Farmall & IHC Tractors Discussion Board |
Re: Seal inside brake drum on an H
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Haas on June 18, 2007 at 19:01:04 from (12.65.30.162):
In Reply to: Seal inside brake drum on an H posted by PUTTER on June 18, 2007 at 15:16:29:
You get access to the seal by removing the brake drum. Likely you will have to take the seal out in pieces, as they are not so easy to remove. Don't try to remove the seal holder flange, as you can't do that without pulling the axle out so the bull gear can drop down out of the way of the pinion bearing cage/seal holder. I tried the self tapping screw system on my I-6 (like an M) That worked sort of, but the seal ended up coming out in pieces. When you put things back, in addition to the seal, be sure to get the fiber washer that goes under the brake drum retainer washer. If you don't put the fiber washer in there, oil can leak around the brake drum splines and you will still end up with a mess.
Replies:
Home
| Forums
Today's Featured Article -
Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|