Posted by BushogPapa on July 06, 2011 at 20:58:20 from (173.88.50.86):
In Reply to: O.T. for Gun Guru posted by JerryS on July 06, 2011 at 20:34:07:
The 1911 .45 cal. has been around for 100 years and needs some changes to be made for it to use anything other than "Ball" ammunition... I have no idea what model you purchased and what type projectiles you are shooting..Ball or Hollow Point..? The ejection port needs opened and the Barrel throat needs opened for Hollow Point ammunition.. The Russian ammo may not be up to normal pressures and that could have caused the Stove-Pipe. I have an American made AMT that I like very much (Stainless) that is reasonably priced.. A couple more..a Government 1911 and a Gold Cup.. Each, I use with different ammo.. The original test-firing was something like 13,000 rounds with NO malfunctions...but that was not a Springfield, it was a Colt.. I would place the AMT in there with any Colt.. You need to KNOW the 1911 and what it likes.. You need to use a Main Spring of the correct tension, to match the ammo you are using.. Target Loads or Full Loads..?? I prefer full-length guide-rods along with a rubber bushing... You can get yourself an RCBS (Rock-Chucker) Loader and re-load your ammo far cheaper than you can buy it....use lead bullets, they are cheaper than the Jacketed bullets, especially at Gun Shows..just load them for under 950 FPS.. The 1911 is always a challenge...it is probably the hardest pistol to SHOOT WELL.. it IS accurate but it takes much shooting to shoot one "Well"... With light loads and a Bushing, the spent casings will fall about 4 ft to the right of the gun.. For just a self-defense weapon, I would choose a 3" .410 Pistol.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors, A Woman's Touch - by Teri Burkholder. I thought I would give you a little background on how I got myself hooked on tractors and their restoration. My family is a very "crafty" bunch of people. By crafty I mean good with crafts!! My Dad is a retired industrial engineer from Bucyrus Erie which made big shovels for excavating and he is also a wonderful wood worker. My mom and my "guardian angel" has had her own ceramic shop for 30 years and is an excellent painter. With these skills always active in our house it was hard not t
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.