Farmall & IHC Tractors Discussion Board |
Re: Distributor Woes
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by ChadS on December 05, 2004 at 05:54:54 from (66.228.96.168):
In Reply to: Distributor Woes posted by MagMan on December 04, 2004 at 17:26:28:
magMan, is it a delco, or IH? Seeing the springs, Im betting on IH, Is it a vertical distirbutor, or a horizonal mounted distributor? You may check to see if the advance limit pin is in the hole in the plate, sometimes, the rotor shaft will float upwards ,and fall out of the plate. it will explode the wieghts by having no stop to limit, the amount of travel inthe advance. Any IH distributor will fit, provided it is from the same, vertical mounted distributors, were usually delcos,,, and have a different drive gear on the shaft,, so keep an eye out for that if u get another one,, What do you need? Got quite a few laying around, Hope this helps why it does that,, dont know if that is what happened to yours,, ChadS
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Winterizin Engines - To Drain or Not to Drain? - by Staff. Another great discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "Winter is fast approaching..for a gas tractor should the gas tank be drained and run the engine til the carb is dry or do the gas stabilizer products I've heard of work? (tractor will not be used til spring) any other tips for winterizing?? "
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|