I had a problem with hard starting and one cylinder misfiring under heavy load on a B&S 17 hp boxer engine.
The thing was miserable cold starting, I had to keep the throttle closed to keep the cylinder pressure low and choke until it would idle off. Once running, it would miss on one cylinder under a heavy load. I changed plugs several times, (tried different brands and heat ranges) with no fix for the problem. I thought it had to be a weak mag coil, so I replaced that, but gained nothing. I suspect now that the flywheel magnets are weak, leading to the weak spark.(coil gap is correct)
I had plug fouling problems with a couple little 2 cycle engines, that were fixed by installing E3 brand lawn and garden plugs. I only tried them because of their guarntee that they would not foul, suspecting that they were just another non working gadget. I was wrong (happily :-) they cured the 2 cycle starting and fouling problems. I thought, they worked so well in the little 2 cycle motors, why not try them in that cranky B&S four cycle. I installed E3 plugs in it and immediatly saw a dramatic difference, I could now cold start it with the throttle open, allowing full cylinder pressure, and it started in the first few turns of the engine. The heavy load misfire on one cylinder is also gone. That set of plugs is in there for 5 seasons of mowing the lawn, still starts and pulls great.
In the case of the E3 plugs, their really are magic sparkplugs, that will in part compensate for a weak ignition system or some engine wear caused fouling. They might be worth a try, they work for me. :-)
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - History of the Cockshutt Tractor - by Danny Bowes (Dsl). The son of a very successful Toronto and Brantford, Ontario merchant, and himself quite an entreprenuer, James G. Cockshutt opened a business called the Brantford Plow Works in 1877. In 1882, the business was incorporated to become the Cockshutt Plow Company. Along with quality built equipment, expedious demand and expansion made Cockshutt Plow Works the leader in the tillage tools sector of the farm equipment industry by the 1920's.
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.