Re: working on a New Holland 56 rake

Posted by charlie n on June 25, 2012 at 09:37:02 from (96.35.9.190):

In Reply to: working on a New Holland 56 rake posted by dhermesc on June 25, 2012 at 07:35:10:

Here's what I do. On one end or the other remove the pins that hold the joint to the wheel axle and the drive axle.Clean the drive axle with sand paper,lube it with kroil,wd40 any penetrating oil.Use a brass hammer or wood block and tap the joint back on the long shaft.Move it about an inch and it should come off. The parts aint cheap and make sure you get the right one.You'll need to measure the inner bore before you buy.Use this link.

Good Luck.

http://www.messicks.com/NH/3141.aspx

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]