Posted by rumplestiltskin on October 01, 2011 at 07:20:31 from (96.14.235.223):
I have a friend who is looking to buy his first tractor. He asked me how many hours is too many.
My answer was that it depends on the history of the tractor. The hour meter on the dash, even if it works, doesn't tell you anything about how long it has been since -- well -- an engine rebuild, for example.
In my case, the hour meter is missing entirely from my older tractor. I don't recall ever bothering to look at the meter on my newer tractor. Both are over 50 years old and I've owned them for only a couple of years -- with no knowledge of their maintenance history -- so I consider the hours irrelevant.
I'm lucky if I get in 50 hours of seat time per year, so as long as I do an oil change, lube, ignition check, etc. every winter I figure I'm covered. If I ever did an overhaul or major maintenance, then I'd have a meaningful baseline to start from for tracking hours.
So, just as a ballpark and starting with a brand new tractor, how many hours do you think a gas tractor and a diesel tractor should operate before needing an engine rebuild? Or are there other fairly major things (transmission, hydraulics, etc.) that would tend to go out before the engine?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
