10-4. It runs between the tranny and the final drive. I was going to suggest to put it in gear, let the clutch out and then step on each brake individually to see if one of the brakes makes the combine move forward but you say you lost both brakes so that idea's out. If it is a driveshaft have someone sit in the combine and put it in gear and let the clutch out. Then look at the driveshafts and see if one is just sitting there turning. If both of them aren't turning then look closely at the stub shaft coming out of the brake housing and going into the coupler. I'm not sure if you can see it or if the coupler is too close to the brake drum to allow you to see it. The brakes are manually operated brakes that are on each side of the tranny so if you lose the driveshaft or if a gear gives out in the final drive, you will not have any control with the brake on that side. The brakes never were too good on those old combines anyway, at least they weren't much good on the 105. If the shafts are OK, then you have bad brakes and something else in the power train is bad too. Jim
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.