Posted by Tom Fleming on September 26, 2010 at 03:39:09 from (206.193.253.243):
In Reply to: H tires posted by Tyler Jackson on September 25, 2010 at 18:51:34:
Tires that are weather checked (cracked) vs. cut/punctured, are usually fine. Tires are made with an inner section that has the reinforced cords. Then the tread is applied. as long as the inner cords are solid and intact, they are fine.
As a couple of posters have already said, if they are not bulging (indication that the inner cords are cut or broken) then they are fine.
Now, if these are really old tires, and I mean from the 30's or the 40's, the tread can start to separate from the inner section. I have a F-20 that I am going to have to break down and buy tires soon. The outer tread rubber is starting to break off from dry rot. They hold air just fine, and run fine, but the exposed inner tire is going to be prone to puncture at some point.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.