Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Thought for you Allan

Welcome Guest, Log in or Register
Author 
R. John Johnson

03-30-2007 20:53:37




Report to Moderator

Allan

I have an idea that would maybe cut down on the noise on that monitor. Get an electrical switch with a fairly high amp rating. Fabricate a mount so that some portion of the twine tie arms or mechanism closes the switch when the twine tie is at rest. Run power to the existing full bale switch through the new switch.

When the baler is full the alarm will sound as before, but as soon as the twine tie starts the buzzer will cut out. The buzzer will start again once the tying is complete, but by then it is time to eject the bale.

Might be worth a try.

John

[Log in to Reply]   [No Email]
Floyd A tn

03-31-2007 06:22:51




Report to Moderator
 Re: Thought for you Allan in reply to R. John Johnson, 03-30-2007 20:53:37  
You could put a silent switch on the side of the box.. You would have to manually push the button, but you could stop the buzzing at any time after it starts.. They automatically reset to buzz again once the system has been recycled..



[Log in to Reply]  [No Email]
williamf

04-01-2007 04:23:37




Report to Moderator
 Re: Thought for you Allan in reply to Floyd A tn, 03-31-2007 06:22:51  
I would cheerfully pay extra for an optional "Acknowledge" button for the various alarms on a new car. Once it lets me know I've opened the door with the key in the switch it should be up to me whether or not I want to take it out. Bossy dern machinery.
Good luck, Wm



[Log in to Reply]  [No Email]
Allan In NE

03-31-2007 01:21:53




Report to Moderator
 Re: Thought for you Allan in reply to R. John Johnson, 03-30-2007 20:53:37  
Hey!

Well now, that is just a bang up idea!

Just another switch, but mounted in such a way, and in series, that breaks the circuit when the tie starts. That little tie arm cylinder is right out in the open where I could easily rig something up too.

Yeah, it would bark again when the cut is made, but it's better than listening to that thing squawk all thru the wrap.

Heck, let me do some research; maybe the auto-wrap models already have some kind of a "normaly-closed" switch, I don't know. ???

Anyway, please don't patent this idea before I get it on there. :>)

I'll post a picture when I get it all rigged up. You're a genius John! Thanks!

Allan

[Log in to Reply]  [No Email]
Pete in MD

03-31-2007 13:28:44




Report to Moderator
 Re: Thought for you Allan in reply to Allan In NE, 03-31-2007 01:21:53  
Allen,

I think you want a "normally open" switch that's held closed when the tie arm is at rest position.

Pete



[Log in to Reply]  [No Email]
R. John Johnson

03-31-2007 07:41:05




Report to Moderator
 Re: Thought for you Allan in reply to Allan In NE, 03-31-2007 01:21:53  
Allan

Check out the Autowrap on NH664 or 688 balers. They use a switch with an arm and a roller. These are Heavy Duty switches. Look under the main frame up front, above the pickup on the right side. Don't use a cheap switch. They will be exposed to the elements, dust and vibration. You don't want a wimpy switch going south Sunday afternoon with a whole bunch of hay ready to bale.

John



[Log in to Reply]  [No Email]
Allan In NE

03-31-2007 07:58:30




Report to Moderator
 Re: Thought for you Allan in reply to R. John Johnson, 03-31-2007 07:41:05  
Yepper,

I'm tracking with you. Gotta be that heavy-duty, weather resistant switch from NH.

Grand idea, by the way!

If I can get it rigged right, it will buzz at me when it is time to wrap, again when the cut is made. Just like the auto-wraps do. :>)

Thanks!

Allan



[Log in to Reply]  [No Email]
Cliff Neubauer

03-31-2007 15:27:02




Report to Moderator
 Re: Thought for you Allan in reply to Allan In NE, 03-31-2007 07:58:30  
I've never been around those balers but here is the online parts listing for them.



[Log in to Reply]  [No Email]
JoeBob/IN

03-31-2007 04:55:21




Report to Moderator
 Re: Thought for you Allan in reply to Allan In NE, 03-31-2007 01:21:53  
WW Grainger has several types of microswitches that can be wired NO or NC. I would get the pushbutton type, most only cost about $10.



[Log in to Reply]  [No Email]
Hoosier JD

03-31-2007 08:30:52




Report to Moderator
 Re: Thought for you Allan in reply to JoeBob/IN, 03-31-2007 04:55:21  
When I was in college, I worked at a radio station that had a light in place of the bell on the phone. That way, when the telephone rang, you would see a light and not hear the bell on the phone and have it go out over the radio when the mic was hot. Maybe something like that could be rigged up so you could see it, not hear it. Just a thought. Mike



[Log in to Reply]  [No Email]
Allan In NE

03-31-2007 08:57:31




Report to Moderator
 Re: Thought for you Allan in reply to Hoosier JD, 03-31-2007 08:30:52  
Hi Ya, Mike

The monitor has a bright light and quite a pronounced buzzer hooked in parallel.

The darned buzzer seems loud to me, but I would guess that is probably because I don't have the tractor/baler in operation. Just setting here in the yard with the key on.

Really doubt I want to "disable" either one as they more than likely work just fine under field conditions and are probably needed to get one's attention while in operation.

Allan

third party image

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy