Posted by dave2 on February 26, 2012 at 13:27:30 from (79.240.128.118):
In Reply to: water line volume?? posted by El Toro on February 26, 2012 at 12:41:18:
OK.... Since it makes a difference...
Frozen line is fed off 20ft of 5/8 going into 3/4 30ft to stalls feed for outside faucet at stalls is stepped back to 1/2 (5ft) inch for no other reason than that is what I had OH at the time.
So, for the stalls, I guess I could step up the GPM considerably by feeding the faucet with the 3/4 inch??
Now, the backup... My water meter is 30ft from the mainline valve (under the street) fed by 1inch. Output is 1 inch but immediately stepped down. The 5/8 line (choke?) would only be about 6 inches where I want to run the backup from. Length of backup from the 5/8 piece to the faucet would be 15 ft. Primary use for these two faucets is filling water tanks for the horses and could use all the volume I can get to save time....
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
