Posted by willie in mn on August 26, 2011 at 06:07:11 from (205.188.116.74):
In Reply to: Checkrow Planting posted by Fritz Maurer on August 24, 2011 at 20:29:52:
Other replies covered it pretty well, just a few items from my experience. My Dad planted with horses pulling a JD 999 until his last year. Sold his horses fall of 57, them bought a 290. The Regular was too wide to use wire, so switched to "power drop", still 40 inch spacing, but not cross checked. He always planted the headlands, 8 rows, first, using the drill function, 1 seed every 10 inches or so. Row closest to fence made a good line for placing the stake. When planting the main rows, stopped at last button before the #8 head row. Of course when cultivating, some of the head rows got run over while turning around, but third time through turned in same spot, so didn't knock down all that much. Third time through was a rough ride, as second time was crosswise, & wide open in "hi gear" with the Regular was a whopping 3 or 4 mph. Discing down those ridges was a rough ride too. He insisted that going diagnally did a better job of cutting stalks. Get the wrong angle, both tractor wheels hit the ridge at same time, or slight shallower angle hit ridge at different times, real rocking motion. WJ
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
