Posted by rrlund on August 21, 2012 at 09:21:58 from (207.241.137.116):
I bought a tractor to restore. It'll be used a little,but mostly a trailer queen. It had been leaking coollant in to the oil. I pulled the sleeves and the block is pitted a little more than I'm comfortable with. I know some pullers use some kind of cement in the blocks when they bore them real thin. Is there anything that anybody knows of that could be poured in the bottom of the block,say maybe a quarter to a half inch thick while the head is off,to help seal the o-rings on the sleeves? Something like a liquid silicone that would gel up or something like that? Been thinking about running a ring of silicone around the top o-ring before I soap them up to put them in,but a pour in liquid that would set up would be a better option.
If it was something that I was going to use more,I know you can get them machined and get a bushing put in,but I don't want to go that far with this one.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.