TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Denny's

Welcome Guest, Log in or Register

Author

03-11-2002 13:10:05

Report to Moderator

Is Denny's Carb. Shop as bad as some people say?
I have heard a lot of bad things about him, but not many good things. I have seen his catalogue and some of his prices don't seem to be too bad.
Is anyone willing to reveal personal ecperiences in dealing with Denny's quality, prices and service?
Thanks in advance for any info.

[Log in to Reply] [No Email]

What about the torque pipe?

03-13-2002 13:45:23

Report to Moderator

Re: Denny's in reply to 88, 03-11-2002 13:10:05

Does his torque pipe really work?$49.95 he is getting for them I believe.

[Log in to Reply] [No Email]

Stephen G

03-13-2002 17:19:26

Report to Moderator

Re: Re: Denny's in reply to What about the torque pipe?, 03-13-2002 13:45:23

What is a Torque pipe I have John Deere G would that help me in the Stock class . Thanks Stephen G

[Log in to Reply] [No Email]

burns

03-13-2002 14:05:24

Report to Moderator

Re: Re: Denny's in reply to What about the torque pipe?, 03-13-2002 13:45:23

At the NY expo there was a G with an unstyled A front end that had his torque pipe mounted. I talked to the original builder (which is a respected Deere builder and parts supplier) who claimed a 3-5hp gain. He wouldn't of believed it had he not done the dyno tests with and without the pipe.

[Log in to Reply] [No Email]

Mike F.

03-13-2002 19:30:59

Report to Moderator

Re: Re: Re: Denny's in reply to burns, 03-13-2002 14:05:24

If a respected builder claims 3-5 hp, I bet Denny's will give 10-15hp.

[Log in to Reply] [No Email]

mpj

03-12-2002 18:15:50

Report to Moderator

Re: Denny's in reply to 88, 03-11-2002 13:10:05

I called him once about heads advertised on his web site. The woman told me he wasnt there then this miserable old jerk came on and gave me this outrageously high price and I realized all of the stories about this jerk may not be far off.

[Log in to Reply] [No Email]

burns

03-12-2002 17:51:44

Report to Moderator

Re: Denny's in reply to 88, 03-11-2002 13:10:05

I wanted my distrib. recalibrated for my tractor. Denny's wanted something like $235 without adding the electronic ignition. I had Motec do it for $25 and have been extremely pleased.

Phil must be Denny

[Log in to Reply] [No Email]

03-12-2002 16:27:08

Report to Moderator

Re: Denny's in reply to 88, 03-11-2002 13:10:05

I had a distributor rebuilt by him with an electronic ignition. It works fine and all, new guts, etc. But the reason I went to them was because the timing advance springs in the distributor were rusty and broke. After calling everyone I could not find new, I figured they must have them if they do rebuilds, so I called them and the secretary/? dicked me around and said they didn't sell them separate. kinda stupid, i sent my distributor ,got it back and all, its nice but i think it was set up 180 degrees off since i had to put the plug wires on different plugs, In all i can definatly see where they are out to screw you and do it hard, their prices are kinda hairy for sure!

[Log in to Reply] [No Email]

Slo

03-12-2002 15:00:21

Report to Moderator

Re: Denny's in reply to 88, 03-11-2002 13:10:05

Several people have been less than happy with his carb work. Apparently, some have received good service.

I know of an M that was stroked and bored, and the carb sent off to Denny after the motor was done. The governor went also. The carb dynoed 8 hp less after the high dollar pulling modifications, and that was at the best he could find on the dyno. The carb he got back was painted with a new sticker, but not even clean inside, let alone a high dollar rebuild job. He was also dissatisfied with the governor after it was returned. And to get his carb and governor back took several phone calls, a long time, and a lot of aggravation. He ended up replacing the governor with a M&W governor, and sent the carb to another carb shop to get rebuilt and have it built up for pulling.

I do know that on another website there was mention made of a petition going around to some pulls to send to the Hook and some other magazines to request that they stop accepting advertising from Denny's.

[Log in to Reply] [No Email]

Baystatebinder

03-12-2002 05:20:41

Report to Moderator

Re: Denny's in reply to 88, 03-11-2002 13:10:05

I have bought a number of products and services from him and have been extremely happy with his products. The results speak for itself. I realize that sometimes you pay more for his products than you can find elsewhere. However my time is limited like most other peoples and I get get the right product the first time and not have to do a whole buch of calling and research.

[Log in to Reply] [No Email]

Baystatebinder

03-12-2002 05:22:20

Report to Moderator

Re: Denny's in reply to 88, 03-11-2002 13:10:05

[Log in to Reply] [No Email]

Phil

03-11-2002 20:15:25

Report to Moderator

Re: Denny's in reply to 88, 03-11-2002 13:10:05

I sent a carb to dennys. Got it back with a good paint job but it did not work any better than when I sent it. When I took it apart, it still had the old gasket and it was not rebuilt. When I call dennys they told me to F***-Off. Why don't you call Dennys and ask him why everybody thinks he is a crook.

[Log in to Reply] [No Email]

randy hall

03-11-2002 19:04:55

Report to Moderator

Re: Denny's in reply to 88, 03-11-2002 13:10:05

some things are a little high priced,but tractor pulling is like racing- the more power you want the more it's going to cost you. i haven't bought anything from denny's lately but everything i have gotten from him worked ok. i think its a good place for a beginning puller to get a good carb rebuild and a good job on a distributor.

[Log in to Reply] [No Email]

Phil

03-11-2002 17:14:29

Report to Moderator

Re: Denny's in reply to 88, 03-11-2002 13:10:05

We have delt with denny a few times and have been very satisfied everytime. As a matter a fact we have got very good rebuit carbs from denny and nothing but junk from motec who I will not deal with again. That just my 2 cents.

[Log in to Reply] [No Email]

Jeff

03-12-2002 16:45:27

Report to Moderator

Re: Re: Denny's in reply to Phil, 03-11-2002 17:14:29

Leave your e-mail and We might belive you!

[Log in to Reply] [No Email]

The real Phil

03-11-2002 20:24:47

Report to Moderator

Re: Re: Denny's in reply to Phil, 03-11-2002 17:14:29

Isn't it funny that you bring up motec when he asked about dennys. Dennys make you pay before you get your carb. He has your money when you figure out you've been screwed. See what happens if you ask him if you can pay AFTER you try the carb.
Dennys is only after your money. He is a jerk and would screw his own mother for a dollar.

[Log in to Reply] [No Email]

Mfarmallpuller

05-05-2003 09:12:09

Report to Moderator

Re: Re: Re: Denny's in reply to The real Phil, 03-11-2002 20:24:47

I was about to order a bunch of stuff from denny's for my M, I am glad I happened to be reading this forum does anyone know of another good place I can buy the intake/exhaust header , a bigger carb, cam , and possibly the electronic ignition, these are just some small upgrades for now, I have already had head work done , shaved and bigger valves put in, didn't notice a lot more power but a little. Anyone have any recommendations
Thanks

[Log in to Reply] [No Email]

pullr

03-11-2002 16:41:16

Report to Moderator

Re: Denny's in reply to 88, 03-11-2002 13:10:05

They are definitely high priced on certain things. i bought a set of front aluminum rims that were $50.00 cheaper than what they priced them at and i got them from the same place they do. Their service wasnt the greatest either. I asked them a few questions about their products I wanted to buy and all they said was "I dont know". If they make it...they should know. I guess they didnt want my $500.00 bucks

[Log in to Reply] [No Email]

NEVER HAPPY

03-11-2002 14:54:26

Report to Moderator

Re: Denny's in reply to 88, 03-11-2002 13:10:05

SOME PEOPLE JUST LIKE TO COMPLAIN NO MATTER WHAT YOU DO.FUNNY THOUGH WHEN YOU ASK THEM SOMETHING SPECIFIC THEY CAN'T SEEM TO COME UP WITH AN ANSWER.

[Log in to Reply] [No Email]

I don't think this page is big enough to list all the complaints

03-11-2002 14:21:07

Report to Moderator

Re: Denny's in reply to 88, 03-11-2002 13:10:05

[Log in to Reply] [No Email]

Mike F.

03-12-2002 08:10:33

Report to Moderator

Re: Re: Denny's in reply to I don't think this page is big enough to list all the complaints, 03-11-2002 14:21:07

He's getting like 26.99 or some outrageous price for a breakaway kill switch? I think a ten dollar bill at my local trailer shop is plenty, of course, his may be hopped up!!!!! !!!!. also heard it comes with instructions,imagine that.

[Log in to Reply] [No Email]

Billy

03-11-2002 22:59:55

Report to Moderator

Re: Re: Denny's in reply to I don't think this page is big enough to list all the complaints, 03-11-2002 14:21:07

I don't like spinach

[Log in to Reply] [No Email]

Jason

03-12-2002 18:22:14

Report to Moderator

Re: Re: Re: Denny's in reply to Billy, 03-11-2002 22:59:55

Just call and talk to that old bit#$ on the phone, you will see what a hateful old hag she really is. You will then decide no matter what he could do you, its not worth putting up with their arrogrant a$$.

[Log in to Reply] [No Email]

03-12-2002 20:24:24

Report to Moderator

Re: Re: Re: Re: Denny's in reply to Jason, 03-12-2002 18:22:14

good desciption of her

[Log in to Reply] [No Email]

Denny is a CROOK

03-13-2002 19:17:08

Report to Moderator

Re: Re: Re: Re: Re: Denny's in reply to cd, 03-12-2002 20:24:24

He wil rip you off. He is nothing but a Crook, that smokes dope and drinks whisky all day and tries to see who he can rip off. Don't ever by from him!!!!! !!!!! !!!!!

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy