Definitely slope away from the center. Concrete guys like to pour stuff flat and level, but don't forget that water needs to run off or it sets in one spot. Even if the floor looks to be dead-on, it will still puddle someplace. When designing “flat” surfaces on something like you are planning, we always figured at least 1/10 of a foot (about 1 & 1/4 inches) of slope to each 10 feet of run to keep water from puddling on the surface. In your 18 foot diameter crib, I would figure at least 2/10 of a foot of slope away from the center to the sides of the circle. 2 - 1/2 or 3 inches wouldn't hurt a thing in 9 feet and you will never notice the rise. If you pack your base well, you can slope that too and save a bunch of concrete. It’s REALLY IMPORTANT to have good base compaction to prevent the concrete from settling and cracking over time. I would also use wire mesh or plastic fiber in the concrete to aid in preventing cracks. The plastic stuff that is available works well for that. It’s less expensive than wire. (Talk to your redi-mix guy.) I’d use a six bag mix, too for a 4" floor due to the weight requirements. This advice comes from a retired engineering technician. (My $0.02 worth. jal-SD)
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An AC Model M Crawler - by Anthony West. Neil Atkins is a man in his late thirties, a mild and patient character who talks fondly of his farming heritage. He farms around a hundred and fifty acres of arable land, in a village called Southam, located just outside Leamington Spa in Warwickshire. The soil is a rich dark brown and is well looked after. unlike some areas in the midlands it is also fairly flat, broken only by hedgerows and the occasional valley and brook. A copse of wildbreaking silver birch and oak trees surround the top si
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
