Well, my small bales are grass hay and weigh about 60# average.
We do have pasture, so my answer will be totally different if you have no pasture. After the grass has dried up in the fall I figure about 20# per horse per day. We do also feed some sweet feed when it gets really cold, about 2/3 of a 32 ounce plastic drink cup per day.
My neighbor makes and sells feed, the best combo (what he recommends) has oats, pellets, kelp, and molasses in it along with a little corn, etc.
If a "rescue horse" you will likely need to up the feed intake for a while to get it fattened back up. Go slow with the feed at first, no more than about 8 ounces at first and add a little more every couple days.
I am no horse expert, but that is what works for us. If the horse(s) are underweight PETA type people will call animal control. We go through this at least twice a year when the PETA types don't see a big round bale also setting out.
The compliance officer always has to come over to make the report, and now apologizes for having to check. He has said twice now the horses should actually lose a few pounds, but he knows we are just being hassled and he understands we have to somewhat overfeed them to try to keep PETA away. DOUG
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
