Posted by Leroy on September 26, 2012 at 19:30:33 from (69.88.205.38):
In Reply to: Re: Mower question posted by wisbaker on September 26, 2012 at 13:27:16:
Wood was used for them to start with because it was easier for them to work with back in the 1800's. Pitmans are not supposed to break and if they do you have other problems. And NOT all mowers were made with wood pitmans, I have some that were factory steel. Your problem with plywood is that half the material is going crosswise of the pitman so on 1" of plywood you only will have 1/2" with the grain going the correct direction to do all the work so it will be very week to start with and likely break because it was not strong enough to start with and when it breaks is when you will break something else. Mowed with pitmans for years and NEVER broke a one. Had a few mowers that the pitman was rotted before I got them but always kept all machinery inside and never had one rot and that is most likely why a lot of people have problems with broken pitmans.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
