Farmall & IHC Tractors Discussion Board |
How to mount Woods L59 mower on a Farmall 1945 A
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Walter Smith on July 01, 2003 at 22:49:10 from (168.192.56.211):
Just bought a used Woods L59 belly mower to go on our 1945 Farmall A. The previous owner had no manual to go with the mower. He used the mower on his 140. If anyone has a drawing on how to mount this mower, I would appreciate it. Here is how I have it now. I put the mounting bracket in front of the rear axle. This puts the idler pulley pointing toward the back. Bought a new belt from the local woods dealer. I put a 3/4 twist in the belt from the mower's center blade pulley to the upper idler pulley. I put a 1/2 twist from that pulley to the drive pulley. No twist from the drive pulley to the lower idler pulley. Then 1/4 twist from the lower idler pulley to the center blade pulley. I tightened it as hard as I could. The belt wants to ride up on the drive pulley and twist around. Maybe I'm not twisting in the right direction. HELP!
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|