Farmall & IHC Tractors Discussion Board |
986 update...theres still a problem
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Spencer on January 31, 2006 at 17:03:20 from (24.39.216.214):
well i split the 986 the other day and found an oil leak coming from the transmission ipto shaft seal. so i cleaned the flywheel, clutch disk and pressure plate the best i could with brake cleaner. and also put shorter bolts in the pressure plate and flywheel. I put it all back together and adjusted the freeplay. Started it up and held on the brakes and put it in high 4th and it slipped for a couple sec then grabbed and wanted to stall the tractor. hooked it up to the dump truck and tryed pulling that in low 4th with a rolling start it pulled it then started slipping. The cab mounts seem to be alright. i got told that the hy-capapcity pressure plates started coming with blocks of wood in there some place. i don't ever recall takiing them out. Can it be the T/A also and how do i check it? i've heard of blowing air in the T/A tubes but i don't recall what tube air should come out of. Any suggetions and help would be appreciated thanks. Spencer
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|