Posted by jfharper on June 20, 2012 at 16:07:29 from (173.255.107.35):
Got a new hyd pump front mount for my mf 205 industrial, where both hoses came in from the left, if standing in front of the tractor looking at it.
The inlet is on the left side of pump and my 1.25" bulk hose will reach that just fine.
The outlet is SAE 12 F and is on the right side of the pump...I don't think I have enough hose to do a 180 degree turn so I was thinking about doing 2 elbows off the pump so the hose can reach.
The fitting from the outlet off the old pump is an elbow SAE 10 M which went in the old pump to -10 JIC M which hose attached to...and this fitting went on the top of the old pump.
So, how do I do the 2 elbows? Would there be a swivel involved somewhere so I could line things up when tight? I just can't wrap my mind around this...maybe someone could help me...thanks.
This post was edited by jfharper at 16:11:07 06/20/12 3 times.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
