The first two show a conflicting tale regarding manually removing air from the cylinder. I was always taught that cylinders must be pre filled, manually bled etc to remove air, which is the first link showing the hazards of using a cycling the double acting cylinders to remove air. It has become second nature, and I can safely say that the US Navy, the US Coast Guard, Waste Management do not allow cycling the cylinder to remove air. To the credit of my critics, however, I must cede that Precision Fluid Power list cycling as their method of removing air. Those are your first two links.
The third link is the brake down and repair procedure for cylinders. When they detail the procedure for ensuring the ram is true, it tells you to first check for a polished sign on one side of the ram. If you see the need to check for true in the ram. Everywhere I have done this the QA standard, which isn"t mentioned, is 0.002". If you have less, I have never had anyone that would not accept that as true. The link only says use fine emery cloth in a cross pattern. If you have a clean ram with only the minor scratch, I would use a 400 grit. If you have build up on the ram, and have to use a course sheet to get it to where you are at the metal expect scratches from the paper that you will be finishing with 400 grit. The rest of the third link should walk you thru the cylinder repair.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An AC Model M Crawler - by Anthony West. Neil Atkins is a man in his late thirties, a mild and patient character who talks fondly of his farming heritage. He farms around a hundred and fifty acres of arable land, in a village called Southam, located just outside Leamington Spa in Warwickshire. The soil is a rich dark brown and is well looked after. unlike some areas in the midlands it is also fairly flat, broken only by hedgerows and the occasional valley and brook. A copse of wildbreaking silver birch and oak trees surround the top si
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
