The only thing that comes to mind, is that perhaps your cable company guy might have been concerned with, was the possibility of creating a "ground loop", which can become a problem because of a difference in potentials if not properly bonded, and HE stands an excellent chance of creating himself. It happens, and any one worth half of his or her own salt will not deny it. That being said, I don't know if that is what they were suggesting, but that is what comes to mind. As for using your conduits as a ground, that is not a preferred method, but can be a ground IF your conduits are tied together all the way back to your breaker panal, with the bare metal of the conduit in theory touching the bare metal of the panal where they meet, which no doubt has ground tied to it (panal). Again, that is not the preferred method because it depends upon a whole lot of "ifs" and quality metal used, for instance in the made in china conduit that most are using today anyway. That being said, and not knowing if your conduit is grounded or not, no one should ever assume that it is. Conduit generally makes a lousy ground and for obvious reasons, should be avoided. For electronic equipment, I will NOT share a ground with anyone, and generally run my own where possible, or use building structure steel where not. Other than through the power cord, I don't use electrical or telco ground, not will I ever use a conduit. I run my own.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - What Price Enthusiasm? - by Anthony West. Quite frankly, for some time now restorers like myself have become more and more concerned about the rapid increase in the prices of old farm machines here in England. There is now a growing market for "As found" machines. Which as machines get rarer, has found the birth of a new industry....one of the "procurement agent". These agents appropriate as much old machinery as possible then inflate prices at auctions. So at what price enthiusiasm? We are now seeing poor machines which 3 years ago ma
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.