Posted by Mike CA on November 11, 2009 at 11:51:07 from (99.28.152.102):
I took off the adjustable front wheels on my '44 H, and I'm going to replace them with clamp style wheels. I knocked the races out of the clamp wheels. And it was just the races. I took one of the hubs off a '39 H, so I know what it looked like when it came out.
When I took the adjustable hubs off, there was an extra... guide? Not sure what to call it. There is one on each side, right behind the race. These fit right over the spindle. They are not part of the bearing kits I purchased, so I don't know what, or why. Are they just for an adjustable hub, and won't fit in the clamp style hub? I would assume since the spindle is the same, they would fit.
Should I knock these "cups" out, and put them in my clamp wheels?
Here is the adjustable style hub. You can see the extra retrainer cup inside the race.
Here is the older clamp style hub. The races have been knocked out. (I haven't cleaned all the sand out yet... I'm getting to that)
And here is a picture of a bearing kit for one of the hubs. That retainer cup is not part of it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.