 06-26-2005 05:46:53  
Barenie has one of the nicest Super M's around, Ive seen that SM just flat out get with it, whoop em all, in what, 3 classes that year at South Bend,, right,, Bud?? Bud has his SM apart, but Im sure, when he comes back to NIATPA, He will be one to beat. A moline to worry about??? No, I think you should be worried about the Case. Yeah, we do offer quite a bit for enhancement for any division of pulling, mostly in div 1,2 and 3. As far as the rules, and how to interpret them, it says, stock in apprearence. Which basicly means, you have to look stock onthe outside. Do what you gotta do on the inside. The track rules, is what makes the field a bit leveler, When you see "old" modifieds, change tires hitches etc etc, and go back to farm stock, well, what can I say? Meets the rules as far as hitch, tire size, rpms, for the farm stock class. it dont mean that they are going to win it right off the bat, just by putting the enhanced tractor in the class,,,, it means, that now, they have a whole new ballgame to try and make all the HP hook up in a very very slow first gear,, from what Ive seen, the MM should have stayed in the mods, where he can go up a gear, or two?? Im sure DC dont mind whoppin on a tractor like that. One of these days, that MM will git r done, but I do not see it as a fierce competitior as it once was, like when it was in the mods. So, what does that tell you? stock in appearance,,, yet, who knows what on the inside. As long as the track rules, and the tractor set up for those rules, pull, win lose or draw, someone wins,, right? Bud, just remember how that SM of yours ran at South Bend,, you blind eye tuned that tractor, and put it inthe top 3, and it still wasnt just right, but was darn close! I admit, there is alot of stronger than stock tractors on our pulling circuit,, everyone knows it, so, do what you feel is best on what to build. Yeah, I think a good 264, or a 281 can do the job in this club. We all look forward to see what you have decided to run, and show how to do it. I hear its HOT down south,, so,,, dont drink the water,, and uh, sunblock??? LOL! Have fun Barenie! Thats what its all about! ChadS

[Log in to Reply]  [No Email]
B BARENIE

06-26-2005 13:18:53




Report to Moderator
 Re: HEY CHAD- ESPLAIN THIS in reply to ChadS, 06-26-2005 07:08:19  
THANKS FOR THE REPLY !
DROPPED 15-20 TREE'S YESTERDAY, THE BIG CHALLANGE WAS TO GET THEM TO FALL WITH IN A FOOT OF HOW I CUT THEM TO FALL ! DID PRETTY GOOD, ONLY HAD ONE SLIDE OFF THE BASE, MISSED THAT ONE BY FOUR FEET !GOT 5 KIDS GOING ALONG, IN THE 22-25 YEAR OLD RANGE, ONE PASTOR, AND TWO EXPERIENCED CONTRACTORS. IF THERE'S A TD-9 DOWN THERE, I CHANGE THE ENTIRE FACE OF MEXICO !
IT'S GOING TO BE A HELL WEEK NO MATTER WHAT, EITHER A WEEK OF 100DEGREE + WEATHER OR RAIN !
APPREACIATE THE REPLY !
SURE IS GREAT TO HAVE THAT SWEAT POUR OFF THE BODY ! EVERY BIT AS GOOD AS PULLING FOUR CLASSES AND MOVING ALLLLL THE IRON !
HAD A BAD MORNING AT CHURCH, PASTOR LADED DOWN THE HAMMER !GOING TO BE AN ALTER CALL NEXT SUNDAY ! READING IN THE BOOK OF JUDE ! EITHER GET IN VOLVED IN REAL SERVICE FOR GOD OR MAYBE FIND ANOTHER CHURCH ! COMMITTMENT, KINDA PUTS THE TRACTOR STUFF IN A DIFFERENT LIGHT !
BUT ANYWAY THATS ANOTHER STORY !
HAVE A GOOD SUNDAY AFTERNOON !
BUDDY B

[Log in to Reply]  [No Email]
ChadS

06-26-2005 16:31:25




Report to Moderator
 Re: HEY CHAD- ESPLAIN THIS in reply to B BARENIE, 06-26-2005 13:18:53  
GIT R DONE!!!!! !!!!! Just make sure you yell TIIIMMMMMBEEERRRRR R!!!! real loud! ChadS



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy