Farmall & IHC Tractors Discussion Board |
Re: Power steering valve thingy
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by T.B.W. on March 06, 2007 at 07:06:14 from (4.248.243.172):
In Reply to: Power steering valve thingy posted by markloff on March 05, 2007 at 17:04:11:
The Hyd. line from your live pump goes to a priority valve that sends about 3 gallon per min. to the power steering. You will need a return line fron the power steering motor to the tank. Your pump should be about 12 gal per min so that leaves 9 to run the loader or 3 point. I have live power on my M with a loader and the steering and the loader work at the same time. I got my parts at Steelwheelranch.com. Check with mike there and he will tell what you need. you will also need some Hyd. lines to complete everything. I got them at tractor supply. Plan to spend about $700 to make it all work. I had the pump that ran off the generator belt, but that didn"t work very well, always weak. Tom
Replies:
Home
| Forums
Today's Featured Article -
Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|