I would just get the cabinets up somewhere safe for now, dry them and wait until you have the time and means to finishing them. Cold damp weather really isn't the best time to finish cabinets. The cabinets will have water spots. When it's time to deal with the water spot, if the cabinets are going to be stained light in color or natural the first thing you're going to have to do is bleach the water stains. You could use household bleach but it would be more effective to use two part wood bleach and bleach the stain areas. Then the entire surface is going to have to be sanded to at least 180 grit sandpaper. Just the cabinets sitting in storage even if they had not gotten wet have gotten dirty and the humidity has raised the grain so it wouldn't stain evenly. The toespace on the front could probably be covered with 1/4" ash plywood once the cabinets are installed so you could skip that part if you wish. It's mainly the exposed ends you need to worry about. After the cabinets are sanded, I would use a pigmented oil stain like Sherwin Williams Wood Classics stain and then use a coat or two sanding sealer sanding it between coats with 220x stearated sandpaper and then put two coats of Sherwin Williams interior oil based polyurethane in a satin or semi-gloss sheen.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
