Re: It just SNAPED!!!!

Posted by williamf on March 09, 2007 at 05:07:38 from (69.19.14.27):

In Reply to: It just SNAPED!!!! posted by Andrew Z on March 08, 2007 at 17:41:17:

I don't need the swinging function on my H's drawbar, and often pull a heavily loaded trailer.
I've seen more than a few of these drawbars bent. (Mine was when I got it.) I don't think you can do that pulling anything, but backing a trailer is different.
Seeing all that, I've got the roller off mine hanging safe on the wall of the shed - if I need it I can put it back on. I modified the drawbar to carry more tongue load and to resist bending to the side. The previous owner had cut off the U part of another hitch and welded it to the bottom of this one; I had the drawbar straightened and another piece of bar stock welded to the bottom of it.
Good luck, Wm

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]