Posted by John T on December 28, 2012 at 17:44:30 from (216.249.82.117):
In Reply to: Long arcing sparkplug posted by pete hall on December 28, 2012 at 16:09:22:
Professor Jim has a great explanation with which I agree (as we usually do) I will just repeat the concept in my own words.
When oil or excess raw gas or carbon (fouling) accumulates on the plugs ceramic/porcelain insulation, such creates a conductive shorting path for current flow. Normally in a non fouled plug when the coil fires its HV primary voltage begins to ramp up and if theres no bleed off current path (like fouling creates) voltage will rise to maybe 8,000 volts and suddenly theres a high temperature arc of current across the plug gap which ignites the fuel air mixture.
HOWEVER if the plug is fouled when the coil voltage just begins to rise all the coils stored energy gets dissipated as current through the fouling material (I squared R) and it never rises high to a point that theres an arc of curent acxross the gap, the voltage only rises to a relatively low value insufficient to arc the gap since theres that fouling material conducting current right from the get go.
HOWEVER if that shorting path is more out of the circuit due to the added wider air gap (like if plug wire is held away from plug) voltage is allowed to rise to that higher value sufficient to arc current across the gap and she goes ahead and fires.
To reduce fouling one might run a leaner fuel/air mixture (reduces black sooty carbon deposits on plugs),,,,Run the engine at a hotter temperature,,,,,,,,Use a higher heat range plug,,,,,,,,,,,Fix the oil burning problem (rings, valve guides etc)
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fordson Model N: Field Service Operations and Lubrication - by Anthony West. The daily or weekly servicing of any vehicle is of the utmost importance, and in days gone by when our favorite tractors were doing an important and Commercially vital job on the farm, these service operations would make a major difference to the running costs and economy of the farm. This being so, it surprises me to see how many enthusiasts attending rallies, shows etc, seem to be unaware of the importance of this constant attention. Possibly the modern machine with its 6,000 mile or even once
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.