Farmall & IHC Tractors Discussion Board |
Re: Super C Two Point Hydraulics
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by DHuth2 on August 19, 2003 at 20:39:59 from (198.81.26.207):
In Reply to: Super C Two Point Hydraulics posted by Bud on August 19, 2003 at 12:38:33:
I believe what you have there is a load check valve....its purpose is to prevent any oil from leaving the rod end of the cylinder unless there is a slightly higher pressure on the base end supply or vise versa. It will prevent cavitation of cylinder when you are lowering with a reduced GPM like when you are idling or when pump is not pumping. We use them alot on hyd. motors to lock them from turning or from overspeeding when turning an unbalanced load. The valve will have a shuttle and spring and a couple of seat assemblies sometimes using balls.I bet that if you have a two way cylinder and don't run tractor , the hitch will lower when you push lever now.Hope this helps....
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Winterizin Engines - To Drain or Not to Drain? - by Staff. Another great discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "Winter is fast approaching..for a gas tractor should the gas tank be drained and run the engine til the carb is dry or do the gas stabilizer products I've heard of work? (tractor will not be used til spring) any other tips for winterizing?? "
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|