|
| |
|
|
SAE
Grade
|
Markings
|
Tensile
PSI
|
Material
|
5/16 |
3/8 |
7/16 |
1/2 |
9/16 |
5/8 |
3/4 |
7/8 |
|
Brass
|
 |
60,000
|
Copper 63%
Zinc 37%
|
9
|
17
|
27
|
37
|
49
|
78
|
104
|
160
|
|
Stainless
|
 |
72,000
|
AISI 303
|
10
|
18
|
28
|
40
|
54
|
80
|
117
|
180
|
|
2
|
 |
74,000
|
Low
Carbon
|
12
|
20
|
32
|
47
|
69
|
96
|
155
|
206
|
|
3
|
 |
100,000 |
Medium
Carbon
|
17
|
30
|
47
|
69
|
103
|
145
|
234
|
372
|
|
5
|
 |
120,000 |
Medium
Carbon Heat
Treated
|
19
|
33
|
54
|
78
|
114
|
154
|
257
|
382
|
|
6
|
 |
133,000 |
Medium
Carbon
Tempered
|
24
|
43
|
69
|
106
|
150
|
209
|
350
|
550
|
|
7
|
 |
133,000 |
Medium
Carbon
Alloy
|
25
|
44
|
71
|
110
|
154
|
215
|
360
|
570
|
|
8
|
 |
150,000 |
Medium
Carbon
Alloy
|
29
|
47
|
78
|
119
|
169
|
230
|
380
|
600
|
|
10
|
 |
160,000 |
High
Carbon
Case Hardened
|
33
|
54
|
84
|
125
|
180
|
250
|
400
|
640
|
Safety Notes
|
These values are given in lb-ft and apply to clean
smooth lubricated threads on NEW fasteners.
The nut and washer must have equal or greater rating
then the bolt.
Consult your manual for material type
The values are for the fastener not the assembly.
Some assembles can not with stand the maximum clamping force.
The values for fine treads are slightly higher.
Compiled By Chris Klossner
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
Variable pulley for case 1530 skid loader
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|
|
