I cleared, or maybe more correctly "opened up" 12 acres so dense with brush and vines that at first I literally could not walk through it. I carved it into small sections I could control, opening up firelanes, raking them clean and, with the judicious use of an accelerant, burned it out just to be able to move through it. In some cases I was able to blast through with my old Sidewinder bushhog (it's really amazing what that thing can eat up).
The small trees I didn't want I either pulled up with my 8N or I cut them down with a chain saw, as close to ground as possible so I could maintain the area with the Sidewinder. I treated the stumps of the ones I sawed down with a product called Pathway---paint the cambium ring of the freshly-cut stump and they want sprout back out.
I learned that if you're not in a big hurry you can burn an area, wait about a year and a half, and you can walk through and push over trees up to about four inches. They just break off even with the ground.
It took about six years of weekends to finish this (actually I'm still cutting trees). I estimate I've burned more than 400 big brush piles.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
