Posted by Ferd on December 10, 2012 at 11:20:41 from (50.39.120.213):
In Reply to: Concrete in December posted by G1050 on December 10, 2012 at 06:43:22:
I just looked up the weather for your area and it says 21° tonight and below freezing for the next few nights. So I'd guess your ground is frozen which eliminates any possibility of pouring a slab. Footings and stem walls you most likely can do if the excavated base isn't frozen and the weather doesn't get much colder than the high 20's. Generally it will be more likely to freeze the second or third nights than the first. If light frost, still cover the top of the forms. When concrete freezes, it turns white and is more or less a dust that you can rub off.
If it's a shop floor, I'd assume you'll be running heavy equipment on it. You'd be much happier a year or two from now if you don't hurry and cut corners at the expense of doing it right.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.