Posted by RVS on December 23, 2012 at 20:16:33 from (184.151.127.145):
I just bought a 1995 chev 3500 4x4 cab and chassis with a 5.0L gas engine 4 speed auto. with 154000 kms with an 8ft western plow.Bought it from the small town next to me. The mechanic said it sat for abouit 6 months off duty because the new truck came in early. He said it ran ok before it was parked but had a soft brake pedal.We were only allowed to start it in the yard before we bid on it, because of the soft brake pedal. I had it towed home and went to move it around the yard it backfired through the intake and stalled ,it did this a few times. went and got some new gas and inhjector cleaner and put it in it. starts right up every time. wasnt planning on useing it untill I had it looked at but my plow truck through a ujoint on an axle so.I grabbbed the new truck and started to plow.It has no power and wants to chug and fart ,when you apply the pedal.If you find the sweet spot with the throttle it will smooth out but still has no power it will die off under load. It stalls constantly but starts right up again. when you start and rev it up it feels like it is plugged up and a few revs and ease on the throttle it will smooth out.If you push it hard it will start to smell like burnt paint.When you start to move ahead or back it chuggs and then if you feather the throttle it will smooth out untill gets back under load and then it starts to chugg again. the exhaust sounds like it is not releaseing the exhaust. Any suggestions??
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.